From mboxrd@z Thu Jan  1 00:00:00 1970
From: Ulf Samuelsson <ulf.samuelsson@atmel.com>
Date: Wed, 08 Apr 2009 17:56:21 +0200
Subject: [Buildroot] u-boot fails with custom board support
In-Reply-To: <49DCAFCE.4030001@cogeco.ca>
References: <49DCAFCE.4030001@cogeco.ca>
Message-ID: <49DCC925.7060706@atmel.com>
List-Id: <buildroot.busybox.net>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: buildroot@busybox.net

mike sander skrev:
> Hi All:
>
> I'm using buildroot-2009.02. I have a custom board based on atmel
> at91sam9g20. I have created a top level board config.
>
> I invoke make as follows:
>
> make BOARD=xx
>
The normal way of using buildroot is to do:

$ make at91sam9g20ek_defconfig
$ make

If you do any modifications to any the configs (busybox, linux, .config
etc.)
you can do:

$ make saveconfig

which will copy all your configs to $(LOCAL)/$(PROJECT)
It will also update the .config file so that it will use
your updated config files instead of the default.

You can then retrieve this by making:
$ make BOARD=<PROJECT> getconfig
I.E:
$ make BOARD=at91sam9g20-mike getconfig

which will fetch the new config file into the top directory of buildroot

You then type
$ make
to build the project


BR
Ulf Samuelsson


> u-boot is failing with the following messages (see below). I have
> specified "at91sam9g20ek" in the "board name" section for u-boot (same
> behaviour with default setting). It appears that u-boot does correctly
> do the at91sam9g20ek_config. I cannot see how/why make is looking for
> "Project Name" items under u-boot towards the end of the u-boot build.
> Manually building u-boot with "make at91sam9g20ek_config;make" works
> fine. Stock u-boot is perfectly acceptable.
>
> I've read the br docs. I did not see any indication that u-boot needs
> to be tailored when using custom board support. Any suggestions on how
> to force u-boot to build the stock config? I have tried latest br
> snapshot too. same behavior. I suspect I have missed something obvious.
>
>
>
> /usr/bin/make -C board/atmel/xx/
> make: Entering an unknown directory
> make: *** board/atmel/xx/: No such file or directory. Stop.
> make: Leaving an unknown directory
> make[1]: *** [board/atmel/xx/libxx.a] Error 2
> make[1]: Leaving directory
> `/home/br/buildroot/project_build_arm/xx/u-boot-2009.03'
> make: ***
> [/home/br/buildroot/project_build_arm/xx/u-boot-2009.03/u-boot.bin]
> Error 2
>
>
>
> thanks in advance,
>
> mike sander
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot