From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ossy Date: Sun, 09 May 2010 22:18:39 +0200 Subject: [Buildroot] u-boot failed for arm926t using the rc1 plus patches until May 8th Message-ID: <4BE7189F.9000500@gmx.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Dear buildroot mailinglist, I tried to use th U-Boot integration of buildroot, but it failed with the following out put: "...no rule to make target integrator926_config. Stop..." ... --sysroot=/home/ossy/buildroot/buildroot-dev/output/staging/" \ \ /usr/bin/make -j1 -C /home/ossy/buildroot/buildroot-dev/output/build/u-boot-2010.03 \ integrator926_config make[1]: Entering directory `/home/ossy/buildroot/buildroot-dev/output/build/u-boot-2010.03' make[1]: *** Keine Regel, um ??integrator926_config?? zu erstellen. Schluss. make[1]: Leaving directory `/home/ossy/buildroot/buildroot-dev/output/build/u-boot-2010.03' make: *** [/home/ossy/buildroot/buildroot-dev/output/build/u-boot-2010.03/.configured] Fehler 2 ... Please find attached my configuration. I am using an amd64 host with lenny to compile for target arm. I skipped the compilation of u-boot and used an external one. Kind regards, Marcus -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: uboot-failed.txt URL: -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: buildroot.config URL: