From: Joseph G. Boike <joe.boike@acsatlanta.com>
To: buildroot@busybox.net
Subject: [Buildroot] macro `AM_PROG_LIBTOOL' not found
Date: Tue, 10 Jun 2008 14:51:20 -0500 [thread overview]
Message-ID: <484EDB38.8030308@acsatlanta.com> (raw)
Hi,
I'm trying to cross compile buildroot for and Atmel at91sam9260 ARM
processor and keep getting the same error below.
I started w/ a clean buildroot subdirectory and used the default make
(make at91sam9260_defconfig) setup.
My native autoconf, automake and libtool are all in /usr/bin
The error references m4_pattern_allow. Where do I add that? How do I
keep it if I get a new version of buildroot?
Regards,
Joe
This is the end of the build:
toolchain/patch-kernel.sh
/home/lorenzo/buildroot/build_arm/libusb-0.1.12 package/libusb/
libusb-0.1.12\*.patch*
Applying libusb-0.1.12-nocpp.patch using plaintext:
patching file Makefile.am
/home/lorenzo/buildroot/toolchain_build_arm/bin/sed -i -e
's,^all:.*,all:,g'
/home/lorenzo/buildroot/build_arm/libusb-0.1.12/tests/Makefile.in
/home/lorenzo/buildroot/toolchain_build_arm/bin/sed -i -e
's,^install:.*,install:,g'
/home/lorenzo/buildroot/build_arm/libusb-0.1.12/tests/Makefile.in
cp -f package/gnuconfig/config.sub package/gnuconfig/config.guess
/home/lorenzo/buildroot/build_arm/libusb-0.1.12
cd /home/lorenzo/buildroot/build_arm/libusb-0.1.12 &&
PATH="/home/lorenzo/buildroot/toolchain_build_arm/bin:/home/lorenzo/buildroot/build_arm/staging_dir/bin:/home/lorenzo/buildroot/build_arm/staging_dir/usr/bin:/usr/lib/qt-3.3/bin:/usr/kerberos/bin:/usr/lib/ccache:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/lorenzo/usr/cross/arm-newlib/bin:/home/JoeB/bin:/home/lorenzo/usr/cross/arm-newlib/bin:/home/lorenzo/usr/cross/arm-newlib/bin"
AR="/usr/bin/ar" AS="/usr/bin/as" LD="/usr/bin/ld " NM="/usr/bin/nm"
CC="/usr/lib/ccache/gcc " GCC="/usr/lib/ccache/gcc "
CXX="/usr/lib/ccache/g++ " CPP="/usr/bin/cpp "
AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as"
CC_FOR_BUILD="/usr/lib/ccache/gcc" GCC_FOR_BUILD="/usr/lib/ccache/gcc"
CXX_FOR_BUILD="/usr/lib/ccache/g++" LD_FOR_BUILD="/usr/bin/ld"
FC_FOR_BUILD="/usr/bin/ld" CFLAGS_FOR_BUILD="" CXXFLAGS_FOR_BUILD=""
LDFLAGS_FOR_BUILD="" FCFLAGS_FOR_BUILD=""
AR_FOR_TARGET="/home/lorenzo/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclibc-ar"
AS_FOR_TARGET="/home/lorenzo/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclibc-as"
CC_FOR_TARGET="/home/lorenzo/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclibc-gcc"
LD_FOR_TARGET="/home/lorenzo/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclibc-ld"
NM_FOR_TARGET="/home/lorenzo/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclibc-nm"
RANLIB_FOR_TARGET="/home/lorenzo/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclibc-ranlib"
STRIP_FOR_TARGET="/home/lorenzo/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclibc-strip"
OBJCOPY_FOR_TARGET="/home/lorenzo/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclibc-objcopy"
OBJDUMP_FOR_TARGET="/home/lorenzo/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclibc-objdump"
DEFAULT_ASSEMBLER="/home/lorenzo/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclibc-as"
DEFAULT_LINKER="/home/lorenzo/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclibc-ld"
ORIGINAL_AS_FOR_TARGET="/home/lorenzo/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclibc-as"
ORIGINAL_LD_FOR_TARGET="/home/lorenzo/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclibc-ld"
ORIGINAL_NM_FOR_TARGET="/home/lorenzo/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclibc-nm"
ORIGINAL_OBJDUMP_FOR_TARGET="/home/lorenzo/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclibc-objdump"
ACLOCAL="aclocal -I
/home/lorenzo/buildroot/build_arm/staging_dir/usr/share/aclocal"
autoreconf -v -f -i -I
"/home/lorenzo/buildroot/build_arm/staging_dir/usr/share/aclocal"
autoreconf: Entering directory `.'
autoreconf: configure.in: not using Gettext
autoreconf: running: aclocal -I
/home/lorenzo/buildroot/build_arm/staging_dir/usr/share/aclocal --force
configure.in:84: warning: macro `AM_PROG_LIBTOOL' not found in library
autoreconf: configure.in: tracing
autoreconf: configure.in: not using Libtool
autoreconf: running:
/home/lorenzo/buildroot/build_arm/staging_dir/usr/bin/autoconf
--include=/home/lorenzo/buildroot/build_arm/staging_dir/usr/share/aclocal
--force
configure.in:84: error: possibly undefined macro: AM_PROG_LIBTOOL
If this token and others are legitimate, please use m4_pattern_allow.
See the Autoconf documentation.
autoreconf:
/home/lorenzo/buildroot/build_arm/staging_dir/usr/bin/autoconf failed
with exit status: 1
make: *** [/home/lorenzo/buildroot/build_arm/libusb-0.1.12/.unpacked]
Error 1
[JoeB at elab14_linux buildroot]$
next reply other threads:[~2008-06-10 19:51 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-10 19:51 Joseph G. Boike [this message]
2008-06-13 5:54 ` [Buildroot] macro `AM_PROG_LIBTOOL' not found Hamish Moffatt
2008-06-13 8:48 ` Peter Korsgaard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=484EDB38.8030308@acsatlanta.com \
--to=joe.boike@acsatlanta.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox