From mboxrd@z Thu Jan 1 00:00:00 1970 From: sunr2007 Date: Thu, 25 Mar 2010 11:11:36 -0700 (PDT) Subject: [Buildroot] unable to login to buildroot Message-ID: <28032853.post@talk.nabble.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hi all, i built a jffs2 filesystem by using make at91sam9261ek_config for buildroot.2010.02 . everything went fine but im unable to login on to my target board :( when i type root and press enter it is redirecting me back to the login and when i press any other name , it asks for password but again come back to login when i press enter "Welcome to Buildroot buildroot login: root Welcome to Buildroot buildroot login: ravi Password: Welcome to Buildroot buildroot login: " below is my /etc/inittab file any idea what might be wrong? # /etc/inittab # # Copyright (C) 2001 Erik Andersen # # Note: BusyBox init doesn't support runlevels. The runlevels field is # completely ignored by BusyBox init. If you want runlevels, use # sysvinit. # # Format for each entry: ::: # # id == tty to run on, or empty for /dev/console # runlevels == ignored # action == one of sysinit, respawn, askfirst, wait, and once # process == program to run # Startup the system null::sysinit:/bin/mount -o remount,rw / null::sysinit:/bin/mount -t proc proc /proc null::sysinit:/bin/mount -a null::sysinit:/bin/hostname -F /etc/hostname null::sysinit:/sbin/ifconfig lo 127.0.0.1 up null::sysinit:/sbin/route add -net 127.0.0.0 netmask 255.0.0.0 lo # now run any rc scripts ::sysinit:/etc/init.d/rcS # Set up a couple of getty's #tty1::respawn:/sbin/getty 38400 tty1 #tty2::respawn:/sbin/getty 38400 tty2 # Put a getty on the serial port ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100 # Logging junk null::sysinit:/bin/touch /var/log/messages null::respawn:/sbin/syslogd -n -m 0 null::respawn:/sbin/klogd -n tty3::respawn:/usr/bin/tail -f /var/log/messages # Stuff to do for the 3-finger salute ::ctrlaltdel:/sbin/reboot # Stuff to do before rebooting null::shutdown:/usr/bin/killall klogd null::shutdown:/usr/bin/killall syslogd null::shutdown:/bin/umount -a -r null::shutdown:/sbin/swapoff -a any idea what is wrong ? how to debug this? warm regards, Ravi Kulkarni. -- View this message in context: http://old.nabble.com/unable-to-login-to-buildroot-tp28032853p28032853.html Sent from the BuildRoot mailing list archive at Nabble.com.