From: Marcus Osdoba <marcus.osdoba@googlemail.com>
To: buildroot@busybox.net
Subject: [Buildroot] uImage build error
Date: Wed, 25 Aug 2010 23:54:03 +0200 [thread overview]
Message-ID: <4C7590FB.1000700@googlemail.com> (raw)
In-Reply-To: <C43529A246480145B0A6D0234BDB0F0D481DAC@MELANITE.micrel.com>
Am 25.08.2010 23:41, schrieb Choi, David:
>
> Hi all,
>
> I am new to buildroot. The version that I use is v2010.05(stable version)
>
> As you see the attached, I almost the default value except mips(little
> endian mode).
>
> My Linux version is 2.6.33.5(default version) and configuration is
> tb0229_defconfig.
>
> Whenever I have tried to build uImage, I have gotten an error message
> saying "make[1]: *** No rule to make target `uImage`. Stop.
>
> (Even though I have tried with v2010.08(rc1), I had the same error
> message)
>
Hi,
Make sure to run 2010.08(rc1) or higher (there were some patches in the
past concerning kernel image building). Please activate the U-Boot
bootloader. This should compile a mkimage which will be needed for
creating an uImage.
>make menuconfig (activate u-boot and/or kernel building if you want this)
>make
( Are you trying to run make uImage after deflating? This is not the
linux kernel. Buildroot is an independant project.
Please read docu page first:
http://buildroot.uclibc.org/downloads/buildroot.html )
Regards,
Marcus
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20100825/1925be16/attachment.html>
next prev parent reply other threads:[~2010-08-25 21:54 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-25 21:41 [Buildroot] uImage build error Choi, David
2010-08-25 21:54 ` Marcus Osdoba [this message]
2010-08-27 0:26 ` Choi, David
2010-08-27 8:01 ` Thomas Petazzoni
2010-08-27 14:40 ` Choi, David
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C7590FB.1000700@googlemail.com \
--to=marcus.osdoba@googlemail.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox