From: "Yann E. MORIN" <yann.morin.1998@free.fr>
To: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>,
Buildroot List <buildroot@buildroot.org>
Subject: Re: [Buildroot] [PATCH 0/8] genimage.cfg file clean-up
Date: Sat, 23 Jul 2022 15:37:20 +0200 [thread overview]
Message-ID: <20220723133720.GA2641@scaer> (raw)
In-Reply-To: <20220722202151.76235-1-thomas.petazzoni@bootlin.com>
Thomas, Giulio, All,
On 2022-07-22 22:21 +0200, Thomas Petazzoni via buildroot spake thusly:
> This small series is a revamp of Giulio's series cleaning up
> genimage.cfg. This new version is the result of some discussion
> between Arnout and me to find a middle-ground situation.
Applied to master, Thanks!
I'll further reply to patch 3 with a very minor comment.
Regards,
Yann E. MORIN.
> So what we propose is to:
>
> - Use the U and F specifiers provided by genimage for the EFI System
> Partition and FAT32 partitions respectively.
>
> - Use the L specifier (explicitly specified in genimage.cfg, even
> though it is the default), for the root filesystem or other Linux
> filesystems. This means we would not comply with the
> systemd-specific Discoverable Partitions Specification
> (https://systemd.io/DISCOVERABLE_PARTITIONS/), but we don't see the
> point of this specification (which requires identifying root
> filesystems for different architecture by different GUID) in the
> context of Buildroot. However, while we recommend using L for all
> new genimage.cfg, we do not change existing genimage.cfg, to not
> break them.
>
> In this series, none of the patches except the last make any
> functional change. The last patch does introduce some functional
> change: some partitions were identified as EFI System Partition even
> though they are not: the last commit converts them to use the "F"
> type, used for FAT filesystems.
>
> Best regards,
>
> Thomas Petazzoni
>
> Thomas Petazzoni (8):
> board/orangepi/common/genimage.cfg: use quotes around "gpt"
> board/*/genimage.cfg: use partition-table-type = "gpt"
> docs/manual: update documentation about partition-type-uuid convention
> in genimage.cfg
> board/orangepi/orangepi-r1/genimage.cfg: remove double quotes around
> partition-type-uuid values
> board/orangepi/orangepi-r1/genimage.cfg: use correct partition type
> board/*/genimage.cfg: use partition-type-uuid U where relevant
> board/sifive/hifive-unleashed/genimage*: convert partition-type-uuid
> values to lower-case
> board/*/genimage.cfg: use partition-type-uuid = F for some FAT
> partitions
>
> board/aarch64-efi/genimage-efi.cfg | 2 +-
> board/friendlyarm/nanopc-t4/genimage.cfg | 2 +-
> board/friendlyarm/nanopi-m4/genimage.cfg | 2 +-
> board/octavo/osd32mp1-brk/genimage.cfg | 2 +-
> board/octavo/osd32mp1-red/genimage.cfg | 2 +-
> board/olimex/stmp1_olinuxino/genimage.cfg | 2 +-
> board/orangepi/common/genimage.cfg | 2 +-
> board/orangepi/orangepi-r1/genimage.cfg | 4 ++--
> board/pc/genimage-efi.cfg | 2 +-
> board/pine64/rockpro64/genimage.cfg | 2 +-
> board/qemu/aarch64-sbsa/genimage.cfg | 2 +-
> board/radxa/rockpi-4/genimage.cfg | 2 +-
> board/radxa/rockpi-n10/genimage.cfg | 2 +-
> board/radxa/rockpi-n8/genimage.cfg | 2 +-
> board/seeed/stm32mp157c-odyssey/genimage.cfg | 2 +-
> board/sifive/hifive-unleashed/genimage_sdcard.cfg | 6 +++---
> board/sifive/hifive-unleashed/genimage_spi-nor.cfg | 4 ++--
> .../common/stm32mp157/genimage.cfg.template | 2 +-
> docs/manual/writing-rules.txt | 12 ++++++++++++
> 19 files changed, 34 insertions(+), 22 deletions(-)
>
> --
> 2.37.1
>
> _______________________________________________
> buildroot mailing list
> buildroot@buildroot.org
> https://lists.buildroot.org/mailman/listinfo/buildroot
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
prev parent reply other threads:[~2022-07-23 13:38 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-22 20:21 [Buildroot] [PATCH 0/8] genimage.cfg file clean-up Thomas Petazzoni via buildroot
2022-07-22 20:21 ` [Buildroot] [PATCH 1/8] board/orangepi/common/genimage.cfg: use quotes around "gpt" Thomas Petazzoni via buildroot
2022-07-22 20:21 ` [Buildroot] [PATCH 2/8] board/*/genimage.cfg: use partition-table-type = "gpt" Thomas Petazzoni via buildroot
2022-07-22 20:21 ` [Buildroot] [PATCH 3/8] docs/manual: update documentation about partition-type-uuid convention in genimage.cfg Thomas Petazzoni via buildroot
2022-07-23 13:38 ` Yann E. MORIN
2022-07-22 20:21 ` [Buildroot] [PATCH 4/8] board/orangepi/orangepi-r1/genimage.cfg: remove double quotes around partition-type-uuid values Thomas Petazzoni via buildroot
2022-07-22 20:21 ` [Buildroot] [PATCH 5/8] board/orangepi/orangepi-r1/genimage.cfg: use correct partition type Thomas Petazzoni via buildroot
2022-07-22 20:21 ` [Buildroot] [PATCH 6/8] board/*/genimage.cfg: use partition-type-uuid U where relevant Thomas Petazzoni via buildroot
2022-07-22 20:21 ` [Buildroot] [PATCH 7/8] board/sifive/hifive-unleashed/genimage*: convert partition-type-uuid values to lower-case Thomas Petazzoni via buildroot
2022-07-22 20:21 ` [Buildroot] [PATCH 8/8] board/*/genimage.cfg: use partition-type-uuid = F for some FAT partitions Thomas Petazzoni via buildroot
2022-07-23 13:37 ` Yann E. MORIN [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220723133720.GA2641@scaer \
--to=yann.morin.1998@free.fr \
--cc=buildroot@buildroot.org \
--cc=giulio.benetti@benettiengineering.com \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox