From: "Yann E. MORIN" <yann.morin.1998@free.fr>
To: Bernd Kuhls <bernd.kuhls@t-online.de>
Cc: Pierre-Jean Texier <texier.pj2@gmail.com>, buildroot@buildroot.org
Subject: Re: [Buildroot] [PATCH v2 1/1] package/libarchive: Only add "iconv" to the .pc file if needed
Date: Sat, 4 Feb 2023 15:55:14 +0100 [thread overview]
Message-ID: <20230204145514.GD24755@scaer> (raw)
In-Reply-To: <20230201181005.731564-1-bernd.kuhls@t-online.de>
Bernd, All,
On 2023-02-01 19:10 +0100, Bernd Kuhls spake thusly:
> Fix the following build failure with fwup raised since bump to version
> 3.6.2 in commit 380341b249175382691f268de4b41d3843ff0acc and
> https://github.com/libarchive/libarchive/commit/a83f3d327aefe8d628230f326621b014d82f55b4
>
> checking for pkg-config... /tmp/instance-19/output-1/host/bin/pkg-config
> checking pkg-config is at least version 0.9.0... yes
> checking for ARCHIVE... no
> configure: error: Requires libarchive. Libarchive must be built with zlib support.
>
> Fixes:
> http://autobuild.buildroot.net/results/f5d/f5d549fb4f08156ba5952ce75926f7fd2242bfdf/
>
> Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Applied to master, thanks.
Regards,
Yann E. MORIN.
> ---
> v2: added dependency to host-pkgconf to fix autoconf error
>
> ...y-add-iconv-to-the-pc-file-if-needed.patch | 44 +++++++++++++++++++
> package/libarchive/libarchive.mk | 4 ++
> 2 files changed, 48 insertions(+)
> create mode 100644 package/libarchive/0001-Only-add-iconv-to-the-pc-file-if-needed.patch
>
> diff --git a/package/libarchive/0001-Only-add-iconv-to-the-pc-file-if-needed.patch b/package/libarchive/0001-Only-add-iconv-to-the-pc-file-if-needed.patch
> new file mode 100644
> index 0000000000..c93944f789
> --- /dev/null
> +++ b/package/libarchive/0001-Only-add-iconv-to-the-pc-file-if-needed.patch
> @@ -0,0 +1,44 @@
> +From 1f35c466aaa9444335a1b854b0b7223b0d2346c2 Mon Sep 17 00:00:00 2001
> +From: Peter Pentchev <roam@ringlet.net>
> +Date: Thu, 29 Dec 2022 00:04:40 +0200
> +Subject: [PATCH] Only add "iconv" to the .pc file if needed (#1825)
> +
> +Hi,
> +
> +Thanks for writing and maintaining libarchive!
> +
> +What do you think about this trivial change that does not add "iconv" to
> +the pkg-config file's list of required packages unless it is actually
> +needed? On at least Debian GNU/Linux systems, the iconv(3) function is
> +part of the system C library and there is no Debian package that
> +installs an iconv.pc file, so I had to make this change to the Debian
> +package of libarchive.
> +
> +Thanks again, and keep up the great work!
> +
> +G'luck,
> +Peter
> +
> +Downloaded from upstream commit:
> +https://github.com/libarchive/libarchive/commit/1f35c466aaa9444335a1b854b0b7223b0d2346c2
> +
> +Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
> +---
> + configure.ac | 4 +++-
> + 1 file changed, 3 insertions(+), 1 deletion(-)
> +
> +diff --git a/configure.ac b/configure.ac
> +index 99bff20d1..e2715cfde 100644
> +--- a/configure.ac
> ++++ b/configure.ac
> +@@ -378,7 +378,9 @@ if test "x$with_iconv" != "xno"; then
> + AC_CHECK_HEADERS([localcharset.h])
> + am_save_LIBS="$LIBS"
> + LIBS="${LIBS} ${LIBICONV}"
> +- LIBSREQUIRED="$LIBSREQUIRED${LIBSREQUIRED:+ }iconv"
> ++ if test -n "$LIBICONV"; then
> ++ LIBSREQUIRED="$LIBSREQUIRED${LIBSREQUIRED:+ }iconv"
> ++ fi
> + AC_CHECK_FUNCS([locale_charset])
> + LIBS="${am_save_LIBS}"
> + if test "x$ac_cv_func_locale_charset" != "xyes"; then
> diff --git a/package/libarchive/libarchive.mk b/package/libarchive/libarchive.mk
> index cfc148d01d..cd7c13fbed 100644
> --- a/package/libarchive/libarchive.mk
> +++ b/package/libarchive/libarchive.mk
> @@ -11,6 +11,10 @@ LIBARCHIVE_INSTALL_STAGING = YES
> LIBARCHIVE_LICENSE = BSD-2-Clause, BSD-3-Clause, CC0-1.0, OpenSSL, Apache-2.0
> LIBARCHIVE_LICENSE_FILES = COPYING
> LIBARCHIVE_CPE_ID_VENDOR = libarchive
> +# We're patching configure.ac
> +LIBARCHIVE_AUTORECONF = YES
> +# needed for autoreconf
> +LIBARCHIVE_DEPENDENCIES += host-pkgconf
>
> ifeq ($(BR2_PACKAGE_LIBARCHIVE_BSDTAR),y)
> ifeq ($(BR2_STATIC_LIBS),y)
> --
> 2.39.1
>
> _______________________________________________
> buildroot mailing list
> buildroot@buildroot.org
> https://lists.buildroot.org/mailman/listinfo/buildroot
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
prev parent reply other threads:[~2023-02-04 14:55 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-01 18:10 [Buildroot] [PATCH v2 1/1] package/libarchive: Only add "iconv" to the .pc file if needed Bernd Kuhls
2023-02-02 20:46 ` Peter Seiderer
2023-02-04 14:55 ` Yann E. MORIN [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230204145514.GD24755@scaer \
--to=yann.morin.1998@free.fr \
--cc=bernd.kuhls@t-online.de \
--cc=buildroot@buildroot.org \
--cc=texier.pj2@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox