From mboxrd@z Thu Jan 1 00:00:00 1970 From: Yann E. MORIN Date: Tue, 18 May 2021 15:23:44 +0200 Subject: [Buildroot] [PATCH] configs/beaglebone: bump kernel and U-Boot versions In-Reply-To: <20210516180952.22014-1-vincent.stehle@laposte.net> References: <20210516180952.22014-1-vincent.stehle@laposte.net> Message-ID: <20210518132344.GL2506@scaer> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Vincent, All, On 2021-05-16 20:09 +0200, Vincent Stehl? via buildroot spake thusly: > - Bump kernel to version 5.10.30-ti-r3. > - Bump U-Boot to version 2021.04. > > Add mdev to the beaglebone_defconfig. This gives us automatic USB support, > as the omap2plus kernel has most drivers as modules. > > While at it, enable VFPv3 with 32 registers (instead of 16) and add a few > comments to the defconfig. > > Signed-off-by: Vincent Stehl? > Cc: Yegor Yefremov > Cc: Lothar Felten Applied to next, thanks. > --- > I have tested on Beaglebone Black that UART, SD card, USB host, ethernet and > HDMI work fine. I don't have the other beaglebones so testers are welcome! Good enough for me, thanks! > For auto-loading the modules we could also use eudev to be a bit more aligned > with the '_qt5 defconfig but I think mdev is lighter. Let me know if eudev is > preferred. mdev is OK. > Also if you don't like the defconfig comments just let me know and I can > resubmit without them. I tend to prefer that we have 'raw' defconfig files, i.e. ones that we directly get from running 'make savedefconfig'. However, a few others prefer cefconfigs that have comments, so I've applied your patch with comments. TBH, I would like we get rid of comments, because it makes it more difficult to maintain and update defconfig files... But that's for another series, if at all... Thanks! :-) Regards, Yann E. MORIN. > This updates de-synchronizes the versions with the ones in the '_qt5 defconfig; > I hope this is ok. The '_qt5 defconfig is a bit more complicated to update as > we need to update the sgx packages in sync. This can be done later on. > > Best regards, > Vincent. > > > configs/beaglebone_defconfig | 27 ++++++++++++++++++++++++--- > 1 file changed, 24 insertions(+), 3 deletions(-) > > diff --git a/configs/beaglebone_defconfig b/configs/beaglebone_defconfig > index 9a4be13ec5..763696d1dd 100644 > --- a/configs/beaglebone_defconfig > +++ b/configs/beaglebone_defconfig > @@ -1,31 +1,52 @@ > +# Architecture > BR2_arm=y > BR2_cortex_a8=y > +BR2_ARM_FPU_VFPV3=y > + > +# Patches > BR2_GLOBAL_PATCH_DIR="board/beaglebone/patches" > -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y > + > +# Linux headers same as kernel, a 5.10 series > +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y > + > +# System > +BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y > + > +# Image > BR2_ROOTFS_POST_BUILD_SCRIPT="board/beaglebone/post-build.sh" > BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" > BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/beaglebone/genimage.cfg" > + > +# Kernel > BR2_LINUX_KERNEL=y > BR2_LINUX_KERNEL_CUSTOM_TARBALL=y > -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,beagleboard,linux,4.19.79-ti-r30)/linux-4.19.79-ti-r30.tar.gz" > +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,beagleboard,linux,5.10.30-ti-r3)/linux-5.10.30-ti-r3.tar.gz" > BR2_LINUX_KERNEL_DEFCONFIG="omap2plus" > BR2_LINUX_KERNEL_DTS_SUPPORT=y > BR2_LINUX_KERNEL_INTREE_DTS_NAME="am335x-evm am335x-bone am335x-boneblack am335x-bonegreen am335x-evmsk am335x-boneblue" > BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y > + > +# Filesystem > BR2_TARGET_ROOTFS_EXT2=y > BR2_TARGET_ROOTFS_EXT2_4=y > + > +# Bootloader > BR2_TARGET_UBOOT=y > BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y > BR2_TARGET_UBOOT_CUSTOM_VERSION=y > -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.04" > +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.04" > BR2_TARGET_UBOOT_BOARD_DEFCONFIG="am335x_evm" > BR2_TARGET_UBOOT_NEEDS_DTC=y > # BR2_TARGET_UBOOT_FORMAT_BIN is not set > BR2_TARGET_UBOOT_FORMAT_IMG=y > BR2_TARGET_UBOOT_SPL=y > BR2_TARGET_UBOOT_SPL_NAME="MLO" > + > +# Required tools to create the SD image > BR2_PACKAGE_HOST_DOSFSTOOLS=y > BR2_PACKAGE_HOST_GENIMAGE=y > BR2_PACKAGE_HOST_MTOOLS=y > + > +# Supporting host tools to build FIT image > BR2_PACKAGE_HOST_UBOOT_TOOLS=y > BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SUPPORT=y > -- > 2.30.2 > > _______________________________________________ > buildroot mailing list > buildroot at busybox.net > http://lists.busybox.net/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'