From mboxrd@z Thu Jan  1 00:00:00 1970
From: Roman Chertov <rchertov@cs.ucsb.edu>
Date: Tue, 20 Oct 2009 09:42:38 -0700
Subject: [Buildroot] uClibc kernel headers problem
Message-ID: <4ADDE87E.1030601@cs.ucsb.edu>
List-Id: <buildroot.busybox.net>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: buildroot@busybox.net

Hello,

I am using the latest build root release and I am trying to build a tool
chain for CS-e9302 board which has an ARM chip.  I want to use the
2.6.24.7 Linux kernel (I patched it to support click modular router).  I
patched that kernel and u-boot 1.3.3 with patches from
http://dev.ivanov.eu/projects/cs-e9302/ to enable the board support.  I
then renamed the tar.bz2 files into file names that buildroot supports
in the menuconfig (linux-2.6.24.tar.bz2 kernel and
u-boot-2009.06.tar.bz2) and placed the files into the dl directory.

My current trouble is with uClibc 0.9.30.1.  In the buildroot menuconfig
I specified that I want to build the entire Linux kernel, so as far as I
understand there is no need to use the precompiled headers option.  When
I build the tool chain, it all works up to uClibc.  I get the following
error "cc1: error: unrecognized command line option "-mbig-endian"".  I
have included the output log down below.  I would appreciate any help
with this.

Thanks,

Roman

  Checking build system dependencies:
BUILDROOT_DL_DIR clean:                         Ok
CC clean:                                       Ok
CXX clean:                                      Ok
CPP clean:                                      Ok
CFLAGS clean:                                   Ok
INCLUDES clean:                                 Ok
CXXFLAGS clean:                                 Ok
which installed:                                Ok
sed works:                                      Ok (/bin/sed)
GNU make version '3.81':                        Ok
C compiler '/usr/lib/ccache/gcc'
C compiler version '4.4.1':                     Ok
C++ compiler '/usr/lib/ccache/g++'
C++ compiler version '4.4.1':                   Ok
awk installed:                                  Ok
bash installed:                                 Ok
bison installed:                                Ok
flex installed:                                 Ok
gettext installed:                              Ok
makeinfo installed:                             Ok
Build system dependencies:                      Ok

rm -rf
/proj/tools/buildroot-2009.08/project_build_arm/uclibc/buildroot-config
mkdir -p /proj/tools/buildroot-2009.08/project_build_arm/uclibc
cp -dpRf package/config/buildroot-config
/proj/tools/buildroot-2009.08/project_build_arm/uclibc/buildroot-config
/usr/bin/make -j1 -C
/proj/tools/buildroot-2009.08/toolchain_build_arm/uClibc-0.9.30.1 \
                PREFIX= \
                DEVEL_PREFIX=/ \
                RUNTIME_PREFIX=/ \
                HOSTCC="/usr/lib/ccache/gcc" \
                all
make[1]: Entering directory
`/proj/tools/buildroot-2009.08/toolchain_build_arm/uClibc-0.9.30.1'
  GEN include/bits/sysnum.h
cc1: error: unrecognized command line option "-mbig-endian"
cc1: error: unrecognized command line option "-mbig-endian"
ERROR: Could not generate syscalls.
Make sure that you have proper kernel headers.
Your .config in KERNEL_HEADERS="" was set to:
/usr/include/
make[1]: *** [include/bits/sysnum.h] Error 1
make[1]: Leaving directory
`/proj/tools/buildroot-2009.08/toolchain_build_arm/uClibc-0.9.30.1'
make: ***
[/proj/tools/buildroot-2009.08/toolchain_build_arm/uClibc-0.9.30.1/lib/libc.a]
Error 2