From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from smtp1.osuosl.org (smtp1.osuosl.org [140.211.166.138]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 2E76BC4332F for ; Wed, 1 Nov 2023 01:31:48 +0000 (UTC) Received: from localhost (localhost [127.0.0.1]) by smtp1.osuosl.org (Postfix) with ESMTP id A47ED8415C; Wed, 1 Nov 2023 01:31:47 +0000 (UTC) DKIM-Filter: OpenDKIM Filter v2.11.0 smtp1.osuosl.org A47ED8415C X-Virus-Scanned: amavisd-new at osuosl.org Received: from smtp1.osuosl.org ([127.0.0.1]) by localhost (smtp1.osuosl.org [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 94wlKovF0KiZ; Wed, 1 Nov 2023 01:31:44 +0000 (UTC) Received: from ash.osuosl.org (ash.osuosl.org [140.211.166.34]) by smtp1.osuosl.org (Postfix) with ESMTP id 0DE17840BA; Wed, 1 Nov 2023 01:31:43 +0000 (UTC) DKIM-Filter: OpenDKIM Filter v2.11.0 smtp1.osuosl.org 0DE17840BA Received: from smtp1.osuosl.org (smtp1.osuosl.org [140.211.166.138]) by ash.osuosl.org (Postfix) with ESMTP id 080F01BF976 for ; Wed, 1 Nov 2023 01:31:42 +0000 (UTC) Received: from localhost (localhost [127.0.0.1]) by smtp1.osuosl.org (Postfix) with ESMTP id D5515840BA for ; Wed, 1 Nov 2023 01:31:41 +0000 (UTC) DKIM-Filter: OpenDKIM Filter v2.11.0 smtp1.osuosl.org D5515840BA X-Virus-Scanned: amavisd-new at osuosl.org Received: from smtp1.osuosl.org ([127.0.0.1]) by localhost (smtp1.osuosl.org [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id r8uMlqrlxSGk for ; Wed, 1 Nov 2023 01:31:36 +0000 (UTC) Received: from mail-pl1-x634.google.com (mail-pl1-x634.google.com [IPv6:2607:f8b0:4864:20::634]) by smtp1.osuosl.org (Postfix) with ESMTPS id C14DD840B4 for ; Wed, 1 Nov 2023 01:31:36 +0000 (UTC) DKIM-Filter: OpenDKIM Filter v2.11.0 smtp1.osuosl.org C14DD840B4 Received: by mail-pl1-x634.google.com with SMTP id d9443c01a7336-1cc131e52f1so3102445ad.0 for ; Tue, 31 Oct 2023 18:31:36 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1698802295; x=1699407095; h=content-transfer-encoding:mime-version:message-id:date:subject:cc :to:from:x-gm-message-state:from:to:cc:subject:date:message-id :reply-to; bh=QAQk4qQDtOjG+D1P6oL37DA9x7CzPUe52+qLN2dkPAo=; b=UUy+c0sHZiz6M5SUmwiRBJVVg/2PsAOX9mpBXoBBRwJ73YpY0K2722J+7N6nUu1tT/ cPgku4+2wvWZu7L17wtpGCRGlEqXbg8+aFZavG12UmFQy+xlapys0R0HgOMs1C4yh/hv lT3SsaBcFVVGs+ZYzkqabgEVkGM1/h3D2uTs1zXsCxtQldw6D7BT/yi+X7FNWQJ/RrDK 0WB7fgj7il2nxtcN+66e9u1yPF30/iXCYQYjjZ3EPhu/vx4uVQ0xBaI5wTov9nea+jbc YNwPd0esrCYLkKsHzAsQ9m8z8o+ZcOfQfYA1LbW+uw6CCHMxaxIPTSX/pWqIVwtK8Oi1 NjIQ== X-Gm-Message-State: AOJu0YwyiFe3y1GFvoo48Hk8XLtBhNZETQROVxVgw3iEYYmT6czTmpv+ 9Pr8+zYJydrPvXJgNeeWIZtJfm577b8= X-Google-Smtp-Source: AGHT+IET+mkkFgunJljUFcW29K32/lo7gv0QJuh7FvR881Y5jcdsN96eYFsR66/2iSqIRe+AAzSyow== X-Received: by 2002:a17:90b:1e0d:b0:27d:d9a:be8b with SMTP id pg13-20020a17090b1e0d00b0027d0d9abe8bmr5850236pjb.6.1698802295157; Tue, 31 Oct 2023 18:31:35 -0700 (PDT) Received: from localhost ([142.171.12.18]) by smtp.gmail.com with ESMTPSA id on15-20020a17090b1d0f00b0026f39c90111sm1659427pjb.20.2023.10.31.18.31.34 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 31 Oct 2023 18:31:34 -0700 (PDT) From: Scott Fan To: buildroot@buildroot.org Date: Wed, 1 Nov 2023 09:31:27 +0800 Message-Id: <20231101013128.13305-1-fancp2007@gmail.com> X-Mailer: git-send-email 2.25.1 MIME-Version: 1.0 X-Mailman-Original-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20230601; t=1698802295; x=1699407095; darn=buildroot.org; h=content-transfer-encoding:mime-version:message-id:date:subject:cc :to:from:from:to:cc:subject:date:message-id:reply-to; bh=QAQk4qQDtOjG+D1P6oL37DA9x7CzPUe52+qLN2dkPAo=; b=SK7mBLNIpwIftgBqrqiVIasxsf6vzfBmIFjPRZh8ke8fBOmhvjqtBwBSfQMARegIZg ZL41C5rNJ1uUIqOO8VoWbQXC3c94vHjgjRZ1MiCF7FQ20EtGGkS8q3Qq+l4rtwTrtKh4 Ym63V9nJxAR3wsIh5bbZbGYs0dI/ebuhedlNPERneysUW3dmi4/Igknt9T0GRw6TjRpa eJgMYBjPAL5UvqomiJjW8aOmbXXookRSjtDi7eHg/p+31YoyjYOvrAFktN81MsKLMs4n 5OvtEJIz5YLLSxFZTEDYVQfFVjqajBDDwwE0YTzbGh4V32EdJNl/1zCAy2jFYtxlz2Ks 9TGw== X-Mailman-Original-Authentication-Results: smtp1.osuosl.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.a=rsa-sha256 header.s=20230601 header.b=SK7mBLNI Subject: [Buildroot] [PATCH] configs/friendlyarm_nanopi_neo2_defconfig: new board X-BeenThere: buildroot@buildroot.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Discussion and development of buildroot List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Scott Fan Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Errors-To: buildroot-bounces@buildroot.org Sender: "buildroot" Add support for the FriendlyARM NanoPi NEO2 with mainline components: - U-Boot 2023.10 - Linux 6.1.60 Board's wiki page: - https://wiki.friendlyelec.com/wiki/index.php/NanoPi_NEO2 Signed-off-by: Scott Fan --- Changes v1 -> v2: - Fix issues from 'utils/docker-run make check-package' - Add atf custom version in the defconfig - No need for sudo to run sync --- board/friendlyarm/nanopi-neo2/extlinux.conf | 4 ++ board/friendlyarm/nanopi-neo2/genimage.cfg | 40 ++++++++++++ board/friendlyarm/nanopi-neo2/post-build.sh | 8 +++ board/friendlyarm/nanopi-neo2/readme.txt | 34 ++++++++++ ...fitImage-source-file-for-NanoPi-NEO2.patch | 62 +++++++++++++++++++ .../nanopi-neo2/uboot/fit_spl.fragment | 1 + configs/friendlyarm_nanopi_neo2_defconfig | 50 +++++++++++++++ 7 files changed, 199 insertions(+) create mode 100644 board/friendlyarm/nanopi-neo2/extlinux.conf create mode 100644 board/friendlyarm/nanopi-neo2/genimage.cfg create mode 100755 board/friendlyarm/nanopi-neo2/post-build.sh create mode 100644 board/friendlyarm/nanopi-neo2/readme.txt create mode 100644 board/friendlyarm/nanopi-neo2/uboot/0001-ARM-Add-default-fitImage-source-file-for-NanoPi-NEO2.patch create mode 100644 board/friendlyarm/nanopi-neo2/uboot/fit_spl.fragment create mode 100644 configs/friendlyarm_nanopi_neo2_defconfig diff --git a/board/friendlyarm/nanopi-neo2/extlinux.conf b/board/friendlyarm/nanopi-neo2/extlinux.conf new file mode 100644 index 0000000000..04aea276a2 --- /dev/null +++ b/board/friendlyarm/nanopi-neo2/extlinux.conf @@ -0,0 +1,4 @@ +label friendlyarm-nanopi-buildroot + kernel /Image + devicetree /sun50i-h5-nanopi-neo2.dtb + append console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait diff --git a/board/friendlyarm/nanopi-neo2/genimage.cfg b/board/friendlyarm/nanopi-neo2/genimage.cfg new file mode 100644 index 0000000000..54465ca7fe --- /dev/null +++ b/board/friendlyarm/nanopi-neo2/genimage.cfg @@ -0,0 +1,40 @@ +image boot.vfat { + vfat { + files = { + "Image", + "sun50i-h5-nanopi-neo2.dtb", + "extlinux" + } + } + + size = 64M +} + +image sdcard.img { + hdimage { + } + + partition spl { + in-partition-table = "no" + image = "sunxi-spl.bin" + offset = 8K + } + + partition u-boot { + in-partition-table = "no" + image = "u-boot.itb" + offset = 40K + size = 1M # 1MB - 40KB + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +} diff --git a/board/friendlyarm/nanopi-neo2/post-build.sh b/board/friendlyarm/nanopi-neo2/post-build.sh new file mode 100755 index 0000000000..9cb196ac8d --- /dev/null +++ b/board/friendlyarm/nanopi-neo2/post-build.sh @@ -0,0 +1,8 @@ +#!/bin/sh + +BOARD_DIR="$(dirname "$0")" + +# Parse BINARIES_DIR variable from arguments while missing in environment variable +[ -n "${BINARIES_DIR}" ] || BINARIES_DIR="$1" + +install -m 0644 -D "${BOARD_DIR}/extlinux.conf" "${BINARIES_DIR}/extlinux/extlinux.conf" diff --git a/board/friendlyarm/nanopi-neo2/readme.txt b/board/friendlyarm/nanopi-neo2/readme.txt new file mode 100644 index 0000000000..607547442a --- /dev/null +++ b/board/friendlyarm/nanopi-neo2/readme.txt @@ -0,0 +1,34 @@ +Intro +===== + +This default configuration will allow you to start experimenting with the +buildroot environment for the Nanopi NEO2. With the current configuration +it will bring-up the board, and allow access through the serial console. + +Wiki link: +https://wiki.friendlyelec.com/wiki/index.php/NanoPi_NEO2 + +This configuration uses U-Boot mainline and kernel mainline. + +How to build +============ + + $ make friendlyarm_nanopi_neo2_defconfig + $ make + +Note: you will need access to the internet to download the required +sources. + +How to write the SD card +======================== + +Once the build process is finished you will have an image called "sdcard.img" +in the output/images/ directory. + +Copy the bootable "sdcard.img" onto an SD card with "dd": + + $ sudo dd if=output/images/sdcard.img of=/dev/sdX + $ sync + +Insert the micro SDcard in your Nanopi NEO2 and power it up. The console +is on the serial line, 115200 8N1. diff --git a/board/friendlyarm/nanopi-neo2/uboot/0001-ARM-Add-default-fitImage-source-file-for-NanoPi-NEO2.patch b/board/friendlyarm/nanopi-neo2/uboot/0001-ARM-Add-default-fitImage-source-file-for-NanoPi-NEO2.patch new file mode 100644 index 0000000000..c4396c506a --- /dev/null +++ b/board/friendlyarm/nanopi-neo2/uboot/0001-ARM-Add-default-fitImage-source-file-for-NanoPi-NEO2.patch @@ -0,0 +1,62 @@ +From a58df11b8676009ef951de3cfba0e1495f1cd551 Mon Sep 17 00:00:00 2001 +From: Scott Fan +Date: Wed, 1 Nov 2023 09:03:44 +0800 +Subject: [PATCH] ARM: Add default fitImage source file for NanoPi NEO2 board + +Signed-off-by: Scott Fan +--- + board/friendlyarm/nanopi-neo2/fit_spl_atf.its | 42 +++++++++++++++++++ + 1 file changed, 42 insertions(+) + create mode 100644 board/friendlyarm/nanopi-neo2/fit_spl_atf.its + +diff --git a/board/friendlyarm/nanopi-neo2/fit_spl_atf.its b/board/friendlyarm/nanopi-neo2/fit_spl_atf.its +new file mode 100644 +index 0000000000..18b5d0d681 +--- /dev/null ++++ b/board/friendlyarm/nanopi-neo2/fit_spl_atf.its +@@ -0,0 +1,42 @@ ++/dts-v1/; ++ ++/ { ++ description = "Configuration to load ATF before U-Boot"; ++ #address-cells = <1>; ++ ++ images { ++ uboot { ++ description = "U-Boot (64-bit)"; ++ data = /incbin/("u-boot-nodtb.bin"); ++ type = "standalone"; ++ arch = "arm64"; ++ compression = "none"; ++ load = <0x4a000000>; ++ }; ++ atf { ++ description = "ARM Trusted Firmware"; ++ data = /incbin/("bl31.bin"); ++ type = "firmware"; ++ arch = "arm64"; ++ compression = "none"; ++ load = <0x44000>; ++ entry = <0x44000>; ++ }; ++ fdt_1 { ++ description = "sun50i-h5-nanopi-neo2"; ++ data = /incbin/("arch/arm/dts/sun50i-h5-nanopi-neo2.dtb"); ++ type = "flat_dt"; ++ compression = "none"; ++ }; ++ }; ++ configurations { ++ default = "config_1"; ++ ++ config_1 { ++ description = "sun50i-h5-nanopi-neo2"; ++ firmware = "uboot"; ++ loadables = "atf"; ++ fdt = "fdt_1"; ++ }; ++ }; ++}; +-- +2.25.1 + diff --git a/board/friendlyarm/nanopi-neo2/uboot/fit_spl.fragment b/board/friendlyarm/nanopi-neo2/uboot/fit_spl.fragment new file mode 100644 index 0000000000..50447d0dff --- /dev/null +++ b/board/friendlyarm/nanopi-neo2/uboot/fit_spl.fragment @@ -0,0 +1 @@ +CONFIG_SPL_FIT_SOURCE="board/friendlyarm/nanopi-neo2/fit_spl_atf.its" diff --git a/configs/friendlyarm_nanopi_neo2_defconfig b/configs/friendlyarm_nanopi_neo2_defconfig new file mode 100644 index 0000000000..b9cd8547ef --- /dev/null +++ b/configs/friendlyarm_nanopi_neo2_defconfig @@ -0,0 +1,50 @@ +BR2_aarch64=y +BR2_cortex_a53=y +BR2_ARM_FPU_VFPV4=y + +# Linux headers same as kernel, a 6.1 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y + +# Firmware +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE=v2.7 +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50i_a64" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y + +# Bootloader +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2023.10" +BR2_TARGET_UBOOT_PATCH="board/friendlyarm/nanopi-neo2/uboot" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi_neo2" +BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/friendlyarm/nanopi-neo2/uboot/fit_spl.fragment" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y +BR2_TARGET_UBOOT_FORMAT_ITB=y +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin" +BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="SCP=/dev/null" + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1.60" +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h5-nanopi-neo2" +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y + +# Filesystem +BR2_TARGET_GENERIC_ISSUE="Welcome to FriendlyARM NanoPi NEO2" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="120M" +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y +BR2_ROOTFS_POST_BUILD_SCRIPT="board/friendlyarm/nanopi-neo2/post-build.sh" +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-neo2/genimage.cfg" -- 2.25.1 _______________________________________________ buildroot mailing list buildroot@buildroot.org https://lists.buildroot.org/mailman/listinfo/buildroot