From mboxrd@z Thu Jan 1 00:00:00 1970 From: Gustavo Zacarias Date: Fri, 22 May 2009 12:58:49 -0300 Subject: [Buildroot] unrecognized option `-Qy' In-Reply-To: <20090522154000.07747478023@ws1-5.us4.outblaze.com> References: <20090522154000.07747478023@ws1-5.us4.outblaze.com> Message-ID: <4A16CBB9.2080806@zacarias.com.ar> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net George Matveev wrote: > Hi, > > got pretty much same result using buildroot-2009.05-rc2.tar.bz2: > > /home/work/buildrootgeo/build_arm/staging_dir/usr/bin/arm-linux-uclibcgnueabi-as: unrecognized option > `-Qy' > make[2]: *** [build/genmodes.o] Error 1 > make[2]: Leaving directory > `/home/work/buildrootgeo/toolchain_build_arm/gcc-4.3.2-initial/gcc' > make[1]: *** [all-gcc] Error 2 > make[1]: Leaving directory > `/home/work/buildrootgeo/toolchain_build_arm/gcc-4.3.2-initial' > make: *** > [/home/work/buildrootgeo/toolchain_build_arm/gcc-4.3.2-initial/.compiled] > Error 2 > geomat at fermat:/home/work/buildroot200905rc2$ > > Configuration file (also attached) is a bit different this time: > > BR2_GCC_TARGET_ARCH="armv4t" > > was correctly recognized and no manual intervention was needed. > > But still got this "unrecognized option `-Qy'" error. > This is simple busybox configuration done on Lenny. > > Could someone possibly share .config which resulted in successful build? > > Best regards, > George This is my custom config, target is a custom at91rm9200-based board (arm920t). I'm using some custom bits like a custom target skeleton/device and uclibc/busybox config though it shouldn't affect the result. I can send the extra config bits on a personal mail to you since there's nothing propietary about them, mostly to avoid cluttering the list. Regards. -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: myconfig URL: