From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sebastian Date: Wed, 24 Mar 2010 16:55:33 +0100 Subject: [Buildroot] Xorg configuration for XGI chip In-Reply-To: <4BAA2D77.1050402@terawatt.fr> References: <4BA3A72B.3010009@terawatt.fr> <4BA3AAC2.9050400@gmail.com> <4BA8E694.3080809@terawatt.fr> <4BAA0988.9050708@arcor.de> <4BAA2D77.1050402@terawatt.fr> Message-ID: <4BAA35F5.7040607@arcor.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hallo, the video BIOS is not accessible for end-users, but you can try to boot the kernel with "vga=ask" and then use "scan". You'll get a list of video modes which are offered by your video BIOS. You need to configure the kernel to implement this feature; else you can use any configuration tool (i.e. use a normal linux distribution and then "hwinfo --framebuffer") to get the available video modes. The vesa driver should also output a list. The hsync and vsync parameters are used to specify the monitor's capabilities; if you use a DDC-compatible monitor, you shouldn't need them. Try without any options, maybe try with reading the webpage of the SiS-driver; i personally don't like the driver, but that was the system itself which was crap. You can always use a normal linux distribution on a PC, and configure it down to your needs. If it works there, you can check what might be different. The log itself looks as good as I can read it. Sorry if I can't help you any more than this... Best regards, Sebastian Damien Borie schrieb: > > Thank for your help. > I don't know how to access the video BIOS. I can only access Motherboard > BIOS and there is nothing into for video parameters. > > I use startx command to launch X server and my xinitrc is the default > one which launch twn, xclock and 3 xterm. When I use vesa, I can see > them. But, as I don't get any error, maybe the server is really running > and there is only a bad parameter or something like that. > My log file is a bit log, but here we go. The only thing strange is an > memory error when I interrupt (at the end). I don't know the cause, but > we think maybe we must set memory value for video somewhere. > Another theory : the hsync range and vrefresh range are default, and I > don't know how to find the good values. > > X.Org X Server 1.7.1 > Release Date: 2009-10-23 > X Protocol Version 11, Revision 0 > Build Operating System: Linux 2.6.25-2-686 i686 > Current Operating System: Linux matrix5 2.6.32 #1 PREEMPT Tue Mar 23 > 11:15:59 CET 2010 i586 > Kernel command line: root=/dev/hda2 vga=769 BOOT_IMAGE=bzImage > Build Date: 22 March 2010 05:55:06PM > > Current version of pixman: 0.17.4 > Before reporting problems, check http://wiki.x.org > to make sure that you have the latest version. > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/usr/var/log/Xorg.0.log", Time: Wed Mar 24 23:07:46 2010 > (==) Using config file: "/etc/X11/xorg.conf" > (==) ServerLayout "Simple Layout" > (**) |-->Screen "Screen0" (0) > (**) | |-->Monitor "Monitor XGI" > (==) No device specified for screen "Screen0". > Using the first device section listed. > (**) | |-->Device "Volari z9s" > (**) |-->Input Device "Mouse1" > (**) |-->Input Device "Keyboard1" > (==) Not automatically adding devices > (==) Not automatically enabling devices > (WW) The directory "/usr/lib/X11/fonts/misc/" does not exist. > Entry deleted from font path. > (WW) The directory "/usr/lib/X11/fonts/TTF/" does not exist. > Entry deleted from font path. > (WW) The directory "/usr/lib/X11/fonts/OTF" does not exist. > Entry deleted from font path. > (WW) The directory "/usr/lib/X11/fonts/Type1/" does not exist. > Entry deleted from font path. > (WW) The directory "/usr/lib/X11/fonts/100dpi/" does not exist. > Entry deleted from font path. > (WW) The directory "/usr/lib/X11/fonts/75dpi/" does not exist. > Entry deleted from font path. > (**) FontPath set to: > /usr/share/fonts/X11/misc/ > (==) ModulePath set to "/usr/lib/xorg/modules" > (II) Loader magic: 0x8196b60 > (II) Module ABI versions: > X.Org ANSI C Emulation: 0.4 > X.Org Video Driver: 6.0 > X.Org XInput driver : 7.0 > X.Org Server Extension : 2.0 > (--) using VT number 3 > > (--) PCI:*(0:0:3:0) 18ca:0020:18ca:0020 rev 0, Mem @ > 0xf8000000/67108864, 0xfefc0000/262144, I/O @ 0x0000df80/128 > (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) > (II) "extmod" will be loaded. This was enabled by default and also > specified in the config file. > (II) "dbe" will be loaded. This was enabled by default and also > specified in the config file. > (II) "glx" will be loaded by default. > (II) "dri" will be loaded by default. > (II) LoadModule: "dbe" > (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so > (II) Module dbe: vendor="X.Org Foundation" > compiled for 1.7.1, module version = 1.0.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension DOUBLE-BUFFER > (II) LoadModule: "extmod" > (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so > (II) Module extmod: vendor="X.Org Foundation" > compiled for 1.7.1, module version = 1.0.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension MIT-SCREEN-SAVER > (II) Loading extension XFree86-VidModeExtension > (II) Loading extension DPMS > (II) Loading extension XVideo > (II) Loading extension XVideo-MotionCompensation > (II) Loading extension X-Resource > (II) LoadModule: "extmod" > (II) Reloading /usr/lib/xorg/modules/extensions/libextmod.so > (II) Loading extension MIT-SCREEN-SAVER > (II) Loading extension XFree86-VidModeExtension > (II) Loading extension XFree86-DGA > (II) Loading extension DPMS > (II) Loading extension XVideo > (II) Loading extension XVideo-MotionCompensation > (II) Loading extension X-Resource > (II) LoadModule: "glx" > (II) Loading /usr/lib/xorg/modules/extensions/libglx.so > (II) Module glx: vendor="X.Org Foundation" > compiled for 1.7.1, module version = 1.0.0 > ABI class: X.Org Server Extension, version 2.0 > (==) AIGLX enabled > (II) Loading extension GLX > (II) LoadModule: "dri" > (II) Loading /usr/lib/xorg/modules/extensions/libdri.so > (II) Module dri: vendor="X.Org Foundation" > compiled for 1.7.1, module version = 1.0.0 > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension XFree86-DRI > (II) LoadModule: "sis" > (II) Loading /usr/lib/xorg/modules/drivers/sis_drv.so > (II) Module sis: vendor="X.Org Foundation" > compiled for 1.7.1, module version = 0.10.2 > Module class: X.Org Video Driver > ABI class: X.Org Video Driver, version 6.0 > (II) LoadModule: "mouse" > (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so > (II) Module mouse: vendor="X.Org Foundation" > compiled for 1.7.1, module version = 1.5.0 > Module class: X.Org XInput Driver > ABI class: X.Org XInput driver, version 7.0 > (II) LoadModule: "kbd" > (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so > (II) Module kbd: vendor="X.Org Foundation" > compiled for 1.7.1, module version = 1.4.0 > Module class: X.Org XInput Driver > ABI class: X.Org XInput driver, version 7.0 > (II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620, > SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H, > SIS315PRO/E, SIS550, SIS650/M650/651/740, SIS330(Xabre), > SIS660/[M]661[F|M]X/[M]670/[M]741[GX]/[M]760[GX]/[M]761[GX]/[M]770[GX], > SIS340 > (II) SIS: driver for XGI chipsets: Volari Z7 (XG20), > Volari V3XT/V5/V8/Duo (XG40) > (II) Primary Device is: PCI 00 at 00:03:0 > (WW) Falling back to old probe method for sis > (--) Chipset Volari Z7 (XG20) found > (II) SIS(0): SiS driver (2005/09/20-1, compiled for X.org 1.7.1.0) > (II) SIS(0): Copyright (C) 2001-2005 Thomas Winischhofer > and others > (II) SIS(0): *** See http://www.winischhofer.at/linuxsisvga.shtml > (II) SIS(0): *** for documentation and updates. > (--) SIS(0): sisfb not found > (--) SIS(0): Relocated I/O registers at 0xDF80 > (WW) System lacks support for changing MTRRs > (II) Loading sub module "ramdac" > (II) LoadModule: "ramdac" > (II) Module "ramdac" already built-in > (**) SIS(0): Depth 8, (--) framebuffer bpp 8 > (==) SIS(0): Default visual is PseudoColor > (--) SIS(0): Video BIOS version "1.09.05" found (XGI data layout) > (**) SIS(0): Option "DRI" "off" > (**) SIS(0): Option "BenchmarkMemcpy" "no" > (**) SIS(0): Option "UseSSE" "on" > (==) SIS(0): Using XAA acceleration architecture > (==) SIS(0): Using HW cursor > (II) SIS(0): Using VRAM command queue, size 128k > (==) SIS(0): Hotkey display switching is enabled > (==) SIS(0): SiSCtrl utility interface is disabled > (II) SIS(0): For information on SiSCtrl, see > http://www.winischhofer.at/linuxsispart1.shtml#sisctrl > (**) SIS(0): Will not benchmark methods for system RAM to video RAM > transfers > (**) SIS(0): Will eventually use SSE CPU instructions > (**) SIS(0): DRI disabled > (--) SIS(0): DRAM type: Single channel DDR2x SDRAM > (--) SIS(0): Memory clock: 248.178 MHz > (--) SIS(0): DRAM bus width: 16 bit > (--) SIS(0): Linear framebuffer at 0xF8000000 > (--) SIS(0): MMIO registers at 0xFEFC0000 (size 64K) > (--) SIS(0): VideoRAM: 32768 KB > (II) SIS(0): Using 32608K of framebuffer memory at offset 0K > (==) SIS(0): Using gamma correction (1.0, 1.0, 1.0) > (II) SIS(0): Gamma correction is enabled > (--) SIS(0): Memory bandwidth at 8 bpp is 496.356 MHz > (II) Loading sub module "ddc" > (II) LoadModule: "ddc" > (II) Module "ddc" already built-in > (--) SIS(0): CRT1 DDC probing failed > (II) Loading sub module "ddc" > (II) LoadModule: "ddc" > (II) Module "ddc" already built-in > (II) Loading sub module "vbe" > (II) LoadModule: "vbe" > (II) Loading /usr/lib/xorg/modules/libvbe.so > (II) Module vbe: vendor="X.Org Foundation" > compiled for 1.7.1, module version = 1.1.0 > ABI class: X.Org Video Driver, version 6.0 > (II) Loading sub module "int10" > (II) LoadModule: "int10" > (II) Loading /usr/lib/xorg/modules/libint10.so > (II) Module int10: vendor="X.Org Foundation" > compiled for 1.7.1, module version = 1.0.0 > ABI class: X.Org Video Driver, version 6.0 > (II) SIS(0): initializing int10 > (II) SIS(0): Primary V_BIOS segment is: 0xc000 > (II) SIS(0): VESA BIOS detected > (II) SIS(0): VESA VBE Version 3.0 > (II) SIS(0): VESA VBE Total Mem: 32768 kB > (II) SIS(0): VESA VBE OEM: XGI > (II) SIS(0): VESA VBE OEM Software Rev: 1.0 > (II) SIS(0): VESA VBE OEM Vendor: XGI Technology, Inc. > (II) SIS(0): VESA VBE OEM Product: Volari Z9s > (II) SIS(0): VESA VBE OEM Product Rev: 1.09.05 > (II) Loading sub module "ddc" > (II) LoadModule: "ddc" > (II) Module "ddc" already built-in > (II) SIS(0): VESA VBE DDC supported > (II) SIS(0): VESA VBE DDC Level none > (II) SIS(0): VESA VBE DDC transfer in appr. 0 sec. > (II) SIS(0): VESA VBE DDC read failed > (==) SIS(0): Min pixel clock is 10 MHz > (--) SIS(0): Max pixel clock is 166 MHz > (II) SIS(0): Replaced entire mode list with built-in modes > (II) SIS(0): Using real widescreen modes for CRT1 VGA devices > (II) SIS(0): Use option "ForceCRT1VGAAspect" to overrule > (II) SIS(0): "Unknown reason" in the following list means that the mode > (II) SIS(0): is not supported on the chipset/bridge/current output device. > (II) SIS(0): Monitor XGI: Using default hsync range of 31.50-37.90 kHz > (II) SIS(0): Monitor XGI: Using default vrefresh range of 50.00-70.00 Hz > (II) SIS(0): Clock range: 10.00 to 166.00 MHz > (II) SIS(0): Not using default mode "800x600" (hsync out of range) > (II) SIS(0): Not using default mode "800x600" (hsync out of range) > (II) SIS(0): Not using default mode "800x600" (hsync out of range) > (II) SIS(0): Not using default mode "800x600" (hsync out of range) > (II) SIS(0): Not using default mode "800x600" (hsync out of range) > (II) SIS(0): Not using default mode "800x600" (hsync out of range) > (II) SIS(0): Not using default mode "640x480" (vrefresh out of range) > (II) SIS(0): Not using default mode "640x480" (vrefresh out of range) > (II) SIS(0): Not using default mode "640x480" (hsync out of range) > (II) SIS(0): Not using default mode "640x480" (hsync out of range) > (II) SIS(0): Not using default mode "640x480" (hsync out of range) > (II) SIS(0): Not using default mode "640x480" (hsync out of range) > (II) SIS(0): Not using default mode "640x480" (hsync out of range) > (II) SIS(0): Not using default mode "640x400" (vrefresh out of range) > (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range) > (II) SIS(0): Not using default mode "1024x768" (hsync out of range) > (II) SIS(0): Not using default mode "1024x768" (hsync out of range) > (II) SIS(0): Not using default mode "1024x768" (hsync out of range) > (II) SIS(0): Not using default mode "1024x768" (hsync out of range) > (II) SIS(0): Not using default mode "1024x768" (hsync out of range) > (II) SIS(0): Not using default mode "1024x768" (hsync out of range) > (II) SIS(0): Not using default mode "1280x1024" (hsync out of range) > (II) SIS(0): Not using default mode "1280x1024" (hsync out of range) > (II) SIS(0): Not using default mode "1280x1024" (hsync out of range) > (II) SIS(0): Not using default mode "1280x1024" (hsync out of range) > (II) SIS(0): Not using default mode "1600x1200" (hsync out of range) > (II) SIS(0): Not using default mode "1600x1200" (bad mode > clock/interlace/doublescan) > (II) SIS(0): Not using default mode "1600x1200" (bad mode > clock/interlace/doublescan) > (II) SIS(0): Not using default mode "1600x1200" (bad mode > clock/interlace/doublescan) > (II) SIS(0): Not using default mode "1600x1200" (bad mode > clock/interlace/doublescan) > (II) SIS(0): Not using default mode "1600x1200" (bad mode > clock/interlace/doublescan) > (II) SIS(0): Not using default mode "1600x1200" (bad mode > clock/interlace/doublescan) > (II) SIS(0): Not using default mode "320x200" (vrefresh out of range) > (II) SIS(0): Not using default mode "512x384" (hsync out of range) > (II) SIS(0): Not using default mode "1920x1440" (bad mode > clock/interlace/doublescan) > (II) SIS(0): Not using default mode "1920x1440" (bad mode > clock/interlace/doublescan) > (II) SIS(0): Not using default mode "1920x1440" (bad mode > clock/interlace/doublescan) > (II) SIS(0): Not using default mode "1920x1440" (bad mode > clock/interlace/doublescan) > (II) SIS(0): Not using default mode "1920x1440" (bad mode > clock/interlace/doublescan) > (II) SIS(0): Not using default mode "1920x1440" (bad mode > clock/interlace/doublescan) > (II) SIS(0): Not using default mode "2048x1536" (bad mode > clock/interlace/doublescan) > (II) SIS(0): Not using default mode "2048x1536" (bad mode > clock/interlace/doublescan) > (II) SIS(0): Not using default mode "2048x1536" (bad mode > clock/interlace/doublescan) > (II) SIS(0): Not using default mode "2048x1536" (bad mode > clock/interlace/doublescan) > (II) SIS(0): Not using default mode "2048x1536" (bad mode > clock/interlace/doublescan) > (II) SIS(0): Not using default mode "800x480" (hsync out of range) > (II) SIS(0): Not using default mode "800x480" (hsync out of range) > (II) SIS(0): Not using default mode "1024x576" (hsync out of range) > (II) SIS(0): Not using default mode "1024x576" (hsync out of range) > (II) SIS(0): Not using default mode "1024x576" (hsync out of range) > (II) SIS(0): Not using default mode "1280x720" (hsync out of range) > (II) SIS(0): Not using default mode "1280x720" (hsync out of range) > (II) SIS(0): Not using default mode "1280x720" (hsync out of range) > (II) SIS(0): Not using default mode "1280x960" (hsync out of range) > (II) SIS(0): Not using default mode "1280x960" (hsync out of range) > (II) SIS(0): Not using default mode "1280x768" (hsync out of range) > (II) SIS(0): Not using default mode "1280x768" (hsync out of range) > (II) SIS(0): Not using default mode "1280x768" (hsync out of range) > (II) SIS(0): Not using default mode "1400x1050" (hsync out of range) > (II) SIS(0): Not using default mode "1400x1050" (hsync out of range) > (II) SIS(0): Not using default mode "1152x864" (hsync out of range) > (II) SIS(0): Not using default mode "1152x864" (hsync out of range) > (II) SIS(0): Not using default mode "1152x864" (hsync out of range) > (II) SIS(0): Not using default mode "848x480" (hsync out of range) > (II) SIS(0): Not using default mode "848x480" (hsync out of range) > (II) SIS(0): Not using default mode "856x480" (hsync out of range) > (II) SIS(0): Not using default mode "1360x768" (hsync out of range) > (II) SIS(0): Not using default mode "1280x800" (hsync out of range) > (II) SIS(0): Not using default mode "1280x800" (hsync out of range) > (II) SIS(0): Not using default mode "1280x800" (hsync out of range) > (II) SIS(0): Not using default mode "1680x1050" (hsync out of range) > (II) SIS(0): Not using default mode "1280x854" (hsync out of range) > (II) SIS(0): Not using default mode "1280x854" (hsync out of range) > (II) SIS(0): Not using default mode "1280x854" (hsync out of range) > (II) SIS(0): Not using default mode "960x600" (width too large for > virtual size) > (II) SIS(0): Not using default mode "960x540" (width too large for > virtual size) > (II) SIS(0): Not using default mode "856x480" (width too large for > virtual size) > (--) SIS(0): Virtual size is 800x600 (pitch 800) > (**) SIS(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz > (II) SIS(0): Modeline "800x600"x60.3 39.97 800 840 968 1056 600 601 > 605 628 +hsync +vsync (37.9 kHz) > (**) SIS(0): Default mode "800x600": 36.1 MHz, 35.2 kHz, 56.3 Hz > (II) SIS(0): Modeline "800x600"x56.3 36.06 800 824 896 1024 600 601 > 603 625 +hsync +vsync (35.2 kHz) > (**) SIS(0): Default mode "768x576": 35.0 MHz, 35.9 kHz, 60.1 Hz > (II) SIS(0): Modeline "768x576"x60.1 35.00 768 792 872 976 576 578 > 581 597 +hsync +vsync (35.9 kHz) > (**) SIS(0): Default mode "720x576": 32.7 MHz, 35.9 kHz, 60.1 Hz > (II) SIS(0): Modeline "720x576"x60.1 32.73 720 744 816 912 576 578 > 581 597 +hsync +vsync (35.9 kHz) > (**) SIS(0): Default mode "800x480": 39.8 MHz, 37.7 kHz, 60.0 Hz > (II) SIS(0): Modeline "800x480"x60.0 39.77 800 840 968 1056 480 552 > 556 628 +hsync +vsync (37.7 kHz) > (**) SIS(0): Default mode "720x480": 28.3 MHz, 31.6 kHz, 61.0 Hz > (II) SIS(0): Modeline "720x480"x61.0 28.28 720 728 840 896 480 490 > 492 517 -hsync -vsync (31.6 kHz) > (**) SIS(0): Default mode "640x480": 25.1 MHz, 31.3 kHz, 59.7 Hz > (II) SIS(0): Modeline "640x480"x59.7 25.06 640 656 752 800 480 490 > 492 525 -hsync -vsync (31.3 kHz) > (**) SIS(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D) > (II) SIS(0): Modeline "400x300"x60.3 19.98 400 416 480 528 300 300 > 302 314 doublescan +hsync +vsync (37.9 kHz) > (**) SIS(0): Default mode "320x240": 12.5 MHz, 31.3 kHz, 60.7 Hz (D) > (II) SIS(0): Modeline "320x240"x60.7 12.53 320 328 376 400 240 245 > 246 258 doublescan -hsync -vsync (31.3 kHz) > (==) SIS(0): DPI set to (96, 96) > (II) Loading sub module "fb" > (II) LoadModule: "fb" > (II) Loading /usr/lib/xorg/modules/libfb.so > (II) Module fb: vendor="X.Org Foundation" > compiled for 1.7.1, module version = 1.0.0 > ABI class: X.Org ANSI C Emulation, version 0.4 > (II) Loading sub module "xaa" > (II) LoadModule: "xaa" > (II) Loading /usr/lib/xorg/modules/libxaa.so > (II) Module xaa: vendor="X.Org Foundation" > compiled for 1.7.1, module version = 1.2.1 > ABI class: X.Org Video Driver, version 6.0 > (II) SIS(0): 2D acceleration enabled > (II) Loading sub module "vbe" > (II) LoadModule: "vbe" > (II) Reloading /usr/lib/xorg/modules/libvbe.so > (II) Loading sub module "int10" > (II) LoadModule: "int10" > (II) Reloading /usr/lib/xorg/modules/libint10.so > (II) SIS(0): initializing int10 > (II) SIS(0): Primary V_BIOS segment is: 0xc000 > (II) SIS(0): VESA BIOS detected > (II) SIS(0): VESA VBE Version 3.0 > (II) SIS(0): VESA VBE Total Mem: 32768 kB > (II) SIS(0): VESA VBE OEM: XGI > (II) SIS(0): VESA VBE OEM Software Rev: 1.0 > (II) SIS(0): VESA VBE OEM Vendor: XGI Technology, Inc. > (II) SIS(0): VESA VBE OEM Product: Volari Z9s > (II) SIS(0): VESA VBE OEM Product Rev: 1.09.05 > (II) SIS(0): Setting standard mode 0x30 > (II) SIS(0): Framebuffer from (0,0) to (799,32766) > (II) SIS(0): Using XFree86 Acceleration Architecture (XAA) > Screen to screen bit blits > Solid filled rectangles > 8x8 mono pattern filled rectangles > 8x8 color pattern filled rectangles > Solid Lines > Dashed Lines > Setting up tile and stipple cache: > 32 128x128 slots > 32 256x256 slots > 16 512x512 slots > 32 8x8 color pattern slots > (==) SIS(0): Backing store disabled > (==) SIS(0): Silken mouse enabled > (==) SIS(0): DPMS enabled > (II) SIS(0): Initialized SISCTRL extension version 0.1 > (II) SIS(0): Registered screen 0 with SISCTRL extension version 0.1 > (==) RandR enabled > (II) Initializing built-in extension Generic Event Extension > (II) Initializing built-in extension SHAPE > (II) Initializing built-in extension MIT-SHM > (II) Initializing built-in extension XInputExtension > (II) Initializing built-in extension XTEST > (II) Initializing built-in extension BIG-REQUESTS > (II) Initializing built-in extension SYNC > (II) Initializing built-in extension XKEYBOARD > (II) Initializing built-in extension XC-MISC > (II) Initializing built-in extension XINERAMA > (II) Initializing built-in extension XFIXES > (II) Initializing built-in extension RENDER > (II) Initializing built-in extension RANDR > (II) Initializing built-in extension COMPOSITE > (II) Initializing built-in extension DAMAGE > (EE) AIGLX error: dlopen of /usr/lib/dri/swrast_dri.so failed > (/usr/lib/dri/swrast_dri.so: cannot open shared object file: No such > file or directory) > (EE) GLX: could not load software renderer > (II) GLX: no usable GL providers found for screen 0 > (**) Option "Protocol" "auto" > (**) Option "Device" "/dev/event2" > (II) Mouse1: Setting mouse protocol to "PS/2" > (**) Mouse1: Device: "/dev/event2" > (**) Mouse1: Protocol: "auto" > (**) Option "CorePointer" > (**) Mouse1: always reports core events > (**) Option "Device" "/dev/event2" > (**) Option "Emulate3Buttons" "false" > (**) Option "ZAxisMapping" "4 5 6 7" > (**) Mouse1: ZAxisMapping: buttons 4, 5, 6 and 7 > (**) Mouse1: Buttons: 11 > (**) Mouse1: Sensitivity: 1 > (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE) > (**) Mouse1: (accel) keeping acceleration scheme 1 > (**) Mouse1: (accel) acceleration profile 0 > (II) Mouse1: Setting mouse protocol to "PS/2" > (**) Option "CoreKeyboard" > (**) Keyboard1: always reports core events > (**) Option "Protocol" "standard" > (**) Keyboard1: Protocol: standard > (**) Option "XkbRules" "base" > (**) Keyboard1: XkbRules: "base" > (**) Option "XkbModel" "pc105" > (**) Keyboard1: XkbModel: "pc105" > (**) Option "XkbLayout" "fr" > (**) Keyboard1: XkbLayout: "fr" > (**) Option "XkbVariant" "nodeadkeys" > (**) Keyboard1: XkbVariant: "nodeadkeys" > (**) Option "CustomKeycodes" "off" > (**) Keyboard1: CustomKeycodes disabled > (II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD) > (II) UnloadModule: "mouse" > (II) UnloadModule: "kbd" > (II) SIS(0): Restoring by setting old mode 0x2e > (WW) SIS(0): xf86UnMapVidMem: cannot find region for [0xb7137000,0x10000] > (WW) SIS(0): xf86UnMapVidMem: cannot find region for [0xb5137000,0x2000000] > > Thanks, > Damien.