From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michael Trimarchi Date: Wed, 24 Oct 2007 18:37:52 +0000 (GMT) Subject: [Buildroot] Dataflash rootfs problems (still) Message-ID: <205592.59570.qm@web26204.mail.ukl.yahoo.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hi, >I've sucessfully built several root filesystems for my custom board (AT91RM9200 + 8MiB DataFlash), but now i'm >facing a strange problem. >I'm using a JFFS2 filesystem on an MTD partition into the DataFlash, my rootfs boots OK, but ONLY for the first time. >See steps: >1) Create a rootfs JFFS2 image using buildroot -> OK >2) Erase entire flash partition: I boot from an initrd containing mtd-tools for this purpouse. -> OK >3) Dump the rootfs image "rootfs.jffs2" into the Dataflash (i use loadb from u-boot here...) -> OK >4) Boot the system... -> OK >5) Login and issue a simple reboot, no other commands...nothing else.... -> OK >After the reboot at step "5" the system comes again, but now when is press BACKSPACE it writes a space, and if i try >to add a user or change the root password >i always get a "/etc/passwd" not found. Is a problem of your busybox configuration :) Regards Michael ___________________________________ L'email della prossima generazione? Puoi averla con la nuova Yahoo! Mail: http://it.docs.yahoo.com/nowyoucan.html -------------- next part -------------- An HTML attachment was scrubbed... URL: http://busybox.net/lists/buildroot/attachments/20071024/44dc3067/attachment.htm