Buildroot Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Yann E. MORIN" <yann.morin.1998@free.fr>
To: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Cc: Romain Naour <romain.naour@gmail.com>,
	Giulio Benetti <giulio.benetti@benettiengineering.com>,
	buildroot@buildroot.org
Subject: Re: [Buildroot] [PATCH 1/1] package/binutils: zlib is mandatory
Date: Wed, 10 Nov 2021 21:46:12 +0100	[thread overview]
Message-ID: <20211110204612.GO2084998@scaer> (raw)
In-Reply-To: <20211110174609.1927002-1-fontaine.fabrice@gmail.com>

Fabrice, All,

On 2021-11-10 18:46 +0100, Fabrice Fontaine spake thusly:
> As found out by Yann [1], if zlib is not provided by the system,
> binutils will use a bundled version.

This is not exactly true: indeed, even when zlib is provided by the
system, binutils *will* use its bundled copy, *unless* explicitly told
not to.

> So use --with-system-zlib which is
> available since version 2.21 and
> https://github.com/bminor/binutils-gdb/commit/700d40ca16eb3ba1ecc1e602cb3eec175bdf70f0
> 
> This will fix the following build failure with oprofile:

... in a static configuration without zlib enabled.

I've extended the commit log with those two refinements, and applied to
master, thanks.

Regards,
Yann E. MORIN.

> checking for bfd_openr in -lbfd... no
> checking for compress in -lz... no
> configure: error: libz library not found; required by libbfd
> 
> As found out by Arnout [1], this fails infrequently because static is
> already pretty rare, but in addition zlib is almost always selected by
> some other package.
> 
> Fixes:
>  - http://autobuild.buildroot.org/results/0e1d16dfbb455a08db80ac5d35613908c3b4163f
> 
> [1] https://patchwork.ozlabs.org/project/buildroot/patch/20211030214734.2154583-1-fontaine.fabrice@gmail.com/
> 
> Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
> ---
>  package/binutils/Config.in   | 1 +
>  package/binutils/binutils.mk | 7 ++-----
>  2 files changed, 3 insertions(+), 5 deletions(-)
> 
> diff --git a/package/binutils/Config.in b/package/binutils/Config.in
> index e17a8ec65a..5e1a769998 100644
> --- a/package/binutils/Config.in
> +++ b/package/binutils/Config.in
> @@ -2,6 +2,7 @@ config BR2_PACKAGE_BINUTILS
>  	bool "binutils"
>  	depends on !BR2_nios2
>  	depends on BR2_USE_WCHAR
> +	select BR2_PACKAGE_ZLIB
>  	help
>  	  Install binutils on the target
>  
> diff --git a/package/binutils/binutils.mk b/package/binutils/binutils.mk
> index bfad25422d..13f61be035 100644
> --- a/package/binutils/binutils.mk
> +++ b/package/binutils/binutils.mk
> @@ -25,7 +25,7 @@ BINUTILS_SITE ?= $(BR2_GNU_MIRROR)/binutils
>  BINUTILS_SOURCE ?= binutils-$(BINUTILS_VERSION).tar.xz
>  BINUTILS_EXTRA_CONFIG_OPTIONS = $(call qstrip,$(BR2_BINUTILS_EXTRA_CONFIG_OPTIONS))
>  BINUTILS_INSTALL_STAGING = YES
> -BINUTILS_DEPENDENCIES = $(TARGET_NLS_DEPENDENCIES)
> +BINUTILS_DEPENDENCIES = zlib $(TARGET_NLS_DEPENDENCIES)
>  BINUTILS_MAKE_OPTS = LIBS=$(TARGET_NLS_LIBS)
>  BINUTILS_LICENSE = GPL-3.0+, libiberty LGPL-2.1+
>  BINUTILS_LICENSE_FILES = COPYING3 COPYING.LIB
> @@ -51,6 +51,7 @@ BINUTILS_CONF_OPTS = \
>  	--target=$(GNU_TARGET_NAME) \
>  	--enable-install-libiberty \
>  	--enable-build-warnings=no \
> +	--with-system-zlib \
>  	$(BINUTILS_DISABLE_GDB_CONF_OPTS) \
>  	$(BINUTILS_EXTRA_CONFIG_OPTIONS)
>  
> @@ -74,10 +75,6 @@ ifeq ($(BR2_ARM_CPU_ARMV7M)$(BR2_OPTIMIZE_S),yy)
>  BINUTILS_CONF_ENV += CFLAGS="$(TARGET_CFLAGS) -O2"
>  endif
>  
> -ifeq ($(BR2_PACKAGE_ZLIB),y)
> -BINUTILS_DEPENDENCIES += zlib
> -endif
> -
>  # "host" binutils should actually be "cross"
>  # We just keep the convention of "host utility" for now
>  HOST_BINUTILS_CONF_OPTS = \
> -- 
> 2.33.0
> 
> _______________________________________________
> buildroot mailing list
> buildroot@buildroot.org
> https://lists.buildroot.org/mailman/listinfo/buildroot

-- 
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

  reply	other threads:[~2021-11-10 20:46 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-10 17:46 [Buildroot] [PATCH 1/1] package/binutils: zlib is mandatory Fabrice Fontaine
2021-11-10 20:46 ` Yann E. MORIN [this message]
2021-11-17 15:39 ` Peter Korsgaard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211110204612.GO2084998@scaer \
    --to=yann.morin.1998@free.fr \
    --cc=buildroot@buildroot.org \
    --cc=fontaine.fabrice@gmail.com \
    --cc=giulio.benetti@benettiengineering.com \
    --cc=romain.naour@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox