From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marc Leclerc Date: Mon, 19 Sep 2011 17:31:53 -0400 Subject: [Buildroot] Toolchain generate invalid executable format In-Reply-To: References: <4E7266AA.1000103@signaturealpha.com> <4E732E0F.6070709@signaturealpha.com> <4E73B2A8.4030507@signaturealpha.com> Message-ID: <4E77B4C9.5000302@signaturealpha.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hi, first thanks for your time, appreciated. I was under the impression that the environement (target) was built using the downloaded toolchain and assuming this, shouldn't the applications built with the toolchain have problem as well. I have tried loading the application with gdb which tell me the file is invalid format. The target is a Vortex86DX and has a floating point unit. Both executable also runs on my host (i5) The only difference in gcc -v output are paths and gcc version (4.3.5 vs 4.3.6) and --disable-libomp Does any of this makes sence? Regards Marc On 2011-09-17 07:12, Thomas De Schampheleire wrote: > Hi, > > On Fri, Sep 16, 2011 at 10:33 PM, Marc Leclerc > wrote: >> If it may help here is the -v output of the gcc compiler and output from >> compiling my app >> >> Thanks > At least on my host, both apps you sent run fine. The 'file' command > also shows that both apps are built for i486 (I was thinking you had a > binary for the wrong architecture). > > If you get a specific invalid instruction exception, you should try to > figure out which instruction it is. An example could be that your new > app is compiled with hardware-floating point instructions, while your > processor doesn't have such floating point unit. > > It's a good idea to compare the output you gave below for both your > toolchains, and see if there is a difference... > > Thomas > >> >> marc at Vostro-Linux:~/Smartlinks/DNP3/sa_DNP3$ i486-linux-gcc -v >> Using built-in specs. >> Target: i486-unknown-linux-uclibc >> Configured with: /home/marc/buildroot/output/toolchain/gcc-4.3.6/configure >> --prefix=/home/marc/buildroot/output/host/usr --build=i686-pc-linux-gnu >> --host=i686-pc-linux-gnu --target=i486-unknown-linux-uclibc >> --enable-languages=c >> --with-sysroot=/home/marc/buildroot/output/host/usr/i486-unknown-linux-uclibc/sysroot >> --with-build-time-tools=/home/marc/buildroot/output/host/usr/i486-unknown-linux-uclibc/bin >> --disable-__cxa_atexit --enable-target-optspace --disable-libgomp >> --with-gnu-ld --disable-libssp --disable-multilib --disable-tls >> --disable-shared --with-gmp=/home/marc/buildroot/output/host/usr >> --with-mpfr=/home/marc/buildroot/output/host/usr --enable-threads >> --disable-decimal-float --with-arch=i486 --with-tune=i486 >> --with-pkgversion='Buildroot 2011.08' >> --with-bugurl=http://bugs.buildroot.net/ >> Thread model: posix >> gcc version 4.3.6 (Buildroot 2011.08) >> marc at Vostro-Linux:~/Smartlinks/DNP3/sa_DNP3$ make >> i486-linux-gcc -c -g -I ../ -I ../../sa_shared/ -DTMW_LINUX_TARGET -DSA_DNP3 >> \ >> -oobj_gcc/sa_DNP3.o \ >> sa_DNP3.c >> i486-linux-gcc -c -g -I ../ -I ../../sa_shared/ -DTMW_LINUX_TARGET >> -DSA_DNP3 \ >> \ >> -oobj_gcc/vdx_gpio.o \ >> ../../sa_shared/vdx_gpio.c >> i486-linux-gcc -c -g -I ../ -I ../../sa_shared/ -DTMW_LINUX_TARGET >> -DSA_DNP3 \ >> \ >> -oobj_gcc/vdx_isaio.o \ >> ../../sa_shared/vdx_isaio.c >> i486-linux-gcc -c -g -I ../ -I ../../sa_shared/ -DTMW_LINUX_TARGET >> -DSA_DNP3 \ >> \ >> -oobj_gcc/sa_simulate.o \ >> ../../sa_shared/sa_simulate.c >> i486-linux-gcc -c -g -I ../ -I ../../sa_shared/ -DTMW_LINUX_TARGET >> -DSA_DNP3 \ >> \ >> -oobj_gcc/sa_comtrade.o \ >> ../../sa_shared/sa_comtrade.c >> i486-linux-gcc -c -g -I ../ -I ../../sa_shared/ -DTMW_LINUX_TARGET >> -DSA_DNP3 \ >> \ >> -oobj_gcc/sa_calculation.o \ >> ../../sa_shared/sa_calculation.c >> i486-linux-gcc -c -g -I ../ -I ../../sa_shared/ -DTMW_LINUX_TARGET >> -DSA_DNP3 \ >> \ >> -oobj_gcc/sa_config.o \ >> ../../sa_shared/sa_config.c >> i486-linux-gcc -g -static -o ../bin/sa_DNP3 \ >> obj_gcc/sa_DNP3.o \ >> obj_gcc/vdx_gpio.o \ >> obj_gcc/vdx_isaio.o \ >> obj_gcc/sa_simulate.o \ >> obj_gcc/sa_comtrade.o \ >> obj_gcc/sa_calculation.o \ >> obj_gcc/sa_config.o \ >> ../tmwscl/dnp.lib ../tmwscl/utils.lib ../liniotarg.lib -lpthread >> >> >> >> On 2011-09-16 07:07, Marc Leclerc wrote: >>> Hi, >>> >>> BR2_i386=y >>> BR2_x86_i486=y >>> >>> >>> BR2_GCC_TARGET_TUNE="i486" >>> BR2_GCC_TARGET_ARCH="i486" >>> >>> Thanks >>> >>> On 2011-09-16 01:36, Thomas De Schampheleire wrote: >>>> Hi, >>>> >>>> On Thu, Sep 15, 2011 at 10:57 PM, Marc Leclerc >>>> wrote: >>>>> Hi, >>>>> >>>>> Finally got a working environment after going back to the version of >>>>> tools I >>>>> had on my previous setup beside the kernel (now 3.0.4) >>>>> >>>>> One big problem though when I compile my application from my workstation >>>>> using the buildroot toolchain it no longer runs on my target leaving an >>>>> illegal instruction message. gdb (6.8) say the file format is not >>>>> recognized. if i take the same app compiled with my previous setup it >>>>> runs >>>>> fine (no changes have been made to the source, only had to change the >>>>> PATH >>>>> (to the compiler) since it changed from the buildroot version I was >>>>> using. >>>> What architecture is your target? >>>> What is the output of 'file' ? >>>> >>>>> Here is my buildroot .config, hopefully this is only caused by a change >>>>> in >>>>> default configuration >>>>> >>>>> Thanks >>>>> >>>>> # >>>>> # Automatically generated make config: don't edit >>>>> # Buildroot 2011.08 Configuration >>>>> # Thu Sep 15 14:57:25 2011 >>>>> # >>>>> BR2_HAVE_DOT_CONFIG=y >>>>> # BR2_arm is not set >>>>> # BR2_armeb is not set >>>>> # BR2_avr32 is not set >>>>> # BR2_bfin is not set >>>>> BR2_i386=y >>>>> # BR2_mips is not set >>>>> # BR2_mipsel is not set >>>>> # BR2_powerpc is not set >>>>> # BR2_sh is not set >>>>> # BR2_sh64 is not set >>>>> # BR2_sparc is not set >>>>> # BR2_x86_64 is not set >>>>> # BR2_xtensa is not set >>>>> # BR2_x86_i386 is not set >>>>> BR2_x86_i486=y >>>>> # BR2_x86_i586 is not set >>>>> # BR2_x86_i686 is not set >>>>> # BR2_x86_pentiumpro is not set >>>>> # BR2_x86_pentium_mmx is not set >>>>> # BR2_x86_pentium_m is not set >>>>> # BR2_x86_pentium2 is not set >>>>> # BR2_x86_pentium3 is not set >>>>> # BR2_x86_pentium4 is not set >>>>> # BR2_x86_prescott is not set >>>>> # BR2_x86_nocona is not set >>>>> # BR2_x86_core2 is not set >>>>> # BR2_x86_k6 is not set >>>>> # BR2_x86_k6_2 is not set >>>>> # BR2_x86_athlon is not set >>>>> # BR2_x86_athlon_4 is not set >>>>> # BR2_x86_opteron is not set >>>>> # BR2_x86_opteron_sse3 is not set >>>>> # BR2_x86_barcelona is not set >>>>> # BR2_x86_geode is not set >>>>> # BR2_x86_c3 is not set >>>>> # BR2_x86_c32 is not set >>>>> # BR2_x86_winchip_c6 is not set >>>>> # BR2_x86_winchip2 is not set >>>>> BR2_ARCH="i486" >>>>> BR2_ENDIAN="LITTLE" >>>>> BR2_GCC_TARGET_TUNE="i486" >>>>> BR2_GCC_TARGET_ARCH="i486" >>>>> >>>>> # >>>>> # Build options >>>>> # >>>>> >>>>> # >>>>> # Commands >>>>> # >>>>> BR2_WGET="wget --passive-ftp -nd -t 3" >>>>> BR2_SVN="svn" >>>>> BR2_BZR="bzr" >>>>> BR2_GIT="git" >>>>> BR2_ZCAT="gzip -d -c" >>>>> BR2_BZCAT="bzcat" >>>>> BR2_XZCAT="xzcat" >>>>> BR2_TAR_OPTIONS="" >>>>> BR2_DL_DIR="$(TOPDIR)/dl" >>>>> BR2_HOST_DIR="$(BASE_DIR)/host" >>>>> >>>>> # >>>>> # Mirrors and Download locations >>>>> # >>>>> BR2_PRIMARY_SITE="" >>>>> BR2_BACKUP_SITE="http://sources.buildroot.net/" >>>>> BR2_SOURCEFORGE_MIRROR="kent" >>>>> BR2_KERNEL_MIRROR="http://www.kernel.org/pub/" >>>>> BR2_GNU_MIRROR="http://ftp.gnu.org/pub/gnu" >>>>> BR2_DEBIAN_MIRROR="http://ftp.debian.org" >>>>> BR2_JLEVEL=2 >>>>> # BR2_CCACHE is not set >>>>> # BR2_DEPRECATED is not set >>>>> # BR2_ENABLE_DEBUG is not set >>>>> BR2_STRIP_strip=y >>>>> # BR2_STRIP_sstrip is not set >>>>> # BR2_STRIP_none is not set >>>>> # BR2_OPTIMIZE_0 is not set >>>>> # BR2_OPTIMIZE_1 is not set >>>>> # BR2_OPTIMIZE_2 is not set >>>>> # BR2_OPTIMIZE_3 is not set >>>>> BR2_OPTIMIZE_S=y >>>>> # BR2_PREFER_STATIC_LIB is not set >>>>> # BR2_HAVE_DOCUMENTATION is not set >>>>> # BR2_HAVE_DEVFILES is not set >>>>> >>>>> # >>>>> # Toolchain >>>>> # >>>>> BR2_TOOLCHAIN_BUILDROOT=y >>>>> # BR2_TOOLCHAIN_EXTERNAL is not set >>>>> # BR2_TOOLCHAIN_CTNG is not set >>>>> >>>>> # >>>>> # Kernel Header Options >>>>> # >>>>> # BR2_KERNEL_HEADERS_2_6_35 is not set >>>>> # BR2_KERNEL_HEADERS_2_6_36 is not set >>>>> # BR2_KERNEL_HEADERS_2_6_37 is not set >>>>> # BR2_KERNEL_HEADERS_2_6_38 is not set >>>>> # BR2_KERNEL_HEADERS_2_6_39 is not set >>>>> BR2_KERNEL_HEADERS_3_0=y >>>>> # BR2_KERNEL_HEADERS_VERSION is not set >>>>> # BR2_KERNEL_HEADERS_SNAP is not set >>>>> BR2_DEFAULT_KERNEL_HEADERS="3.0.4" >>>>> >>>>> # >>>>> # uClibc Options >>>>> # >>>>> # BR2_UCLIBC_VERSION_0_9_31 is not set >>>>> BR2_UCLIBC_VERSION_0_9_32=y >>>>> # BR2_UCLIBC_VERSION_SNAPSHOT is not set >>>>> BR2_UCLIBC_VERSION_STRING="0.9.32" >>>>> BR2_UCLIBC_CONFIG="toolchain/uClibc/uClibc-0.9.32.config" >>>>> # BR2_PTHREAD_DEBUG is not set >>>>> # BR2_UCLIBC_INSTALL_TEST_SUITE is not set >>>>> >>>>> # >>>>> # Binutils Options >>>>> # >>>>> # BR2_BINUTILS_VERSION_2_20 is not set >>>>> BR2_BINUTILS_VERSION_2_20_1=y >>>>> # BR2_BINUTILS_VERSION_2_21 is not set >>>>> # BR2_BINUTILS_VERSION_2_21_1 is not set >>>>> BR2_BINUTILS_VERSION="2.20.1" >>>>> BR2_BINUTILS_EXTRA_CONFIG_OPTIONS="" >>>>> >>>>> # >>>>> # GCC Options >>>>> # >>>>> # BR2_GCC_VERSION_4_2_4 is not set >>>>> BR2_GCC_VERSION_4_3_X=y >>>>> # BR2_GCC_VERSION_4_4_X is not set >>>>> # BR2_GCC_VERSION_4_5_X is not set >>>>> # BR2_GCC_VERSION_4_6_X is not set >>>>> # BR2_GCC_VERSION_SNAP is not set >>>>> BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE=y >>>>> BR2_GCC_VERSION="4.3.6" >>>>> BR2_EXTRA_GCC_CONFIG_OPTIONS="" >>>>> # BR2_INSTALL_OBJC is not set >>>>> # BR2_INSTALL_FORTRAN is not set >>>>> # BR2_GCC_SHARED_LIBGCC is not set >>>>> # BR2_GCC_ENABLE_OPENMP is not set >>>>> >>>>> # >>>>> # Gdb Options >>>>> # >>>>> BR2_PACKAGE_GDB=y >>>>> BR2_PACKAGE_GDB_SERVER=y >>>>> # BR2_PACKAGE_GDB_HOST is not set >>>>> # BR2_GDB_VERSION_6_7_1 is not set >>>>> BR2_GDB_VERSION_6_8=y >>>>> # BR2_GDB_VERSION_7_0_1 is not set >>>>> # BR2_GDB_VERSION_7_1 is not set >>>>> BR2_GDB_VERSION="6.8" >>>>> BR2_LARGEFILE=y >>>>> BR2_INET_IPV6=y >>>>> BR2_INET_RPC=y >>>>> BR2_USE_WCHAR=y >>>>> BR2_ENABLE_LOCALE=y >>>>> BR2_TOOLCHAIN_HAS_THREADS=y >>>>> BR2_TOOLCHAIN_HAS_SHADOW_PASSWORDS=y >>>>> # BR2_ENABLE_LOCALE_PURGE is not set >>>>> BR2_NEEDS_GETTEXT=y >>>>> BR2_NEEDS_GETTEXT_IF_LOCALE=y >>>>> BR2_USE_MMU=y >>>>> BR2_TARGET_OPTIMIZATION="-pipe" >>>>> BR2_TARGET_LDFLAGS="" >>>>> >>>>> # >>>>> # Toolchain Options >>>>> # >>>>> BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y >>>>> BR2_TOOLCHAIN_BUILDROOT_INET_IPV6=y >>>>> BR2_TOOLCHAIN_BUILDROOT_INET_RPC=y >>>>> BR2_TOOLCHAIN_BUILDROOT_WCHAR=y >>>>> BR2_TOOLCHAIN_BUILDROOT_LOCALE=y >>>>> # BR2_TOOLCHAIN_BUILDROOT_CXX is not set >>>>> # BR2_TOOLCHAIN_BUILDROOT_USE_SSP is not set >>>>> # BR2_PTHREADS_NONE is not set >>>>> # BR2_PTHREADS is not set >>>>> BR2_PTHREADS_OLD=y >>>>> # BR2_PTHREADS_NATIVE is not set >>>>> >>>>> # >>>>> # System configuration >>>>> # >>>>> BR2_TARGET_GENERIC_HOSTNAME="buildroot" >>>>> BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot" >>>>> BR2_ROOTFS_DEVICE_CREATION_STATIC=y >>>>> # BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS is not set >>>>> # BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV is not set >>>>> # BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV is not set >>>>> BR2_ROOTFS_DEVICE_TABLE="target/generic/device_table.txt" >>>>> BR2_ROOTFS_STATIC_DEVICE_TABLE="target/generic/device_table_dev.txt" >>>>> BR2_ROOTFS_SKELETON_DEFAULT=y >>>>> # BR2_ROOTFS_SKELETON_CUSTOM is not set >>>>> BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" >>>>> # BR2_TARGET_GENERIC_GETTY_BAUDRATE_KEEP is not set >>>>> # BR2_TARGET_GENERIC_GETTY_BAUDRATE_9600 is not set >>>>> # BR2_TARGET_GENERIC_GETTY_BAUDRATE_19200 is not set >>>>> # BR2_TARGET_GENERIC_GETTY_BAUDRATE_38400 is not set >>>>> # BR2_TARGET_GENERIC_GETTY_BAUDRATE_57600 is not set >>>>> BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200=y >>>>> BR2_TARGET_GENERIC_GETTY_BAUDRATE="115200" >>>>> BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW=y >>>>> BR2_ROOTFS_POST_BUILD_SCRIPT="custom/copy_etc.sh" >>>>> >>>>> # >>>>> # Package Selection for the target >>>>> # >>>>> BR2_PACKAGE_BUSYBOX=y >>>>> # BR2_BUSYBOX_VERSION_1_16_X is not set >>>>> # BR2_BUSYBOX_VERSION_1_17_X is not set >>>>> BR2_BUSYBOX_VERSION_1_18_X=y >>>>> # BR2_PACKAGE_BUSYBOX_SNAPSHOT is not set >>>>> BR2_BUSYBOX_VERSION="1.18.5" >>>>> BR2_PACKAGE_BUSYBOX_CONFIG="vortex86/busybox.config" >>>>> BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y >>>>> # BR2_PACKAGE_CUSTOMIZE is not set >>>>> >>>>> # >>>>> # Audio and video libraries and applications >>>>> # >>>>> # BR2_PACKAGE_ALSA_LIB is not set >>>>> # BR2_PACKAGE_ALSA_UTILS is not set >>>>> # BR2_PACKAGE_AUMIX is not set >>>>> # BR2_PACKAGE_FAAD2 is not set >>>>> # BR2_PACKAGE_FLAC is not set >>>>> # BR2_PACKAGE_FFMPEG is not set >>>>> # BR2_PACKAGE_GSTREAMER is not set >>>>> # BR2_PACKAGE_LAME is not set >>>>> # BR2_PACKAGE_LIBAO is not set >>>>> # BR2_PACKAGE_LIBCDAUDIO is not set >>>>> # BR2_PACKAGE_LIBCUE is not set >>>>> # BR2_PACKAGE_LIBCUEFILE is not set >>>>> # BR2_PACKAGE_LIBDVDREAD is not set >>>>> # BR2_PACKAGE_LIBDVDNAV is not set >>>>> # BR2_PACKAGE_LIBID3TAG is not set >>>>> # BR2_PACKAGE_LIBMAD is not set >>>>> # BR2_PACKAGE_LIBMMS is not set >>>>> # BR2_PACKAGE_LIBMPD is not set >>>>> # BR2_PACKAGE_LIBMPEG2 is not set >>>>> # BR2_PACKAGE_LIBOGG is not set >>>>> # BR2_PACKAGE_LIBREPLAYGAIN is not set >>>>> # BR2_PACKAGE_LIBSAMPLERATE is not set >>>>> # BR2_PACKAGE_LIBSNDFILE is not set >>>>> # BR2_PACKAGE_LIBTHEORA is not set >>>>> # BR2_PACKAGE_LIBVORBIS is not set >>>>> >>>>> # >>>>> # Live555 needs C++ compiler >>>>> # >>>>> # BR2_PACKAGE_MADPLAY is not set >>>>> >>>>> # >>>>> # mpd requires a toolchain with C++ and WCHAR support >>>>> # >>>>> # BR2_PACKAGE_MPG123 is not set >>>>> # BR2_PACKAGE_MPLAYER is not set >>>>> # BR2_PACKAGE_MUSEPACK is not set >>>>> # BR2_PACKAGE_SPEEX is not set >>>>> >>>>> # >>>>> # swfdec requires a toolchain with WCHAR and C++ support >>>>> # >>>>> >>>>> # >>>>> # taglib requires a toolchain with C++ support enabled >>>>> # >>>>> # BR2_PACKAGE_TREMOR is not set >>>>> # BR2_PACKAGE_VORBIS_TOOLS is not set >>>>> # BR2_PACKAGE_WAVPACK is not set >>>>> >>>>> # >>>>> # Compressors and decompressors >>>>> # >>>>> # BR2_PACKAGE_BZIP2 is not set >>>>> # BR2_PACKAGE_GZIP is not set >>>>> # BR2_PACKAGE_LZOP is not set >>>>> # BR2_PACKAGE_XZ is not set >>>>> >>>>> # >>>>> # Debugging, profiling and benchmark >>>>> # >>>>> >>>>> # >>>>> # bonnie++ requires a toolchain with C++ support enabled >>>>> # >>>>> BR2_PACKAGE_DHRYSTONE=y >>>>> # BR2_PACKAGE_DMALLOC is not set >>>>> # BR2_PACKAGE_KEXEC is not set >>>>> BR2_PACKAGE_LMBENCH=y >>>>> BR2_PACKAGE_LSOF=y >>>>> # BR2_PACKAGE_LTP_TESTSUITE is not set >>>>> BR2_PACKAGE_LTRACE=y >>>>> BR2_PACKAGE_MEMSTAT=y >>>>> # BR2_PACKAGE_NETPERF is not set >>>>> >>>>> # >>>>> # oprofile requires a toolchain with C++ support enabled >>>>> # >>>>> BR2_PACKAGE_STRACE=y >>>>> # BR2_PACKAGE_WHETSTONE is not set >>>>> # BR2_PACKAGE_VALGRIND is not set >>>>> >>>>> # >>>>> # Development tools >>>>> # >>>>> # BR2_PACKAGE_AUTOCONF is not set >>>>> # BR2_PACKAGE_AUTOMAKE is not set >>>>> # BR2_PACKAGE_BINUTILS is not set >>>>> # BR2_PACKAGE_BISON is not set >>>>> # BR2_PACKAGE_BSDIFF is not set >>>>> # BR2_PACKAGE_CCACHE is not set >>>>> # BR2_PACKAGE_COREUTILS is not set >>>>> # BR2_PACKAGE_CVS is not set >>>>> # BR2_PACKAGE_DIFFUTILS is not set >>>>> # BR2_PACKAGE_DISTCC is not set >>>>> # BR2_PACKAGE_FINDUTILS is not set >>>>> # BR2_PACKAGE_FLEX is not set >>>>> # BR2_PACKAGE_GAWK is not set >>>>> >>>>> # >>>>> # gcc needs development files in target filesystem >>>>> # >>>>> # BR2_PACKAGE_GETTEXT is not set >>>>> # BR2_PACKAGE_LIBINTL is not set >>>>> # BR2_PACKAGE_GMP is not set >>>>> >>>>> # >>>>> # gperf requires a toolchain with C++ support enabled >>>>> # >>>>> # BR2_PACKAGE_GREP is not set >>>>> # BR2_PACKAGE_MAKE is not set >>>>> # BR2_PACKAGE_MPC is not set >>>>> # BR2_PACKAGE_MPFR is not set >>>>> # BR2_PACKAGE_LIBTOOL is not set >>>>> # BR2_PACKAGE_M4 is not set >>>>> # BR2_PACKAGE_PATCH is not set >>>>> # BR2_PACKAGE_PKG_CONFIG is not set >>>>> # BR2_PACKAGE_SED is not set >>>>> # BR2_PACKAGE_SSTRIP is not set >>>>> # BR2_PACKAGE_TAR is not set >>>>> >>>>> # >>>>> # Games >>>>> # >>>>> # BR2_PACKAGE_GNUCHESS is not set >>>>> # BR2_PACKAGE_PRBOOM is not set >>>>> >>>>> # >>>>> # Graphic libraries and applications (graphic/text) >>>>> # >>>>> >>>>> # >>>>> # Graphic applications >>>>> # >>>>> # BR2_PACKAGE_RRDTOOL is not set >>>>> >>>>> # >>>>> # graphic libraries >>>>> # >>>>> # BR2_PACKAGE_DIRECTFB is not set >>>>> # BR2_PACKAGE_FBDUMP is not set >>>>> # BR2_PACKAGE_FBGRAB is not set >>>>> # BR2_PACKAGE_FBSET is not set >>>>> # BR2_PACKAGE_FBV is not set >>>>> # BR2_PACKAGE_IMAGEMAGICK is not set >>>>> # BR2_PACKAGE_LINUX_FUSION is not set >>>>> # BR2_PACKAGE_SDL is not set >>>>> >>>>> # >>>>> # other GUIs >>>>> # >>>>> >>>>> # >>>>> # qt requires a toolchain with C++ support enabled >>>>> # >>>>> # BR2_PACKAGE_XORG7 is not set >>>>> >>>>> # >>>>> # X libraries and helper libraries >>>>> # >>>>> # BR2_PACKAGE_LIBERATION is not set >>>>> >>>>> # >>>>> # X Window managers >>>>> # >>>>> >>>>> # >>>>> # X applications >>>>> # >>>>> # BR2_PACKAGE_GOB2 is not set >>>>> >>>>> # >>>>> # midori requires C++, WCHAR in toolchain and libgtk2 >>>>> # >>>>> >>>>> # >>>>> # Hardware handling >>>>> # >>>>> # BR2_PACKAGE_ACPID is not set >>>>> # BR2_PACKAGE_CDRKIT is not set >>>>> # BR2_PACKAGE_CRAMFS is not set >>>>> >>>>> # >>>>> # dbus not available (need expat or libxml2) >>>>> # >>>>> # BR2_PACKAGE_DMRAID is not set >>>>> # BR2_PACKAGE_DOSFSTOOLS is not set >>>>> BR2_PACKAGE_E2FSPROGS=y >>>>> BR2_PACKAGE_E2FSPROGS_BADBLOCKS=y >>>>> BR2_PACKAGE_E2FSPROGS_CHATTR=y >>>>> # BR2_PACKAGE_E2FSPROGS_DEBUGFS is not set >>>>> BR2_PACKAGE_E2FSPROGS_DUMPE2FS=y >>>>> BR2_PACKAGE_E2FSPROGS_E2FREEFRAG=y >>>>> BR2_PACKAGE_E2FSPROGS_E2FSCK=y >>>>> # BR2_PACKAGE_E2FSPROGS_E2IMAGE is not set >>>>> BR2_PACKAGE_E2FSPROGS_E2LABEL=y >>>>> BR2_PACKAGE_E2FSPROGS_E2UNDO=y >>>>> BR2_PACKAGE_E2FSPROGS_FILEFRAG=y >>>>> BR2_PACKAGE_E2FSPROGS_FINDFS=y >>>>> BR2_PACKAGE_E2FSPROGS_FSCK=y >>>>> BR2_PACKAGE_E2FSPROGS_LOGSAVE=y >>>>> BR2_PACKAGE_E2FSPROGS_LSATTR=y >>>>> BR2_PACKAGE_E2FSPROGS_MKE2FS=y >>>>> BR2_PACKAGE_E2FSPROGS_MKLOSTFOUND=y >>>>> # BR2_PACKAGE_E2FSPROGS_RESIZE2FS is not set >>>>> BR2_PACKAGE_E2FSPROGS_TUNE2FS=y >>>>> BR2_PACKAGE_E2FSPROGS_UUIDGEN=y >>>>> BR2_PACKAGE_E2FSPROGS_UUIDD=y >>>>> # BR2_PACKAGE_EEPROG is not set >>>>> # BR2_PACKAGE_FCONFIG is not set >>>>> # BR2_PACKAGE_FIS is not set >>>>> # BR2_PACKAGE_GADGETFS_TEST is not set >>>>> >>>>> # >>>>> # gdisk requires a toolchain with LARGEFILE/WCHAR/C++ support enabled >>>>> # >>>>> # BR2_PACKAGE_GENEXT2FS is not set >>>>> # BR2_PACKAGE_GENROMFS is not set >>>>> # BR2_PACKAGE_GPSD is not set >>>>> # BR2_PACKAGE_GVFS is not set >>>>> # BR2_PACKAGE_HDPARM is not set >>>>> # BR2_PACKAGE_HWDATA is not set >>>>> # BR2_PACKAGE_I2C_TOOLS is not set >>>>> # BR2_PACKAGE_INPUT_EVENT_DAEMON is not set >>>>> # BR2_PACKAGE_INPUT_TOOLS is not set >>>>> BR2_PACKAGE_IOSTAT=y >>>>> # BR2_PACKAGE_IRDA_UTILS is not set >>>>> # BR2_PACKAGE_KBD is not set >>>>> # BR2_PACKAGE_LIBV4L is not set >>>>> # BR2_PACKAGE_LM_SENSORS is not set >>>>> # BR2_PACKAGE_LSUIO is not set >>>>> # BR2_PACKAGE_LVM2 is not set >>>>> BR2_PACKAGE_MAKEDEVS=y >>>>> # BR2_PACKAGE_MDADM is not set >>>>> # BR2_PACKAGE_MEMTESTER is not set >>>>> # BR2_PACKAGE_MTD is not set >>>>> # BR2_PACKAGE_NTFS_3G is not set >>>>> # BR2_PACKAGE_NTFSPROGS is not set >>>>> BR2_PACKAGE_PCIUTILS=y >>>>> # BR2_PACKAGE_RNG_TOOLS is not set >>>>> # BR2_PACKAGE_SDPARM is not set >>>>> BR2_PACKAGE_SETSERIAL=y >>>>> >>>>> # >>>>> # smartmontools requires a toolchain with C++ support enabled >>>>> # >>>>> # BR2_PACKAGE_SQUASHFS is not set >>>>> # BR2_PACKAGE_SREDIRD is not set >>>>> # BR2_PACKAGE_SSHFS is not set >>>>> BR2_PACKAGE_STATSERIAL=y >>>>> # BR2_PACKAGE_SYSSTAT is not set >>>>> # BR2_PACKAGE_TI_UTILS is not set >>>>> # BR2_PACKAGE_UBOOT_TOOLS is not set >>>>> >>>>> # >>>>> # udev requires /dev mgmnt set to udev under System configuration >>>>> # >>>>> # BR2_PACKAGE_USB_MODESWITCH is not set >>>>> # BR2_PACKAGE_USBUTILS is not set >>>>> # BR2_PACKAGE_WIPE is not set >>>>> # BR2_PACKAGE_XFSPROGS is not set >>>>> >>>>> # >>>>> # Interpreter languages and scripting >>>>> # >>>>> # BR2_PACKAGE_HASERL is not set >>>>> # BR2_PACKAGE_LUA is not set >>>>> # BR2_PACKAGE_MICROPERL is not set >>>>> # BR2_PACKAGE_PHP is not set >>>>> # BR2_PACKAGE_PYTHON is not set >>>>> # BR2_PACKAGE_RUBY is not set >>>>> # BR2_PACKAGE_TCL is not set >>>>> >>>>> # >>>>> # Libraries >>>>> # >>>>> >>>>> # >>>>> # Compression and decompression >>>>> # >>>>> # BR2_PACKAGE_LIBARCHIVE is not set >>>>> # BR2_PACKAGE_LZO is not set >>>>> BR2_PACKAGE_ZLIB=y >>>>> >>>>> # >>>>> # Crypto >>>>> # >>>>> # BR2_PACKAGE_BEECRYPT is not set >>>>> # BR2_PACKAGE_GNUTLS is not set >>>>> # BR2_PACKAGE_LIBGCRYPT is not set >>>>> # BR2_PACKAGE_LIBGPG_ERROR is not set >>>>> # BR2_PACKAGE_LIBNSS is not set >>>>> # BR2_PACKAGE_OPENSSL is not set >>>>> >>>>> # >>>>> # Database >>>>> # >>>>> # BR2_PACKAGE_BERKELEYDB is not set >>>>> >>>>> # >>>>> # Mysql client requires a toolchain with C++ support enabled >>>>> # >>>>> # BR2_PACKAGE_SQLITE is not set >>>>> >>>>> # >>>>> # Filesystem >>>>> # >>>>> # BR2_PACKAGE_GAMIN is not set >>>>> # BR2_PACKAGE_LIBCONFIG is not set >>>>> # BR2_PACKAGE_LIBCONFUSE is not set >>>>> # BR2_PACKAGE_LIBFUSE is not set >>>>> # BR2_PACKAGE_LIBLOCKFILE is not set >>>>> # BR2_PACKAGE_LIBSYSFS is not set >>>>> >>>>> # >>>>> # Graphics >>>>> # >>>>> # BR2_PACKAGE_ATK is not set >>>>> # BR2_PACKAGE_CAIRO is not set >>>>> # BR2_PACKAGE_FONTCONFIG is not set >>>>> # BR2_PACKAGE_FREETYPE is not set >>>>> # BR2_PACKAGE_JPEG is not set >>>>> # BR2_PACKAGE_LIBART is not set >>>>> # BR2_PACKAGE_LIBEXIF is not set >>>>> # BR2_PACKAGE_GDK_PIXBUF is not set >>>>> >>>>> # >>>>> # libgtk2 requires a toolchain with WCHAR and C++ support >>>>> # >>>>> # BR2_PACKAGE_LIBPNG is not set >>>>> >>>>> # >>>>> # libraw requires a toolchain with C++ support enabled >>>>> # >>>>> # BR2_PACKAGE_LIBSVGTINY is not set >>>>> # BR2_PACKAGE_LIBUNGIF is not set >>>>> >>>>> # >>>>> # pango requires a toolchain with WCHAR and C++ support >>>>> # >>>>> # BR2_PACKAGE_PIXMAN is not set >>>>> # BR2_PACKAGE_TIFF is not set >>>>> >>>>> # >>>>> # webkit requires C++, WCHAR in toolchain and libgtk2 >>>>> # >>>>> >>>>> # >>>>> # Hardware handling >>>>> # >>>>> # BR2_PACKAGE_LIBAIO is not set >>>>> # BR2_PACKAGE_LIBRAW1394 is not set >>>>> # BR2_PACKAGE_TSLIB is not set >>>>> # BR2_PACKAGE_LIBHID is not set >>>>> # BR2_PACKAGE_LIBIQRF is not set >>>>> # BR2_PACKAGE_LIBUSB is not set >>>>> >>>>> # >>>>> # Networking >>>>> # >>>>> # BR2_PACKAGE_LIBCGI is not set >>>>> >>>>> # >>>>> # libcgicc requires a toolchain with C++ support enabled >>>>> # >>>>> # BR2_PACKAGE_LIBCURL is not set >>>>> # BR2_PACKAGE_LIBDNET is not set >>>>> # BR2_PACKAGE_LIBEXOSIP2 is not set >>>>> # BR2_PACKAGE_LIBIDN is not set >>>>> # BR2_PACKAGE_LIBMICROHTTPD is not set >>>>> # BR2_PACKAGE_NEON is not set >>>>> # BR2_PACKAGE_LIBMNL is not set >>>>> # BR2_PACKAGE_LIBNL is not set >>>>> # BR2_PACKAGE_LIBPCAP is not set >>>>> # BR2_PACKAGE_LIBOSIP2 is not set >>>>> # BR2_PACKAGE_LIBRSYNC is not set >>>>> # BR2_PACKAGE_LIBSOUP is not set >>>>> # BR2_PACKAGE_LIBUPNP is not set >>>>> >>>>> # >>>>> # Other >>>>> # >>>>> # BR2_PACKAGE_LIBARGTABLE2 is not set >>>>> # BR2_PACKAGE_ARGP_STANDALONE is not set >>>>> # BR2_PACKAGE_LIBATOMIC_OPS is not set >>>>> # BR2_PACKAGE_LIBCAP is not set >>>>> # BR2_PACKAGE_LIBDAEMON is not set >>>>> BR2_PACKAGE_LIBELF=y >>>>> # BR2_PACKAGE_LIBEVENT is not set >>>>> # BR2_PACKAGE_LIBFFI is not set >>>>> # BR2_PACKAGE_LIBGLIB2 is not set >>>>> # BR2_PACKAGE_LIBNSPR is not set >>>>> >>>>> # >>>>> # libsigc++ requires a toolchain with C++ support enabled >>>>> # >>>>> # BR2_PACKAGE_ORC is not set >>>>> >>>>> # >>>>> # Text and terminal handling >>>>> # >>>>> >>>>> # >>>>> # enchant requires a toolchain with C++ and WCHAR support enabled >>>>> # >>>>> >>>>> # >>>>> # icu requires a toolchain with C++ support and WCHAR enabled >>>>> # >>>>> BR2_PACKAGE_NCURSES=y >>>>> # BR2_PACKAGE_NCURSES_TARGET_PANEL is not set >>>>> # BR2_PACKAGE_NCURSES_TARGET_FORM is not set >>>>> # BR2_PACKAGE_NCURSES_TARGET_MENU is not set >>>>> # BR2_PACKAGE_NEWT is not set >>>>> # BR2_PACKAGE_PCRE is not set >>>>> # BR2_PACKAGE_POPT is not set >>>>> # BR2_PACKAGE_READLINE is not set >>>>> # BR2_PACKAGE_SLANG is not set >>>>> >>>>> # >>>>> # JSON/XML >>>>> # >>>>> # BR2_PACKAGE_EXPAT is not set >>>>> # BR2_PACKAGE_EZXML is not set >>>>> # BR2_PACKAGE_LIBROXML is not set >>>>> # BR2_PACKAGE_LIBXML2 is not set >>>>> # BR2_PACKAGE_LIBXSLT is not set >>>>> # BR2_PACKAGE_LIBYAML is not set >>>>> # BR2_PACKAGE_MXML is not set >>>>> >>>>> # >>>>> # xerces-c++ requires a toolchain with C++ and WCHAR support enabled >>>>> # >>>>> # BR2_PACKAGE_YAJL is not set >>>>> >>>>> # >>>>> # Miscellaneous >>>>> # >>>>> # BR2_PACKAGE_SHARED_MIME_INFO is not set >>>>> >>>>> # >>>>> # Networking applications >>>>> # >>>>> # BR2_PACKAGE_ARGUS is not set >>>>> # BR2_PACKAGE_AVAHI is not set >>>>> # BR2_PACKAGE_AXEL is not set >>>>> # BR2_PACKAGE_BOA is not set >>>>> # BR2_PACKAGE_BIND is not set >>>>> # BR2_PACKAGE_BMON is not set >>>>> # BR2_PACKAGE_BRIDGE is not set >>>>> # BR2_PACKAGE_BWM_NG is not set >>>>> # BR2_PACKAGE_CAN_UTILS is not set >>>>> >>>>> # >>>>> # ctorrent requires a toolchain with C++ support enabled >>>>> # >>>>> # BR2_PACKAGE_CUPS is not set >>>>> # BR2_PACKAGE_DHCP is not set >>>>> # BR2_PACKAGE_DHCPDUMP is not set >>>>> # BR2_PACKAGE_DNSMASQ is not set >>>>> BR2_PACKAGE_DROPBEAR=y >>>>> # BR2_PACKAGE_DROPBEAR_DISABLE_REVERSEDNS is not set >>>>> # BR2_PACKAGE_DROPBEAR_SMALL is not set >>>>> # BR2_PACKAGE_EBTABLES is not set >>>>> # BR2_PACKAGE_ETHTOOL is not set >>>>> # BR2_PACKAGE_HOSTAPD is not set >>>>> # BR2_PACKAGE_IFPLUGD is not set >>>>> >>>>> # >>>>> # iperf requires a toolchain with C++ support enabled >>>>> # >>>>> # BR2_PACKAGE_IPROUTE2 is not set >>>>> # BR2_PACKAGE_IPSEC_TOOLS is not set >>>>> # BR2_PACKAGE_IPSET is not set >>>>> # BR2_PACKAGE_IPTABLES is not set >>>>> # BR2_PACKAGE_IW is not set >>>>> >>>>> # >>>>> # Kismet requires a toolchain with C++ support enabled >>>>> # >>>>> # BR2_PACKAGE_XL2TP is not set >>>>> # BR2_PACKAGE_LIGHTTPD is not set >>>>> # BR2_PACKAGE_LINKS is not set >>>>> # BR2_PACKAGE_LRZSZ is not set >>>>> # BR2_PACKAGE_MII_DIAG is not set >>>>> # BR2_PACKAGE_MROUTED is not set >>>>> # BR2_PACKAGE_MUTT is not set >>>>> # BR2_PACKAGE_NBD is not set >>>>> # BR2_PACKAGE_NCFTP is not set >>>>> # BR2_PACKAGE_NETCAT is not set >>>>> # BR2_PACKAGE_NETKITBASE is not set >>>>> # BR2_PACKAGE_NETKITTELNET is not set >>>>> # BR2_PACKAGE_NETPLUG is not set >>>>> # BR2_PACKAGE_NETSNMP is not set >>>>> # BR2_PACKAGE_NETSTAT_NAT is not set >>>>> # BR2_PACKAGE_NFS_UTILS is not set >>>>> # BR2_PACKAGE_NGIRCD is not set >>>>> BR2_PACKAGE_NTP=y >>>>> # BR2_PACKAGE_NTP_SNTP is not set >>>>> # BR2_PACKAGE_NTP_NTP_KEYGEN is not set >>>>> BR2_PACKAGE_NTP_NTPD=y >>>>> BR2_PACKAGE_NTP_NTPDATE=y >>>>> # BR2_PACKAGE_NTP_NTPDC is not set >>>>> BR2_PACKAGE_NTP_NTPQ=y >>>>> BR2_PACKAGE_NTP_TICKADJ=y >>>>> # BR2_PACKAGE_NUTTCP is not set >>>>> # BR2_PACKAGE_OLSR is not set >>>>> # BR2_PACKAGE_OPENNTPD is not set >>>>> # BR2_PACKAGE_OPENSSH is not set >>>>> # BR2_PACKAGE_OPENVPN is not set >>>>> # BR2_PACKAGE_PORTMAP is not set >>>>> # BR2_PACKAGE_PPPD is not set >>>>> # BR2_PACKAGE_RADVD is not set >>>>> # BR2_PACKAGE_PPTP_LINUX is not set >>>>> # BR2_PACKAGE_PROFTPD is not set >>>>> # BR2_PACKAGE_QUAGGA is not set >>>>> # BR2_PACKAGE_RSH_REDONE is not set >>>>> # BR2_PACKAGE_RSYNC is not set >>>>> # BR2_PACKAGE_SAMBA is not set >>>>> # BR2_PACKAGE_SER2NET is not set >>>>> # BR2_PACKAGE_SOCAT is not set >>>>> # BR2_PACKAGE_SPAWN_FCGI is not set >>>>> >>>>> # >>>>> # Squid requires a toolchain with C++ and IPv6 support enabled >>>>> # >>>>> # BR2_PACKAGE_STUNNEL is not set >>>>> # BR2_PACKAGE_TCPDUMP is not set >>>>> # BR2_PACKAGE_TCPREPLAY is not set >>>>> # BR2_PACKAGE_TFTPD is not set >>>>> # BR2_PACKAGE_THTTPD is not set >>>>> # BR2_PACKAGE_TINYHTTPD is not set >>>>> # BR2_PACKAGE_TN5250 is not set >>>>> # BR2_PACKAGE_TTCP is not set >>>>> # BR2_PACKAGE_UDPCAST is not set >>>>> # BR2_PACKAGE_VPNC is not set >>>>> BR2_PACKAGE_VSFTPD=y >>>>> # BR2_PACKAGE_VTUN is not set >>>>> # BR2_PACKAGE_WGET is not set >>>>> # BR2_PACKAGE_WIRELESS_TOOLS is not set >>>>> # BR2_PACKAGE_WPA_SUPPLICANT is not set >>>>> >>>>> # >>>>> # Package managers >>>>> # >>>>> # BR2_PACKAGE_IPKG is not set >>>>> >>>>> # >>>>> # rpm requires libneon with SSL, XML and ZLIB support >>>>> # >>>>> >>>>> # >>>>> # xz payload support requires a toolchain with c++ support >>>>> # >>>>> >>>>> # >>>>> # Shell and utilities >>>>> # >>>>> # BR2_PACKAGE_AT is not set >>>>> # BR2_PACKAGE_BASH is not set >>>>> # BR2_PACKAGE_DASH is not set >>>>> # BR2_PACKAGE_DIALOG is not set >>>>> # BR2_PACKAGE_FILE is not set >>>>> # BR2_PACKAGE_INOTIFY_TOOLS is not set >>>>> # BR2_PACKAGE_LOCKFILE_PROGS is not set >>>>> # BR2_PACKAGE_LOGROTATE is not set >>>>> # BR2_PACKAGE_SCREEN is not set >>>>> # BR2_PACKAGE_SUDO is not set >>>>> # BR2_PACKAGE_WHICH is not set >>>>> # BR2_PACKAGE_XMLSTARLET is not set >>>>> >>>>> # >>>>> # System tools >>>>> # >>>>> # BR2_PACKAGE_ACL is not set >>>>> # BR2_PACKAGE_ATTR is not set >>>>> # BR2_PACKAGE_BOOTUTILS is not set >>>>> # BR2_PACKAGE_HTOP is not set >>>>> # BR2_PACKAGE_MODULE_INIT_TOOLS is not set >>>>> # BR2_PACKAGE_PROCPS is not set >>>>> # BR2_PACKAGE_PSMISC is not set >>>>> # BR2_PACKAGE_RSYSLOG is not set >>>>> # BR2_PACKAGE_SYSKLOGD is not set >>>>> # BR2_PACKAGE_SYSVINIT is not set >>>>> BR2_PACKAGE_UTIL_LINUX=y >>>>> BR2_PACKAGE_UTIL_LINUX_MOUNT=y >>>>> BR2_PACKAGE_UTIL_LINUX_FSCK=y >>>>> # BR2_PACKAGE_UTIL_LINUX_LIBMOUNT is not set >>>>> BR2_PACKAGE_UTIL_LINUX_LIBUUID=y >>>>> # BR2_PACKAGE_UTIL_LINUX_UUIDD is not set >>>>> BR2_PACKAGE_UTIL_LINUX_LIBBLKID=y >>>>> # BR2_PACKAGE_UTIL_LINUX_AGETTY is not set >>>>> # BR2_PACKAGE_UTIL_LINUX_CRAMFS is not set >>>>> # BR2_PACKAGE_UTIL_LINUX_SWITCH_ROOT is not set >>>>> # BR2_PACKAGE_UTIL_LINUX_PIVOT_ROOT is not set >>>>> # BR2_PACKAGE_UTIL_LINUX_FALLOCATE is not set >>>>> # BR2_PACKAGE_UTIL_LINUX_UNSHARE is not set >>>>> # BR2_PACKAGE_UTIL_LINUX_RENAME is not set >>>>> # BR2_PACKAGE_UTIL_LINUX_SCHEDUTILS is not set >>>>> # BR2_PACKAGE_UTIL_LINUX_WALL is not set >>>>> # BR2_PACKAGE_UTIL_LINUX_ARCH is not set >>>>> # BR2_PACKAGE_UTIL_LINUX_INIT is not set >>>>> # BR2_PACKAGE_UTIL_LINUX_KILL is not set >>>>> # BR2_PACKAGE_UTIL_LINUX_LAST is not set >>>>> # BR2_PACKAGE_UTIL_LINUX_MESG is not set >>>>> # BR2_PACKAGE_UTIL_LINUX_PARTX is not set >>>>> # BR2_PACKAGE_UTIL_LINUX_RAW is not set >>>>> # BR2_PACKAGE_UTIL_LINUX_RESET is not set >>>>> # BR2_PACKAGE_UTIL_LINUX_LOGIN_UTILS is not set >>>>> # BR2_PACKAGE_UTIL_LINUX_WRITE is not set >>>>> >>>>> # >>>>> # Text editors and viewers >>>>> # >>>>> # BR2_PACKAGE_ED is not set >>>>> # BR2_PACKAGE_LESS is not set >>>>> BR2_PACKAGE_NANO=y >>>>> # BR2_PACKAGE_UEMACS is not set >>>>> # BR2_PACKAGE_VIM is not set >>>>> >>>>> # >>>>> # Filesystem images >>>>> # >>>>> # BR2_TARGET_ROOTFS_CRAMFS is not set >>>>> # BR2_TARGET_ROOTFS_CLOOP is not set >>>>> BR2_TARGET_ROOTFS_EXT2=y >>>>> BR2_TARGET_ROOTFS_EXT2_BLOCKS=0 >>>>> BR2_TARGET_ROOTFS_EXT2_INODES=0 >>>>> BR2_TARGET_ROOTFS_EXT2_RESBLKS=0 >>>>> BR2_TARGET_ROOTFS_EXT2_NONE=y >>>>> # BR2_TARGET_ROOTFS_EXT2_GZIP is not set >>>>> # BR2_TARGET_ROOTFS_EXT2_BZIP2 is not set >>>>> # BR2_TARGET_ROOTFS_EXT2_LZMA is not set >>>>> # BR2_TARGET_ROOTFS_JFFS2 is not set >>>>> # BR2_TARGET_ROOTFS_UBIFS is not set >>>>> # BR2_TARGET_ROOTFS_SQUASHFS is not set >>>>> # BR2_TARGET_ROOTFS_TAR is not set >>>>> # BR2_TARGET_ROOTFS_CPIO is not set >>>>> # BR2_TARGET_ROOTFS_ISO9660 is not set >>>>> # BR2_TARGET_ROOTFS_INITRAMFS is not set >>>>> # BR2_TARGET_ROOTFS_ROMFS is not set >>>>> >>>>> # >>>>> # Bootloaders >>>>> # >>>>> # BR2_TARGET_BAREBOX is not set >>>>> # BR2_TARGET_GRUB is not set >>>>> BR2_TARGET_SYSLINUX=y >>>>> # BR2_TARGET_SYSLINUX_ISOLINUX is not set >>>>> # BR2_TARGET_SYSLINUX_PXELINUX is not set >>>>> # BR2_TARGET_UBOOT is not set >>>>> >>>>> # >>>>> # Kernel >>>>> # >>>>> BR2_LINUX_KERNEL=y >>>>> # BR2_LINUX_KERNEL_2_6_39 is not set >>>>> # BR2_LINUX_KERNEL_SAME_AS_HEADERS is not set >>>>> BR2_LINUX_KERNEL_CUSTOM_VERSION=y >>>>> # BR2_LINUX_KERNEL_CUSTOM_TARBALL is not set >>>>> # BR2_LINUX_KERNEL_CUSTOM_GIT is not set >>>>> BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.0.4" >>>>> BR2_LINUX_KERNEL_VERSION="3.0.4" >>>>> BR2_LINUX_KERNEL_PATCH="" >>>>> # BR2_LINUX_KERNEL_USE_DEFCONFIG is not set >>>>> BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y >>>>> BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="/home/marc/linux-3.0.4/.config" >>>>> BR2_LINUX_KERNEL_BZIMAGE=y >>>>> # BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM is not set >>>>> BR2_LINUX_KERNEL_INSTALL_TARGET=y >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> buildroot mailing list >>>>> buildroot at busybox.net >>>>> http://lists.busybox.net/mailman/listinfo/buildroot >>>>> >>>> >>> _______________________________________________ >>> buildroot mailing list >>> buildroot at busybox.net >>> http://lists.busybox.net/mailman/listinfo/buildroot >>> >>> >>> >> _______________________________________________ >> buildroot mailing list >> buildroot at busybox.net >> http://lists.busybox.net/mailman/listinfo/buildroot >> > >