[Buildroot] R: AT91SAM9G20 build .config for linux-2.6.26

[Mauro Condarelli <mcondarelli@soft-in.com>]

Michael Trimarchi ha scritto:
> Hi,
>
> --- Ven 26/12/08, Mauro Condarelli <mcondarelli@soft-in.com> ha scritto:
>
>   
>> Da: Mauro Condarelli <mcondarelli@soft-in.com>
>> Oggetto: [Buildroot] AT91SAM9G20 build .config for linux-2.6.26
>> A: buildroot at uclibc.org
>> Data: Venerd? 26 dicembre 2008, 20:06
>> Hi,
>> I've been trying to build the whole kernel+rootfs
>> system for my
>> AT91SAM9G20-EK Rev.B EVA board several times now and always
>> failing, for
>> one reason or the other.
>>
>> I tried both the straight instructions from
>> buildroot.uclibc.org and
>> those from www.linux4sam.org.
>>
>> I have a working set bootstrap+uboot+linux-2.6.25+rootfs
>> BINARY ONLY!
>>
>> I am (for the time being) happy with the first two steps
>> and I'm trying
>> to setup a net boot with tftp+nfs.
>> I have been able to set-up a server with working tftpd+nfsd
>> that will
>> boot the original stuff.
>>
>>     
>
> The rootfs is one thing. The kernel is another one. You can compile
> the kernel outside the buildroot project using the same toolchain, start
> from the config file of 2.6.25 distribuition.
>
> Michael
>   
Pretty please, I tried several (dozens of) configurations.
Can  someone contribute a *surely working* .config file for my board?
I started "from the config file of 2.6.25 distribuition" (assuming You
mean the one that is available from www.kernel.org) multiple times,
never getting to a working kernel.

I really need to start from some "known good" point, otherwise I'm just
running circles.

TiA
Mauro