From mboxrd@z Thu Jan 1 00:00:00 1970 From: Anders Blomdell Date: Mon, 13 Oct 2008 10:06:06 +0200 Subject: [Buildroot] BR2_PACKAGE_BUSYBOX_CONFIG and Atmel targets In-Reply-To: <20081013073057.GA9429@mx.loc> References: <48F1CE78.3040908@control.lth.se> <20081013081228.14f1e6c7@hcegtvedt> <48F2EF1B.70102@control.lth.se> <20081013073057.GA9429@mx.loc> Message-ID: <48F3016E.9080308@control.lth.se> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Bernhard Reutner-Fischer wrote: > On Mon, Oct 13, 2008 at 08:47:55AM +0200, Anders Blomdell wrote: >> Hans-Christian Egtvedt wrote: >>> On Sun, 12 Oct 2008 12:16:24 +0200 >>> Anders Blomdell wrote: >>> >>>> in target/device/Atmel/atngw100/Makefile.in there is a line >>>> >>>> BR2_PACKAGE_BUSYBOX_CONFIG:=$(BOARD_PATH)/busybox-1.9.1.config >>>> >>>> unfortunately this makes it impossible to change busybox config >>>> (primarily I want to turn off telnet) to a custom version. What is >>>> the correct way to handle this? >>>> >>> Well, naming indicates that you will need to add a >>> busybox-.config file. >> And change the Makfile.in as well, IMHO that is the wrong path to follow. >>> It is probably a good idea to scrap the part as well, just >>> have a generic busybox.config file. Kconfig options should not change >>> that often, and user will be asked to answer yes/no to new features >>> most times. >> Is there any good reason at all to unconditionally ignore the busybox >> config choosen by the user (many of the Atmel boards and a few other >> does this)? Would a patch that just removes all these unconditional >> configurations be accepted, or is there any deep reason for not allowing >> Atmel users choose their own busybox configuration (and in the default >> case choose the buildroot default instead of a board specific one)? > > Did you read docs/README and try what's documented there (see > "finegrained")? No, missed that (or more correctly I interpreted that setting BR2_PACKAGE_BUSYBOX_CONFIG should be equivalent). Regards Anders Blomdell -- Anders Blomdell Email: anders.blomdell at control.lth.se Department of Automatic Control Lund University Phone: +46 46 222 4625 P.O. Box 118 Fax: +46 46 138118 SE-221 00 Lund, Sweden