From mboxrd@z Thu Jan  1 00:00:00 1970
From: Privat <zentrale.at.work@gmail.com>
Date: Thu, 08 Nov 2007 14:28:24 +0100
Subject: [Buildroot] BR for at91rm9200dk-based board
Message-ID: <47330EF8.6010803@googlemail.com>
List-Id: <buildroot.busybox.net>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: buildroot@busybox.net

Hi all!

I'm trying to build a valid root fs and keep running into some issues. 
The u-boot/kernel configuration seems fine, and so does the toolchain 
generated by BR. The main problems at the moment are:
- BR does not create _any_ dev nodes.
- the getty on ttyS0 goes into nirvana
- when doing init=/bin/sh the shell loads fine, but gives the error: 
"can't access tty, job control turned off"

as well as some several smaller issues, but all related to the point 
where init takes over and an initial console is to be created.
Can anyone give me some hints where to go hunting for the bugs?

ah, btw: busybox wants only to use the config named 
"busybox-1.7.2.config, located in "/", no matter what given to 
buildroot... looks like a bug to me.

Thanks in advance,

ZaP

-- 
Sepp "ZaP" Holzmayr

please reply to:
zentrale.der.macht at gmail.com

watch out for:
www.rocksociety.de