From: Florian Fainelli via buildroot <buildroot@buildroot.org>
To: buildroot@buildroot.org
Cc: "Eric Le Bihan" <eric.le.bihan.dev@free.fr>,
"Gary Bisson" <bisson.gary@gmail.com>,
"Jérôme Pouiller" <jezz@sysmic.org>,
"Florian Fainelli" <florian.fainelli@broadcom.com>,
"Bernd Kuhls" <bernd@kuhls.net>,
"Thomas Perale" <thomas.perale@mind.be>,
"Maxime Chevallier" <maxime.chevallier@bootlin.com>,
"Refik Tuzakli" <tuzakli.refik@gmail.com>,
"Francois Perrad" <francois.perrad.86@gmail.com>,
"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
"Arnout Vandecappelle" <arnout@rnout.be>,
"Petr Vorel" <petr.vorel@gmail.com>,
"Spenser Gilliland" <spenser@gillilanding.com>,
"Giulio Benetti" <giulio.benetti@benettiengineering.com>,
"Pascal de Bruijn" <p.debruijn@unilogic.nl>,
"Luca Ceresoli" <luca.ceresoli@bootlin.com>,
"Romain Naour" <romain.naour@gmail.com>,
"Mahyar Koshkouei" <mahyar.koshkouei@gmail.com>
Subject: [Buildroot] [PATCH 08/23] package: use <pkg>_SRCSUBDIR where <pkg>_SRCDIR used to include _SUBDIR
Date: Fri, 23 Oct 2026 14:51:23 -0700 [thread overview]
Message-ID: <20261023215138.2301146-2-florian.fainelli@broadcom.com> (raw)
In-Reply-To: <20261023215138.2301146-1-florian.fainelli@broadcom.com>
With <pkg>_SRCDIR no longer including <pkg>_SUBDIR, convert the
infrastructures and packages that relied on the old meaning (cargo,
hare, luarocks, meson, perl, waf, gcc-final) to <pkg>_SRCSUBDIR.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
---
package/gcc/gcc-final/gcc-final.mk | 2 +-
package/pkg-cargo.mk | 8 ++++----
package/pkg-hare.mk | 8 ++++----
package/pkg-luarocks.mk | 4 ++--
package/pkg-meson.mk | 26 +++++++++++++-------------
package/pkg-perl.mk | 12 ++++++------
package/pkg-waf.mk | 8 ++++----
7 files changed, 34 insertions(+), 34 deletions(-)
diff --git a/package/gcc/gcc-final/gcc-final.mk b/package/gcc/gcc-final/gcc-final.mk
index 97a64ae2fabf..570636a81dfe 100644
--- a/package/gcc/gcc-final/gcc-final.mk
+++ b/package/gcc/gcc-final/gcc-final.mk
@@ -51,7 +51,7 @@ HOST_GCC_FINAL_PRE_CONFIGURE_HOOKS += HOST_GCC_CONFIGURE_SYMLINK
# So we must completely override the generic commands and provide our own.
#
define HOST_GCC_FINAL_CONFIGURE_CMDS
- (cd $(HOST_GCC_FINAL_SRCDIR) && rm -rf config.cache; \
+ (cd $(HOST_GCC_FINAL_SRCSUBDIR) && rm -rf config.cache; \
$(HOST_CONFIGURE_OPTS) \
CFLAGS="$(HOST_CFLAGS)" \
LDFLAGS="$(HOST_LDFLAGS)" \
diff --git a/package/pkg-cargo.mk b/package/pkg-cargo.mk
index 47a6353f2592..aae6eb9b61aa 100644
--- a/package/pkg-cargo.mk
+++ b/package/pkg-cargo.mk
@@ -234,7 +234,7 @@ endif
ifndef $(2)_BUILD_CMDS
ifeq ($(4),target)
define $(2)_BUILD_CMDS
- cd $$($$(PKG)_SRCDIR) && \
+ cd $$($$(PKG)_SRCSUBDIR) && \
$$(TARGET_MAKE_ENV) \
$$(TARGET_CONFIGURE_OPTS) \
$$(PKG_CARGO_ENV) \
@@ -248,7 +248,7 @@ define $(2)_BUILD_CMDS
endef
else # ifeq ($(4),target)
define $(2)_BUILD_CMDS
- cd $$($$(PKG)_SRCDIR) && \
+ cd $$($$(PKG)_SRCSUBDIR) && \
$$(HOST_MAKE_ENV) \
$$(HOST_CONFIGURE_OPTS) \
$$(HOST_PKG_CARGO_ENV) \
@@ -269,7 +269,7 @@ endif # ifndef $(2)_BUILD_CMDS
#
ifndef $(2)_INSTALL_TARGET_CMDS
define $(2)_INSTALL_TARGET_CMDS
- cd $$($$(PKG)_SRCDIR) && \
+ cd $$($$(PKG)_SRCSUBDIR) && \
$$(TARGET_MAKE_ENV) \
$$(TARGET_CONFIGURE_OPTS) \
$$(PKG_CARGO_ENV) \
@@ -289,7 +289,7 @@ endif
ifndef $(2)_INSTALL_CMDS
define $(2)_INSTALL_CMDS
- cd $$($$(PKG)_SRCDIR) && \
+ cd $$($$(PKG)_SRCSUBDIR) && \
$$(HOST_MAKE_ENV) \
$$(HOST_CONFIGURE_OPTS) \
$$(HOST_PKG_CARGO_ENV) \
diff --git a/package/pkg-hare.mk b/package/pkg-hare.mk
index 15dc769311a8..a263b4d42ef3 100644
--- a/package/pkg-hare.mk
+++ b/package/pkg-hare.mk
@@ -48,10 +48,10 @@ ifndef $(2)_BUILD_CMDS
# https://harelang.org/documentation/usage/project-structure.html#makefiles
# but in real world, the target "all" is not always the default one
define $(2)_BUILD_CMDS
- if grep "^all:" $$($(2)_SRCDIR)Makefile > /dev/null; then \
+ if grep "^all:" $$($(2)_SRCSUBDIR)Makefile > /dev/null; then \
target=all ; \
fi ; \
- $(MAKE) -C $$($(2)_SRCDIR) HARE="$$(HARE_RUN_CMD)" HAREFLAGS="$$(HARE_ARCH_OPT) $$(HARE_LIBDIR_OPT)" $${target}
+ $(MAKE) -C $$($(2)_SRCSUBDIR) HARE="$$(HARE_RUN_CMD)" HAREFLAGS="$$(HARE_ARCH_OPT) $$(HARE_LIBDIR_OPT)" $${target}
endef
endif
@@ -61,7 +61,7 @@ endif
#
ifndef $(2)_INSTALL_STAGING_CMDS
define $(2)_INSTALL_STAGING_CMDS
- $(MAKE) -C $$($(2)_SRCDIR) PREFIX=/usr DESTDIR="$$(STAGING_DIR)" install
+ $(MAKE) -C $$($(2)_SRCSUBDIR) PREFIX=/usr DESTDIR="$$(STAGING_DIR)" install
endef
endif
@@ -71,7 +71,7 @@ endif
#
ifndef $(2)_INSTALL_TARGET_CMDS
define $(2)_INSTALL_TARGET_CMDS
- $(MAKE) -C $$($(2)_SRCDIR) PREFIX=/usr DESTDIR="$$(TARGET_DIR)" install
+ $(MAKE) -C $$($(2)_SRCSUBDIR) PREFIX=/usr DESTDIR="$$(TARGET_DIR)" install
endef
endif
diff --git a/package/pkg-luarocks.mk b/package/pkg-luarocks.mk
index abcd525fcf8a..9c12ed627b60 100644
--- a/package/pkg-luarocks.mk
+++ b/package/pkg-luarocks.mk
@@ -108,7 +108,7 @@ endif
#
ifndef $(2)_INSTALL_TARGET_CMDS
define $(2)_INSTALL_TARGET_CMDS
- cd $$($(2)_SRCDIR) && \
+ cd $$($(2)_SRCSUBDIR) && \
LUAROCKS_CONFIG=$$(LUAROCKS_CONFIG_FILE) \
$$(LUAROCKS_RUN_CMD) make --keep --deps-mode none \
--tree "$$(TARGET_DIR)/usr" \
@@ -125,7 +125,7 @@ endif
ifndef $(2)_INSTALL_CMDS
define $(2)_INSTALL_CMDS
- cd $$($(2)_SRCDIR) && \
+ cd $$($(2)_SRCSUBDIR) && \
LUAROCKS_CONFIG=$$(HOST_LUAROCKS_CONFIG_FILE) \
$$(LUAROCKS_RUN_CMD) make --keep --deps-mode none \
DEPS_DIR="$$(HOST_DIR)" \
diff --git a/package/pkg-meson.mk b/package/pkg-meson.mk
index f2efbae2eb72..350f597b7018 100644
--- a/package/pkg-meson.mk
+++ b/package/pkg-meson.mk
@@ -147,12 +147,12 @@ $(2)_CXXFLAGS ?= $$(TARGET_CXXFLAGS)
#
#
define $(2)_CONFIGURE_CMDS
- rm -rf $$($$(PKG)_SRCDIR)/buildroot-build
- mkdir -p $$($$(PKG)_SRCDIR)/buildroot-build
+ rm -rf $$($$(PKG)_SRCSUBDIR)/buildroot-build
+ mkdir -p $$($$(PKG)_SRCSUBDIR)/buildroot-build
sed -e "/^\[binaries\]$$$$/s:$$$$:$$(foreach x,$$($(2)_MESON_EXTRA_BINARIES),\n$$(x)):" \
-e "/^\[properties\]$$$$/s:$$$$:$$(foreach x,$$($(2)_MESON_EXTRA_PROPERTIES),\n$$(x)):" \
$$(call PKG_MESON_CROSSCONFIG_SED,$(2)_CFLAGS,$(2)_CXXFLAGS,$(2)_LDFLAGS,$(2)_FCFLAGS) \
- > $$($$(PKG)_SRCDIR)/buildroot-build/cross-compilation.conf
+ > $$($$(PKG)_SRCSUBDIR)/buildroot-build/cross-compilation.conf
PATH=$$(BR_PATH) \
CC_FOR_BUILD="$$(HOSTCC)" \
CXX_FOR_BUILD="$$(HOSTCXX)" \
@@ -162,21 +162,21 @@ define $(2)_CONFIGURE_CMDS
--libdir=lib \
--default-library=$(PKG_MESON_DEFAULT_LIBRARY) \
--buildtype=$(if $(BR2_ENABLE_RUNTIME_DEBUG),debug,release) \
- --cross-file=$$($$(PKG)_SRCDIR)/buildroot-build/cross-compilation.conf \
+ --cross-file=$$($$(PKG)_SRCSUBDIR)/buildroot-build/cross-compilation.conf \
-Db_pie=false \
-Db_staticpic=$(if $(BR2_m68k_cf),false,true) \
-Dstrip=false \
-Dbuild.pkg_config_path=$$(HOST_DIR)/lib/pkgconfig \
-Dbuild.cmake_prefix_path=$$(HOST_DIR)/lib/cmake \
$$($$(PKG)_CONF_OPTS) \
- $$($$(PKG)_SRCDIR) $$($$(PKG)_SRCDIR)/buildroot-build
+ $$($$(PKG)_SRCSUBDIR) $$($$(PKG)_SRCSUBDIR)/buildroot-build
endef
else
# Configure package for host
define $(2)_CONFIGURE_CMDS
- rm -rf $$($$(PKG)_SRCDIR)/buildroot-build
- mkdir -p $$($$(PKG)_SRCDIR)/buildroot-build
+ rm -rf $$($$(PKG)_SRCSUBDIR)/buildroot-build
+ mkdir -p $$($$(PKG)_SRCSUBDIR)/buildroot-build
$$(HOST_CONFIGURE_OPTS) \
$$($$(PKG)_CONF_ENV) $$(MESON) setup \
--prefix=$$(HOST_DIR) \
@@ -188,7 +188,7 @@ define $(2)_CONFIGURE_CMDS
--wrap-mode=nodownload \
-Dstrip=true \
$$($$(PKG)_CONF_OPTS) \
- $$($$(PKG)_SRCDIR) $$($$(PKG)_SRCDIR)/buildroot-build
+ $$($$(PKG)_SRCSUBDIR) $$($$(PKG)_SRCSUBDIR)/buildroot-build
endef
endif
endif
@@ -203,12 +203,12 @@ ifndef $(2)_BUILD_CMDS
ifeq ($(4),target)
define $(2)_BUILD_CMDS
$$(TARGET_MAKE_ENV) $$($$(PKG)_NINJA_ENV) \
- $$(NINJA) $$(NINJA_OPTS) $$($$(PKG)_NINJA_OPTS) -C $$($$(PKG)_SRCDIR)/buildroot-build
+ $$(NINJA) $$(NINJA_OPTS) $$($$(PKG)_NINJA_OPTS) -C $$($$(PKG)_SRCSUBDIR)/buildroot-build
endef
else
define $(2)_BUILD_CMDS
$$(HOST_MAKE_ENV) $$($$(PKG)_NINJA_ENV) \
- $$(NINJA) $$(NINJA_OPTS) $$($$(PKG)_NINJA_OPTS) -C $$($$(PKG)_SRCDIR)/buildroot-build
+ $$(NINJA) $$(NINJA_OPTS) $$($$(PKG)_NINJA_OPTS) -C $$($$(PKG)_SRCSUBDIR)/buildroot-build
endef
endif
endif
@@ -220,7 +220,7 @@ endif
ifndef $(2)_INSTALL_CMDS
define $(2)_INSTALL_CMDS
$$(HOST_MAKE_ENV) $$($$(PKG)_NINJA_ENV) \
- $$(NINJA) $$(NINJA_OPTS) -C $$($$(PKG)_SRCDIR)/buildroot-build install
+ $$(NINJA) $$(NINJA_OPTS) -C $$($$(PKG)_SRCSUBDIR)/buildroot-build install
endef
endif
@@ -231,7 +231,7 @@ endif
ifndef $(2)_INSTALL_STAGING_CMDS
define $(2)_INSTALL_STAGING_CMDS
$$(TARGET_MAKE_ENV) $$($$(PKG)_NINJA_ENV) DESTDIR=$$(STAGING_DIR) \
- $$(NINJA) $$(NINJA_OPTS) -C $$($$(PKG)_SRCDIR)/buildroot-build install
+ $$(NINJA) $$(NINJA_OPTS) -C $$($$(PKG)_SRCSUBDIR)/buildroot-build install
endef
endif
@@ -242,7 +242,7 @@ endif
ifndef $(2)_INSTALL_TARGET_CMDS
define $(2)_INSTALL_TARGET_CMDS
$$(TARGET_MAKE_ENV) $$($$(PKG)_NINJA_ENV) DESTDIR=$$(TARGET_DIR) \
- $$(NINJA) $$(NINJA_OPTS) -C $$($$(PKG)_SRCDIR)/buildroot-build install
+ $$(NINJA) $$(NINJA_OPTS) -C $$($$(PKG)_SRCSUBDIR)/buildroot-build install
endef
endif
diff --git a/package/pkg-perl.mk b/package/pkg-perl.mk
index 1ecf31eff9ca..1fbfb00e3796 100644
--- a/package/pkg-perl.mk
+++ b/package/pkg-perl.mk
@@ -67,7 +67,7 @@ ifeq ($(4),target)
# Configure package for target
define $(2)_CONFIGURE_CMDS
- cd $$($$(PKG)_SRCDIR) && if [ -f Build.PL ] && [ $$($(2)_PREFER_INSTALLER) != "EUMM" ] ; then \
+ cd $$($$(PKG)_SRCSUBDIR) && if [ -f Build.PL ] && [ $$($(2)_PREFER_INSTALLER) != "EUMM" ] ; then \
$$($(2)_CONF_ENV) \
PERL_MM_USE_DEFAULT=1 \
$$(PERL_RUN) Build.PL \
@@ -118,7 +118,7 @@ else
# Configure package for host
define $(2)_CONFIGURE_CMDS
- cd $$($$(PKG)_SRCDIR) && if [ -f Build.PL ] && [ $$($(2)_PREFER_INSTALLER) != "EUMM" ] ; then \
+ cd $$($$(PKG)_SRCSUBDIR) && if [ -f Build.PL ] && [ $$($(2)_PREFER_INSTALLER) != "EUMM" ] ; then \
$$($(2)_CONF_ENV) \
PERL_MM_USE_DEFAULT=1 \
$$(PERL_RUN) Build.PL \
@@ -144,7 +144,7 @@ ifeq ($(4),target)
# Build package for target
define $(2)_BUILD_CMDS
- cd $$($$(PKG)_SRCDIR) && if [ -f Build.PL ] && [ $$($(2)_PREFER_INSTALLER) != "EUMM" ] ; then \
+ cd $$($$(PKG)_SRCSUBDIR) && if [ -f Build.PL ] && [ $$($(2)_PREFER_INSTALLER) != "EUMM" ] ; then \
$$(PERL_RUN) Build $$($(2)_BUILD_OPTS) build; \
else \
$$(MAKE1) \
@@ -156,7 +156,7 @@ else
# Build package for host
define $(2)_BUILD_CMDS
- cd $$($$(PKG)_SRCDIR) && if [ -f Build.PL ] && [ $$($(2)_PREFER_INSTALLER) != "EUMM" ] ; then \
+ cd $$($$(PKG)_SRCSUBDIR) && if [ -f Build.PL ] && [ $$($(2)_PREFER_INSTALLER) != "EUMM" ] ; then \
$$(PERL_RUN) Build $$($(2)_BUILD_OPTS) build; \
else \
$$(MAKE1) $$($(2)_BUILD_OPTS) pure_all; \
@@ -171,7 +171,7 @@ endif
#
ifndef $(2)_INSTALL_CMDS
define $(2)_INSTALL_CMDS
- cd $$($$(PKG)_SRCDIR) && if [ -f Build.PL ] && [ $$($(2)_PREFER_INSTALLER) != "EUMM" ] ; then \
+ cd $$($$(PKG)_SRCSUBDIR) && if [ -f Build.PL ] && [ $$($(2)_PREFER_INSTALLER) != "EUMM" ] ; then \
$$(PERL_RUN) Build $$($(2)_INSTALL_TARGET_OPTS) install; \
else \
$$(MAKE1) $$($(2)_INSTALL_TARGET_OPTS) pure_install; \
@@ -185,7 +185,7 @@ endif
#
ifndef $(2)_INSTALL_TARGET_CMDS
define $(2)_INSTALL_TARGET_CMDS
- cd $$($$(PKG)_SRCDIR) && if [ -f Build.PL ] && [ $$($(2)_PREFER_INSTALLER) != "EUMM" ] ; then \
+ cd $$($$(PKG)_SRCSUBDIR) && if [ -f Build.PL ] && [ $$($(2)_PREFER_INSTALLER) != "EUMM" ] ; then \
$$(PERL_RUN) Build $$($(2)_INSTALL_TARGET_OPTS) install; \
else \
$$(MAKE1) $$($(2)_INSTALL_TARGET_OPTS) pure_install; \
diff --git a/package/pkg-waf.mk b/package/pkg-waf.mk
index 0529bb6ddaf2..c41d7314a132 100644
--- a/package/pkg-waf.mk
+++ b/package/pkg-waf.mk
@@ -65,7 +65,7 @@ endif
#
ifndef $(2)_CONFIGURE_CMDS
define $(2)_CONFIGURE_CMDS
- cd $$($$(PKG)_SRCDIR) && \
+ cd $$($$(PKG)_SRCSUBDIR) && \
$$(TARGET_CONFIGURE_OPTS) \
$$($(2)_CONF_ENV) \
$$(HOST_DIR)/bin/python3 $$($(2)_WAF) configure \
@@ -82,7 +82,7 @@ endif
#
ifndef $(2)_BUILD_CMDS
define $(2)_BUILD_CMDS
- cd $$($$(PKG)_SRCDIR) && \
+ cd $$($$(PKG)_SRCSUBDIR) && \
$$(TARGET_MAKE_ENV) $$($$(PKG)_MAKE_ENV) $$(HOST_DIR)/bin/python3 $$($(2)_WAF) \
build $$(WAF_OPTS) $$($(2)_BUILD_OPTS) \
$$($(2)_WAF_OPTS)
@@ -95,7 +95,7 @@ endif
#
ifndef $(2)_INSTALL_STAGING_CMDS
define $(2)_INSTALL_STAGING_CMDS
- cd $$($$(PKG)_SRCDIR) && \
+ cd $$($$(PKG)_SRCSUBDIR) && \
$$(TARGET_MAKE_ENV) $$($$(PKG)_MAKE_ENV) $$(HOST_DIR)/bin/python3 $$($(2)_WAF) \
install --destdir=$$(STAGING_DIR) \
$$($(2)_INSTALL_STAGING_OPTS) \
@@ -109,7 +109,7 @@ endif
#
ifndef $(2)_INSTALL_TARGET_CMDS
define $(2)_INSTALL_TARGET_CMDS
- cd $$($$(PKG)_SRCDIR) && \
+ cd $$($$(PKG)_SRCSUBDIR) && \
$$(TARGET_MAKE_ENV) $$($$(PKG)_MAKE_ENV) $$(HOST_DIR)/bin/python3 $$($(2)_WAF) \
install --destdir=$$(TARGET_DIR) \
$$($(2)_INSTALL_TARGET_OPTS) \
--
2.34.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
next prev parent reply other threads:[~2026-10-23 21:52 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-23 21:47 [Buildroot] [PATCH 00/23] Support building the Linux kernel out of tree with LINUX_OVERRIDE_SRCDIR Florian Fainelli via buildroot
2026-10-23 21:47 ` [Buildroot] [PATCH 01/23] package: prepare removal of <pkg>_DIR Florian Fainelli via buildroot
2026-10-23 21:47 ` [Buildroot] [PATCH 02/23] infra: introduce a global SRC_DIR variable Florian Fainelli via buildroot
2026-10-23 21:47 ` [Buildroot] [PATCH 03/23] package: fix <pkg>_SRCDIR and <pkg>_BUILDDIR values Florian Fainelli via buildroot
2026-10-23 21:47 ` [Buildroot] [PATCH 04/23] boot/boot-wrapper-aarch64: needs LINUX_BUILDDIR Florian Fainelli via buildroot
2026-10-23 21:47 ` [Buildroot] [PATCH 05/23] boot/mxs-bootlets: needs (BAREBOX, LINUX, UBOOT)_BUILDDIR Florian Fainelli via buildroot
2026-10-23 21:47 ` [Buildroot] [PATCH 06/23] linux/extensions: point to proper _SRCDIR and @D Florian Fainelli via buildroot
2026-10-23 21:47 ` [Buildroot] [PATCH 07/23] linux/linux: LINUX_VERSION_PROBED should run from build directory Florian Fainelli via buildroot
2026-10-23 21:51 ` Florian Fainelli via buildroot
2026-10-23 21:51 ` Florian Fainelli via buildroot [this message]
2026-10-23 21:51 ` [Buildroot] [PATCH 09/23] linux: build out of tree when LINUX_OVERRIDE_SRCDIR is set Florian Fainelli via buildroot
2026-10-23 21:51 ` [Buildroot] [PATCH 10/23] packages: sync host and target patch hooks Florian Fainelli via buildroot
2026-10-23 21:51 ` [Buildroot] [PATCH 11/23] omniorb: avoid target-only patch hook Florian Fainelli via buildroot
2026-10-23 21:51 ` [Buildroot] [PATCH 12/23] lua: rework post-patch hook usage Florian Fainelli via buildroot
2026-10-24 10:46 ` François PERRAD
2026-10-27 16:43 ` Florian Fainelli via buildroot
2026-10-23 21:51 ` [Buildroot] [PATCH 13/23] infra: host packages inherit the target extra downloads Florian Fainelli via buildroot
2026-10-23 21:51 ` [Buildroot] [PATCH 14/23] package/libtool: use post-patch hooks Florian Fainelli via buildroot
2026-10-23 21:51 ` [Buildroot] [PATCH 15/23] package/libtool: also apply libtool-patch to host libtool Florian Fainelli via buildroot
2026-10-23 21:51 ` [Buildroot] [PATCH 16/23] package/{ffmpeg, libvpx}: use $(@D) instead of $(pkg_SRCDIR) when possible Florian Fainelli via buildroot
2026-10-23 21:51 ` [Buildroot] [PATCH 17/23] package/perl: apply the perl-cross even for the host variant Florian Fainelli via buildroot
2026-10-24 10:20 ` François PERRAD
2026-10-27 16:44 ` Florian Fainelli via buildroot
2026-10-23 21:51 ` [Buildroot] [PATCH 18/23] infra/autotools: warn for package that autoreconf without libtool patch Florian Fainelli via buildroot
2026-10-23 21:51 ` [Buildroot] [PATCH 19/23] packages: replace $(PKG)_DIR with @D where possible Florian Fainelli via buildroot
2026-10-23 21:51 ` [Buildroot] [PATCH 20/23] linux: support custom logo and devicetree files in out-of-tree builds Florian Fainelli via buildroot
2026-10-23 21:51 ` [Buildroot] [PATCH 21/23] package/linux-tools: support an out-of-tree kernel build Florian Fainelli via buildroot
2026-10-23 21:51 ` [Buildroot] [PATCH 22/23] package: read kernel headers from LINUX_SRCDIR Florian Fainelli via buildroot
2026-10-23 21:51 ` [Buildroot] [PATCH 23/23] docs/manual: document out-of-tree package builds and the new srcdir variables Florian Fainelli via buildroot
2026-10-24 20:44 ` [Buildroot] [PATCH 00/23] Support building the Linux kernel out of tree with LINUX_OVERRIDE_SRCDIR Thomas Petazzoni via buildroot
2026-10-26 21:49 ` Florian Fainelli via buildroot
2026-10-27 8:14 ` Arnout Vandecappelle via buildroot
2026-10-27 8:26 ` Thomas Petazzoni via buildroot
2026-10-27 8:43 ` Arnout Vandecappelle via buildroot
2026-10-27 12:41 ` Thomas Petazzoni via buildroot
2026-10-27 12:44 ` Thomas Petazzoni via buildroot
2026-10-27 13:53 ` Arnout Vandecappelle via buildroot
2026-10-27 16:53 ` Florian Fainelli via buildroot
2026-10-27 19:22 ` Thomas Petazzoni via buildroot
2026-10-27 19:56 ` Florian Fainelli via buildroot
2026-10-28 18:16 ` Thomas Petazzoni via buildroot
2026-10-28 18:35 ` Florian Fainelli via buildroot
2026-10-28 19:26 ` Thomas Petazzoni via buildroot
2026-10-27 20:32 ` Fiona Klute via buildroot
2026-10-28 18:18 ` Thomas Petazzoni via buildroot
2026-10-28 18:34 ` Florian Fainelli via buildroot
2026-10-28 19:26 ` Thomas Petazzoni via buildroot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261023215138.2301146-2-florian.fainelli@broadcom.com \
--to=buildroot@buildroot.org \
--cc=arnout@rnout.be \
--cc=bernd@kuhls.net \
--cc=bisson.gary@gmail.com \
--cc=eric.le.bihan.dev@free.fr \
--cc=florian.fainelli@broadcom.com \
--cc=francois.perrad.86@gmail.com \
--cc=giulio.benetti@benettiengineering.com \
--cc=jezz@sysmic.org \
--cc=luca.ceresoli@bootlin.com \
--cc=mahyar.koshkouei@gmail.com \
--cc=maxime.chevallier@bootlin.com \
--cc=p.debruijn@unilogic.nl \
--cc=petr.vorel@gmail.com \
--cc=romain.naour@gmail.com \
--cc=spenser@gillilanding.com \
--cc=thomas.perale@mind.be \
--cc=thomas.petazzoni@bootlin.com \
--cc=tuzakli.refik@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox