From: Thomas Petazzoni via buildroot <buildroot@buildroot.org>
To: Andreas Dannenberg via buildroot <buildroot@buildroot.org>
Cc: Andreas Dannenberg <dannenberg@ti.com>
Subject: Re: [Buildroot] [PATCH v9 00/11] add support for TI's AM64x and AM62x boards
Date: Tue, 22 Aug 2023 12:14:07 +0200 [thread overview]
Message-ID: <20230822121407.414eb140@windsurf> (raw)
In-Reply-To: <20230622160212.2063472-1-dannenberg@ti.com>
Hello Andreas,
On Thu, 22 Jun 2023 11:02:01 -0500
Andreas Dannenberg via buildroot <buildroot@buildroot.org> wrote:
> Andreas Dannenberg (8):
> boot/ti-k3-r5-loader: allow for full build source customization
> boot/uboot: add support for building the TI K3 DM into U-Boot
> board/ti/am62x_sk|am64x_sk: switch to TI SDK v8.6 sources
> package/ti-core-secdev-k3: new package
> board/ti/am62x_sk|am64x_sk: switch to HS-FS device variants
> package/ti-rogue-km: new package
> package/ti-rogue-um: new package
> configs/am62x_sk_defconfig: enable IMG Rogue graphics driver
>
> Xuanhao Shi (3):
> boot/ti-k3-image-gen: new package
> board/ti/am64x_sk: add new board
> board/ti/am62x_sk: add new board
So, I have just merged the first 5 patches of this series... but
actually in its v8 iteration because the v8 is the one that was still
pending in patchwork, and I realize only now that there was a v9. How
well, too late, I already pushed to our next branch, so any additional
change will have to be done on top of what's in the next branch.
I'll therefore reply to the v8 patches that I have merged and explain
the numerous changes I did.
Best regards,
Thomas
--
Thomas Petazzoni, co-owner and CEO, Bootlin
Embedded Linux and Kernel engineering and training
https://bootlin.com
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
next prev parent reply other threads:[~2023-08-22 10:14 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-22 16:02 [Buildroot] [PATCH v9 00/11] add support for TI's AM64x and AM62x boards Andreas Dannenberg via buildroot
2023-06-22 16:02 ` [Buildroot] [PATCH v9 01/11] boot/ti-k3-r5-loader: allow for full build source customization Andreas Dannenberg via buildroot
2023-06-24 21:23 ` Yann E. MORIN
2023-06-25 13:21 ` Arnout Vandecappelle via buildroot
2023-06-25 13:35 ` Yann E. MORIN
2023-06-26 19:44 ` Julien Olivain
2023-06-26 19:53 ` Julien Olivain
2023-06-22 16:02 ` [Buildroot] [PATCH v9 02/11] boot/ti-k3-image-gen: new package Andreas Dannenberg via buildroot
2023-06-24 22:28 ` Yann E. MORIN
2023-08-08 23:38 ` Bryce Johnson
2023-08-15 7:15 ` Andreas Dannenberg via buildroot
2023-08-15 22:54 ` Bryce Johnson
2023-06-22 16:02 ` [Buildroot] [PATCH v9 03/11] boot/uboot: add support for building the TI K3 DM into U-Boot Andreas Dannenberg via buildroot
2023-06-25 7:02 ` Yann E. MORIN
2023-06-25 7:08 ` Yann E. MORIN
2023-06-22 16:02 ` [Buildroot] [PATCH v9 04/11] board/ti/am64x_sk: add new board Andreas Dannenberg via buildroot
2023-06-25 5:41 ` François Perrad
2023-06-25 13:43 ` Yann E. MORIN
2023-06-22 16:02 ` [Buildroot] [PATCH v9 05/11] board/ti/am62x_sk: " Andreas Dannenberg via buildroot
2023-06-25 5:42 ` François Perrad
2023-08-15 7:21 ` Andreas Dannenberg via buildroot
2023-06-22 16:02 ` [Buildroot] [PATCH v9 06/11] board/ti/am62x_sk|am64x_sk: switch to TI SDK v8.6 sources Andreas Dannenberg via buildroot
2023-06-25 13:54 ` Yann E. MORIN
2023-06-25 14:33 ` Arnout Vandecappelle via buildroot
2023-06-25 15:22 ` Peter Korsgaard
2023-06-25 18:59 ` Arnout Vandecappelle via buildroot
2023-06-25 19:14 ` Peter Korsgaard
2023-06-25 19:36 ` Yann E. MORIN
2023-06-22 16:02 ` [Buildroot] [PATCH v9 07/11] package/ti-core-secdev-k3: new package Andreas Dannenberg via buildroot
2023-06-23 3:48 ` Patrick Oppenlander
2023-06-23 14:53 ` Andreas Dannenberg via buildroot
2023-06-24 0:32 ` Patrick Oppenlander
2023-06-24 1:11 ` Andreas Dannenberg via buildroot
2023-06-24 4:09 ` Patrick Oppenlander
2023-06-25 7:55 ` Yann E. MORIN
2023-06-25 13:26 ` Arnout Vandecappelle via buildroot
2023-06-22 16:02 ` [Buildroot] [PATCH v9 08/11] board/ti/am62x_sk|am64x_sk: switch to HS-FS device variants Andreas Dannenberg via buildroot
2023-06-22 16:02 ` [Buildroot] [PATCH v9 09/11] package/ti-rogue-km: new package Andreas Dannenberg via buildroot
2023-06-25 8:59 ` Yann E. MORIN
2023-08-18 17:30 ` Bryce Johnson
2023-06-22 16:02 ` [Buildroot] [PATCH v9 10/11] package/ti-rogue-um: " Andreas Dannenberg via buildroot
2023-06-23 7:30 ` François Perrad
2023-06-23 14:59 ` Andreas Dannenberg via buildroot
2023-06-25 5:37 ` François Perrad
2023-06-25 10:15 ` Yann E. MORIN
2023-06-27 2:02 ` Andreas Dannenberg via buildroot
2023-08-22 15:15 ` Thomas Petazzoni via buildroot
2023-06-27 22:48 ` Andreas Dannenberg via buildroot
2023-08-22 10:40 ` Thomas Petazzoni via buildroot
2023-06-22 16:02 ` [Buildroot] [PATCH v9 11/11] configs/am62x_sk_defconfig: enable IMG Rogue graphics driver Andreas Dannenberg via buildroot
2023-06-23 4:02 ` [Buildroot] [PATCH v9 00/11] add support for TI's AM64x and AM62x boards Patrick Oppenlander
2023-06-23 15:04 ` Andreas Dannenberg via buildroot
2023-08-22 10:14 ` Thomas Petazzoni via buildroot [this message]
2023-08-22 18:05 ` Thomas Petazzoni via buildroot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230822121407.414eb140@windsurf \
--to=buildroot@buildroot.org \
--cc=dannenberg@ti.com \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox