From mboxrd@z Thu Jan 1 00:00:00 1970 From: Christopher Taylor Date: Thu, 24 Apr 2008 10:57:27 -0400 Subject: [Buildroot] Buildroot for AT91RM9200EK? In-Reply-To: <974174.17096.qm@web31809.mail.mud.yahoo.com> References: <844460.38324.qm@web31807.mail.mud.yahoo.com> <974174.17096.qm@web31809.mail.mud.yahoo.com> Message-ID: <2590773a0804240757t95809dw7bb7a9d025bd7cc1@mail.gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net You're using the wrong mkimage. Beleive it or not, there are actually two different binaries with the same name.... a pain in the rear, I know. The one from jiget is _NOT_ the one you need. I only know this because I had the same problem ;) HTH! -Chris On Wed, Apr 23, 2008 at 8:07 PM, Pink Boy wrote: > Found one issue, > > The version of mkimage that I had installed was from the jiget > package not the one that comes with UBoot. I uninstalled > jiget and mkImage and then tried getting menu config to build > UBoot and hopefully the mkImage utility, but I get the following, > > -bris-- > u-boot-1.2.0-atmel/lib_nios2/cache.S > u-boot-1.2.0-atmel/lib_nios2/board.c > u-boot-1.2.0-atmel/.patched.u-boot-1.2.0-atmel-patch.tar.bz2 > u-boot-1.2.0-atmel/CREDITS > u-boot-1.2.0-atmel/blackfin_config.mk > touch /home/tu/workspace/arm920_tool/buildroot/build_arm/u-boot-1.2.0-atmel/.unpacked > wget --passive-ftp -nd -P /home/tu/workspace/arm920_tool/buildroot/dl ftp://www.at91.com/pub/buildroot//u-boot-1.2.0-atmel-patch.tar.bz2 > --16:00:37-- ftp://www.at91.com/pub/buildroot//u-boot-1.2.0-atmel-patch.tar.bz2 > => `/home/tu/workspace/arm920_tool/buildroot/dl/u-boot-1.2.0-atmel-patch.tar.bz2' > Resolving www.at91.com... 194.2.24.29 > Connecting to www.at91.com|194.2.24.29|:21... connected. > Logging in as anonymous ... Logged in! > ==> SYST ... done. ==> PWD ... done. > ==> TYPE I ... done. ==> CWD /pub/buildroot/ ... done. > ==> PASV ... done. ==> RETR u-boot-1.2.0-atmel-patch.tar.bz2 ... done. > Length: 242 (unauthoritative) > > 100%[=====================================================================================>] 242 --.--K/s > > 16:00:39 (9.53 MB/s) - `/home/tu/workspace/arm920_tool/buildroot/dl/u-boot-1.2.0-atmel-patch.tar.bz2' saved [242] > > mkdir -p /home/tu/workspace/arm920_tool/buildroot/project_build_arm/uclibc/u-boot-patches > bzcat /home/tu/workspace/arm920_tool/buildroot/dl/u-boot-1.2.0-atmel-patch.tar.bz2 | tar -C /home/tu/workspace/arm920_tool/buildroot/project_build_arm/uclibc/u-boot-patches -xvf - > u-boot-1.2.0-atmel-patch/README.txt > u-boot-1.2.0-atmel-patch/README.txt~ > touch /home/tu/workspace/arm920_tool/buildroot/project_build_arm/uclibc/u-boot-patches/.unpacked > toolchain/patch-kernel.sh /home/tu/workspace/arm920_tool/buildroot/build_arm/u-boot-1.2.0-atmel /home/tu/workspace/arm920_tool/buildroot/project_build_arm/uclibc/u-boot-patches \*.patch > touch /home/tu/workspace/arm920_tool/buildroot/build_arm/u-boot-1.2.0-atmel/.patched.u-boot-1.2.0-atmel-patch.tar.bz2 > cp target/device/Atmel/at91rm9200ek/u-boot/at91rm9200ek.h /home/tu/workspace/arm920_tool/buildroot/build_arm/u-boot-1.2.0-atmel/include/configs/. > cp: cannot stat `target/device/Atmel/at91rm9200ek/u-boot/at91rm9200ek.h': No such file or directory > make: *** [/home/tu/workspace/arm920_tool/buildroot/project_build_arm/uclibc/u-boot-1.2.0-atmel/.configured] Error 1 > > tu at Matt-LinuxDev:~/workspace/arm920_tool/buildroot$ > > Looking there seems there is no at91rm9200ek.h file > > > I did try and build the tool chain and UBoot for the Atmel AT91rm9260 > dev board and it built without an error. > > I think this means that build root support for the Atmel AT91rm9200ek > dev board is currently broken > > I'm also thinking that Linux support for the Atmel AT91rm9200 > microprocessor is spotty at best and maybe I should switch > parts? (I feel after banging on this that without an experience > with a working tool chain built with buildroot, there is realy > no way I can fix this) > > Mr Foo > > ----- > > > > > --- On Sat, 4/19/08, Pink Boy wrote: > > > From: Pink Boy > > Subject: Re: [Buildroot] Buildroot for AT91RM9200EK? > > To: buildroot at uclibc.org > > Date: Saturday, April 19, 2008, 7:42 PM > > > > Hi, > > > > One more thing, the command that seems to bomb, > > > > > > cp -pf > > /home/tu/workspace/arm920_tool/buildroot/project_build_arm/uclibc/linux-2.6.22.1/arch/arm/boot/uImage > > /home/tu/workspace/arm920_tool/buildroot/binaries/uclibc/at91rm9200ek-linux-2.6.22.1-20080420.gz > > > > The is no uImage in the source folder, there is however a > > zImage. > > > > ??? > > > > Mr Foo > > > > _______________________________________________ > > buildroot mailing list > > buildroot at uclibc.org > > http://busybox.net/mailman/listinfo/buildroot > _______________________________________________ > buildroot mailing list > buildroot at uclibc.org > http://busybox.net/mailman/listinfo/buildroot >