From: Peter Seiderer <ps.report@gmx.net>
To: Julien Grossholtz <julien.grossholtz@openest.io>
Cc: Martin Bark <martin@barkynet.com>, buildroot@buildroot.org
Subject: Re: [Buildroot] [v2 PATCH 0/2] Raspberry-Pi Zero 2 W support
Date: Wed, 3 Nov 2021 21:06:03 +0100 [thread overview]
Message-ID: <20211103210603.3a135f02@gmx.net> (raw)
In-Reply-To: <20211030213600.3445223-1-julien.grossholtz@openest.io>
Hello Julien,
On Sat, 30 Oct 2021 23:35:58 +0200, Julien Grossholtz <julien.grossholtz@openest.io> wrote:
> Hello,
>
> Here is an update of my previous Raspberry-Pi Zero 2 W support.
> As Peter Seiderer pointed out, the Raspberry-Pi Linux Kernel was
> updated with a new bcm2710-rpi-zero-2.dtb [1] a few hours after I sent
> the patch.
Seems you are to fast, with commit [2] a 'bcm2710-rpi-zero-2-w.dtb' was
added (as a permanent replacement/name-change for bcm2710-rpi-zero-2.dtb)
...
>
> Therefore, I bumped the Raspberry-Pi Linux kernel to 5.10.76 for all related
> boards. I built and tested it for the Pis I have access to : Pi Zero W
> and Pi 4 (32 and 64 bit versions). But, I cannot test the other.
Would like to keep rpi-firmware up-to-date with the rpi-kernel (see
for example [3] and [4])...
Mind to re-spin your patchset?
Regards,
Peter
[2] https://github.com/raspberrypi/linux/commit/093bc6d7ffd3cfba05712a7208c8dbfdcffbbf47
[3] https://patchwork.ozlabs.org/project/buildroot/patch/20211006213728.1069-1-ps.report@gmx.net/
[4] https://patchwork.ozlabs.org/project/buildroot/patch/20211006213728.1069-2-ps.report@gmx.net/
>
> Regarding the Raspberry-Pi Zero 2 W, I updated the patch with the new
> dts and kernel git sha1. I booted it, everything seems to work: HDMI,
> Micro SD and Wi-Fi with some extra packages.
>
> Let me know what you think,
>
> Julien Grossholtz
>
>
> [1] https://github.com/raspberrypi/linux/commit/84dc624be6ae704fdb3c413b7d86315cf49fbb0b
>
>
> *** BLURB HERE ***
>
> Julien Grossholtz (2):
> configs/raspberrypi: bump kernel to 581049d (5.10.76)
> board/raspberrypi: add Raspberry Pi Zero 2 W
>
> board/raspberrypi/config_zero2w.txt | 29 +++++++++++++++
> .../genimage-raspberrypizero2w.cfg | 31 ++++++++++++++++
> board/raspberrypi/readme.txt | 5 +++
> board/raspberrypizero2w | 1 +
> configs/raspberrypi0_defconfig | 2 +-
> configs/raspberrypi0w_defconfig | 2 +-
> configs/raspberrypi2_defconfig | 2 +-
> configs/raspberrypi3_64_defconfig | 2 +-
> configs/raspberrypi3_defconfig | 2 +-
> configs/raspberrypi3_qt5we_defconfig | 2 +-
> configs/raspberrypi4_64_defconfig | 2 +-
> configs/raspberrypi4_defconfig | 2 +-
> configs/raspberrypi_defconfig | 2 +-
> configs/raspberrypicm4io_64_defconfig | 2 +-
> configs/raspberrypicm4io_defconfig | 2 +-
> configs/raspberrypizero2w_defconfig | 36 +++++++++++++++++++
> 16 files changed, 113 insertions(+), 11 deletions(-)
> create mode 100644 board/raspberrypi/config_zero2w.txt
> create mode 100644 board/raspberrypi/genimage-raspberrypizero2w.cfg
> create mode 120000 board/raspberrypizero2w
> create mode 100644 configs/raspberrypizero2w_defconfig
>
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
next prev parent reply other threads:[~2021-11-03 20:06 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-30 21:35 [Buildroot] [v2 PATCH 0/2] Raspberry-Pi Zero 2 W support Julien Grossholtz
2021-10-30 21:35 ` [Buildroot] [PATCH 1/2] configs/raspberrypi: bump kernel to 581049d (5.10.76) Julien Grossholtz
2021-11-03 22:39 ` Thomas Petazzoni
2021-10-30 21:36 ` [Buildroot] [PATCH 2/2] board/raspberrypi: add Raspberry Pi Zero 2 W Julien Grossholtz
2021-11-03 20:06 ` Peter Seiderer [this message]
2021-11-04 14:21 ` [Buildroot] [v2 PATCH 0/2] Raspberry-Pi Zero 2 W support Julien Grossholtz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211103210603.3a135f02@gmx.net \
--to=ps.report@gmx.net \
--cc=buildroot@buildroot.org \
--cc=julien.grossholtz@openest.io \
--cc=martin@barkynet.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox