Re: [Buildroot] [PATCH 2/2] configs/pine64-star64: new defconfig

[Thomas Petazzoni via buildroot <buildroot@buildroot.org>]

Hello Thomas,

On Wed,  3 Apr 2024 11:14:40 +0200
Thomas Bonnefille via buildroot <buildroot@buildroot.org> wrote:

> This patch adds a new defconfig for the Star64 board made by Pine64. This
> board is based on the Starfive JH7110 RISC-V 64 bits SoC.
> https://wiki.pine64.org/wiki/STAR64
> This patch uses a custom Kernel and U-Boot made for this board. The SPL
> has to be signed with the Starfive SPL-Tool which is a software
> provided by the vendor to get the necessary headers on the SPL.
> The image configuration is based on the work done by Ivan Velickovic
> <i.velickovic@unsw.edu.au>.
> 
> Signed-off-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>

Thanks, I've applied after:

- adjusting the commit title pine64-star64 -> pine64_star64 (to match
  the name of the defconfig)

- adding the host-uboot-tools package with FIT support to the
  defconfig, so that it gets built. Otherwise the build fails at the
  end when the post-build script calls mkimage as mkimage is not
  available. Probably it was working on your machine because you had
  mkimage installed system-wide, but Buildroot shouldn't depend on this.

Thanks a lot!

Thomas
-- 
Thomas Petazzoni, co-owner and CEO, Bootlin
Embedded Linux and Kernel engineering and training
https://bootlin.com
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot