From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marc Leclerc Date: Tue, 20 Sep 2011 07:01:01 -0400 Subject: [Buildroot] Toolchain generate invalid executable format In-Reply-To: References: <4E7266AA.1000103@signaturealpha.com> <4E732E0F.6070709@signaturealpha.com> <4E73B2A8.4030507@signaturealpha.com> <4E77B4C9.5000302@signaturealpha.com> Message-ID: <4E78726D.4060801@signaturealpha.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hi, I will try an Hello world this afternoon, gdb version is 6.8 running on the target. I compile my app using a makefile that has not changed in months, I will also post my makefile later, there may be a setting that is now required that was not before. BR2_PACKAGE_GDB=y BR2_PACKAGE_GDB_SERVER=y Regards Marc On 2011-09-20 03:41, Thomas De Schampheleire wrote: > Hi, > > On Mon, Sep 19, 2011 at 11:31 PM, Marc Leclerc > wrote: >> Hi, >> >> first thanks for your time, appreciated. >> >> I was under the impression that the environement (target) was built using >> the downloaded toolchain and assuming this, shouldn't the applications built >> with the toolchain have problem as well. > It depends on what the underlying problem is. Maybe your application > does something 'special' that is interpreted differently now. > > How do you compile your application? > Did you try compiling a hello world application in exactly the same > way as you build your application? > >> I have tried loading the application with gdb which tell me the file is >> invalid format. > Which gdb are you using and where are you running it? > Your buildroot configuration does not show a gdb for the host being > built, so I assume you are using the target gdb on your host, or the > target gdb on target. > I have to say that I'm unfamiliar with embedded development on x86 > targets, so I can only try to guide you in general ways. > > Best regards, > Thomas > >> The target is a Vortex86DX and has a floating point unit. >> >> Both executable also runs on my host (i5) >> >> The only difference in gcc -v output are paths and gcc version (4.3.5 vs >> 4.3.6) and --disable-libomp >> >> Does any of this makes sence? >> >> Regards >> Marc >> >> On 2011-09-17 07:12, Thomas De Schampheleire wrote: >>> Hi, >>> >>> On Fri, Sep 16, 2011 at 10:33 PM, Marc Leclerc >>> wrote: >>>> If it may help here is the -v output of the gcc compiler and output from >>>> compiling my app >>>> >>>> Thanks >>> At least on my host, both apps you sent run fine. The 'file' command >>> also shows that both apps are built for i486 (I was thinking you had a >>> binary for the wrong architecture). >>> >>> If you get a specific invalid instruction exception, you should try to >>> figure out which instruction it is. An example could be that your new >>> app is compiled with hardware-floating point instructions, while your >>> processor doesn't have such floating point unit. >>> >>> It's a good idea to compare the output you gave below for both your >>> toolchains, and see if there is a difference... >>> >>> Thomas >>> >>>> marc at Vostro-Linux:~/Smartlinks/DNP3/sa_DNP3$ i486-linux-gcc -v >>>> Using built-in specs. >>>> Target: i486-unknown-linux-uclibc >>>> Configured with: >>>> /home/marc/buildroot/output/toolchain/gcc-4.3.6/configure >>>> --prefix=/home/marc/buildroot/output/host/usr --build=i686-pc-linux-gnu >>>> --host=i686-pc-linux-gnu --target=i486-unknown-linux-uclibc >>>> --enable-languages=c >>>> >>>> --with-sysroot=/home/marc/buildroot/output/host/usr/i486-unknown-linux-uclibc/sysroot >>>> >>>> --with-build-time-tools=/home/marc/buildroot/output/host/usr/i486-unknown-linux-uclibc/bin >>>> --disable-__cxa_atexit --enable-target-optspace --disable-libgomp >>>> --with-gnu-ld --disable-libssp --disable-multilib --disable-tls >>>> --disable-shared --with-gmp=/home/marc/buildroot/output/host/usr >>>> --with-mpfr=/home/marc/buildroot/output/host/usr --enable-threads >>>> --disable-decimal-float --with-arch=i486 --with-tune=i486 >>>> --with-pkgversion='Buildroot 2011.08' >>>> --with-bugurl=http://bugs.buildroot.net/ >>>> Thread model: posix >>>> gcc version 4.3.6 (Buildroot 2011.08) >>>> marc at Vostro-Linux:~/Smartlinks/DNP3/sa_DNP3$ make >>>> i486-linux-gcc -c -g -I ../ -I ../../sa_shared/ -DTMW_LINUX_TARGET >>>> -DSA_DNP3 >>>> \ >>>> -oobj_gcc/sa_DNP3.o \ >>>> sa_DNP3.c >>>> i486-linux-gcc -c -g -I ../ -I ../../sa_shared/ -DTMW_LINUX_TARGET >>>> -DSA_DNP3 \ >>>> \ >>>> -oobj_gcc/vdx_gpio.o \ >>>> ../../sa_shared/vdx_gpio.c >>>> i486-linux-gcc -c -g -I ../ -I ../../sa_shared/ -DTMW_LINUX_TARGET >>>> -DSA_DNP3 \ >>>> \ >>>> -oobj_gcc/vdx_isaio.o \ >>>> ../../sa_shared/vdx_isaio.c >>>> i486-linux-gcc -c -g -I ../ -I ../../sa_shared/ -DTMW_LINUX_TARGET >>>> -DSA_DNP3 \ >>>> \ >>>> -oobj_gcc/sa_simulate.o \ >>>> ../../sa_shared/sa_simulate.c >>>> i486-linux-gcc -c -g -I ../ -I ../../sa_shared/ -DTMW_LINUX_TARGET >>>> -DSA_DNP3 \ >>>> \ >>>> -oobj_gcc/sa_comtrade.o \ >>>> ../../sa_shared/sa_comtrade.c >>>> i486-linux-gcc -c -g -I ../ -I ../../sa_shared/ -DTMW_LINUX_TARGET >>>> -DSA_DNP3 \ >>>> \ >>>> -oobj_gcc/sa_calculation.o \ >>>> ../../sa_shared/sa_calculation.c >>>> i486-linux-gcc -c -g -I ../ -I ../../sa_shared/ -DTMW_LINUX_TARGET >>>> -DSA_DNP3 \ >>>> \ >>>> -oobj_gcc/sa_config.o \ >>>> ../../sa_shared/sa_config.c >>>> i486-linux-gcc -g -static -o ../bin/sa_DNP3 \ >>>> obj_gcc/sa_DNP3.o \ >>>> obj_gcc/vdx_gpio.o \ >>>> obj_gcc/vdx_isaio.o \ >>>> obj_gcc/sa_simulate.o \ >>>> obj_gcc/sa_comtrade.o \ >>>> obj_gcc/sa_calculation.o \ >>>> obj_gcc/sa_config.o \ >>>> ../tmwscl/dnp.lib ../tmwscl/utils.lib ../liniotarg.lib -lpthread >>>> >>>> >>>> >>>> On 2011-09-16 07:07, Marc Leclerc wrote: >>>>> Hi, >>>>> >>>>> BR2_i386=y >>>>> BR2_x86_i486=y >>>>> >>>>> >>>>> BR2_GCC_TARGET_TUNE="i486" >>>>> BR2_GCC_TARGET_ARCH="i486" >>>>> >>>>> Thanks >>>>> >>>>> On 2011-09-16 01:36, Thomas De Schampheleire wrote: >>>>>> Hi, >>>>>> >>>>>> On Thu, Sep 15, 2011 at 10:57 PM, Marc Leclerc >>>>>> wrote: >>>>>>> Hi, >>>>>>> >>>>>>> Finally got a working environment after going back to the version of >>>>>>> tools I >>>>>>> had on my previous setup beside the kernel (now 3.0.4) >>>>>>> >>>>>>> One big problem though when I compile my application from my >>>>>>> workstation >>>>>>> using the buildroot toolchain it no longer runs on my target leaving >>>>>>> an >>>>>>> illegal instruction message. gdb (6.8) say the file format is not >>>>>>> recognized. if i take the same app compiled with my previous setup it >>>>>>> runs >>>>>>> fine (no changes have been made to the source, only had to change the >>>>>>> PATH >>>>>>> (to the compiler) since it changed from the buildroot version I was >>>>>>> using. >>>>>> What architecture is your target? >>>>>> What is the output of 'file' ? >>>>>> >>>>>>> Here is my buildroot .config, hopefully this is only caused by a >>>>>>> change >>>>>>> in >>>>>>> default configuration >>>>>>> >>>>>>> Thanks >>>>>>> >>>>>>> # >>>>>>> # Automatically generated make config: don't edit >>>>>>> # Buildroot 2011.08 Configuration >>>>>>> # Thu Sep 15 14:57:25 2011 >>>>>>> # >>>>>>> BR2_HAVE_DOT_CONFIG=y >>>>>>> # BR2_arm is not set >>>>>>> # BR2_armeb is not set >>>>>>> # BR2_avr32 is not set >>>>>>> # BR2_bfin is not set >>>>>>> BR2_i386=y >>>>>>> # BR2_mips is not set >>>>>>> # BR2_mipsel is not set >>>>>>> # BR2_powerpc is not set >>>>>>> # BR2_sh is not set >>>>>>> # BR2_sh64 is not set >>>>>>> # BR2_sparc is not set >>>>>>> # BR2_x86_64 is not set >>>>>>> # BR2_xtensa is not set >>>>>>> # BR2_x86_i386 is not set >>>>>>> BR2_x86_i486=y >>>>>>> # BR2_x86_i586 is not set >>>>>>> # BR2_x86_i686 is not set >>>>>>> # BR2_x86_pentiumpro is not set >>>>>>> # BR2_x86_pentium_mmx is not set >>>>>>> # BR2_x86_pentium_m is not set >>>>>>> # BR2_x86_pentium2 is not set >>>>>>> # BR2_x86_pentium3 is not set >>>>>>> # BR2_x86_pentium4 is not set >>>>>>> # BR2_x86_prescott is not set >>>>>>> # BR2_x86_nocona is not set >>>>>>> # BR2_x86_core2 is not set >>>>>>> # BR2_x86_k6 is not set >>>>>>> # BR2_x86_k6_2 is not set >>>>>>> # BR2_x86_athlon is not set >>>>>>> # BR2_x86_athlon_4 is not set >>>>>>> # BR2_x86_opteron is not set >>>>>>> # BR2_x86_opteron_sse3 is not set >>>>>>> # BR2_x86_barcelona is not set >>>>>>> # BR2_x86_geode is not set >>>>>>> # BR2_x86_c3 is not set >>>>>>> # BR2_x86_c32 is not set >>>>>>> # BR2_x86_winchip_c6 is not set >>>>>>> # BR2_x86_winchip2 is not set >>>>>>> BR2_ARCH="i486" >>>>>>> BR2_ENDIAN="LITTLE" >>>>>>> BR2_GCC_TARGET_TUNE="i486" >>>>>>> BR2_GCC_TARGET_ARCH="i486" >>>>>>> >>>>>>> # >>>>>>> # Build options >>>>>>> # >>>>>>> >>>>>>> # >>>>>>> # Commands >>>>>>> # >>>>>>> BR2_WGET="wget --passive-ftp -nd -t 3" >>>>>>> BR2_SVN="svn" >>>>>>> BR2_BZR="bzr" >>>>>>> BR2_GIT="git" >>>>>>> BR2_ZCAT="gzip -d -c" >>>>>>> BR2_BZCAT="bzcat" >>>>>>> BR2_XZCAT="xzcat" >>>>>>> BR2_TAR_OPTIONS="" >>>>>>> BR2_DL_DIR="$(TOPDIR)/dl" >>>>>>> BR2_HOST_DIR="$(BASE_DIR)/host" >>>>>>> >>>>>>> # >>>>>>> # Mirrors and Download locations >>>>>>> # >>>>>>> BR2_PRIMARY_SITE="" >>>>>>> BR2_BACKUP_SITE="http://sources.buildroot.net/" >>>>>>> BR2_SOURCEFORGE_MIRROR="kent" >>>>>>> BR2_KERNEL_MIRROR="http://www.kernel.org/pub/" >>>>>>> BR2_GNU_MIRROR="http://ftp.gnu.org/pub/gnu" >>>>>>> BR2_DEBIAN_MIRROR="http://ftp.debian.org" >>>>>>> BR2_JLEVEL=2 >>>>>>> # BR2_CCACHE is not set >>>>>>> # BR2_DEPRECATED is not set >>>>>>> # BR2_ENABLE_DEBUG is not set >>>>>>> BR2_STRIP_strip=y >>>>>>> # BR2_STRIP_sstrip is not set >>>>>>> # BR2_STRIP_none is not set >>>>>>> # BR2_OPTIMIZE_0 is not set >>>>>>> # BR2_OPTIMIZE_1 is not set >>>>>>> # BR2_OPTIMIZE_2 is not set >>>>>>> # BR2_OPTIMIZE_3 is not set >>>>>>> BR2_OPTIMIZE_S=y >>>>>>> # BR2_PREFER_STATIC_LIB is not set >>>>>>> # BR2_HAVE_DOCUMENTATION is not set >>>>>>> # BR2_HAVE_DEVFILES is not set >>>>>>> >>>>>>> # >>>>>>> # Toolchain >>>>>>> # >>>>>>> BR2_TOOLCHAIN_BUILDROOT=y >>>>>>> # BR2_TOOLCHAIN_EXTERNAL is not set >>>>>>> # BR2_TOOLCHAIN_CTNG is not set >>>>>>> >>>>>>> # >>>>>>> # Kernel Header Options >>>>>>> # >>>>>>> # BR2_KERNEL_HEADERS_2_6_35 is not set >>>>>>> # BR2_KERNEL_HEADERS_2_6_36 is not set >>>>>>> # BR2_KERNEL_HEADERS_2_6_37 is not set >>>>>>> # BR2_KERNEL_HEADERS_2_6_38 is not set >>>>>>> # BR2_KERNEL_HEADERS_2_6_39 is not set >>>>>>> BR2_KERNEL_HEADERS_3_0=y >>>>>>> # BR2_KERNEL_HEADERS_VERSION is not set >>>>>>> # BR2_KERNEL_HEADERS_SNAP is not set >>>>>>> BR2_DEFAULT_KERNEL_HEADERS="3.0.4" >>>>>>> >>>>>>> # >>>>>>> # uClibc Options >>>>>>> # >>>>>>> # BR2_UCLIBC_VERSION_0_9_31 is not set >>>>>>> BR2_UCLIBC_VERSION_0_9_32=y >>>>>>> # BR2_UCLIBC_VERSION_SNAPSHOT is not set >>>>>>> BR2_UCLIBC_VERSION_STRING="0.9.32" >>>>>>> BR2_UCLIBC_CONFIG="toolchain/uClibc/uClibc-0.9.32.config" >>>>>>> # BR2_PTHREAD_DEBUG is not set >>>>>>> # BR2_UCLIBC_INSTALL_TEST_SUITE is not set >>>>>>> >>>>>>> # >>>>>>> # Binutils Options >>>>>>> # >>>>>>> # BR2_BINUTILS_VERSION_2_20 is not set >>>>>>> BR2_BINUTILS_VERSION_2_20_1=y >>>>>>> # BR2_BINUTILS_VERSION_2_21 is not set >>>>>>> # BR2_BINUTILS_VERSION_2_21_1 is not set >>>>>>> BR2_BINUTILS_VERSION="2.20.1" >>>>>>> BR2_BINUTILS_EXTRA_CONFIG_OPTIONS="" >>>>>>> >>>>>>> # >>>>>>> # GCC Options >>>>>>> # >>>>>>> # BR2_GCC_VERSION_4_2_4 is not set >>>>>>> BR2_GCC_VERSION_4_3_X=y >>>>>>> # BR2_GCC_VERSION_4_4_X is not set >>>>>>> # BR2_GCC_VERSION_4_5_X is not set >>>>>>> # BR2_GCC_VERSION_4_6_X is not set >>>>>>> # BR2_GCC_VERSION_SNAP is not set >>>>>>> BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE=y >>>>>>> BR2_GCC_VERSION="4.3.6" >>>>>>> BR2_EXTRA_GCC_CONFIG_OPTIONS="" >>>>>>> # BR2_INSTALL_OBJC is not set >>>>>>> # BR2_INSTALL_FORTRAN is not set >>>>>>> # BR2_GCC_SHARED_LIBGCC is not set >>>>>>> # BR2_GCC_ENABLE_OPENMP is not set >>>>>>> >>>>>>> # >>>>>>> # Gdb Options >>>>>>> # >>>>>>> BR2_PACKAGE_GDB=y >>>>>>> BR2_PACKAGE_GDB_SERVER=y >>>>>>> # BR2_PACKAGE_GDB_HOST is not set >>>>>>> # BR2_GDB_VERSION_6_7_1 is not set >>>>>>> BR2_GDB_VERSION_6_8=y >>>>>>> # BR2_GDB_VERSION_7_0_1 is not set >>>>>>> # BR2_GDB_VERSION_7_1 is not set >>>>>>> BR2_GDB_VERSION="6.8" >>>>>>> BR2_LARGEFILE=y >>>>>>> BR2_INET_IPV6=y >>>>>>> BR2_INET_RPC=y >>>>>>> BR2_USE_WCHAR=y >>>>>>> BR2_ENABLE_LOCALE=y >>>>>>> BR2_TOOLCHAIN_HAS_THREADS=y >>>>>>> BR2_TOOLCHAIN_HAS_SHADOW_PASSWORDS=y >>>>>>> # BR2_ENABLE_LOCALE_PURGE is not set >>>>>>> BR2_NEEDS_GETTEXT=y >>>>>>> BR2_NEEDS_GETTEXT_IF_LOCALE=y >>>>>>> BR2_USE_MMU=y >>>>>>> BR2_TARGET_OPTIMIZATION="-pipe" >>>>>>> BR2_TARGET_LDFLAGS="" >>>>>>> >>>>>>> # >>>>>>> # Toolchain Options >>>>>>> # >>>>>>> BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y >>>>>>> BR2_TOOLCHAIN_BUILDROOT_INET_IPV6=y >>>>>>> BR2_TOOLCHAIN_BUILDROOT_INET_RPC=y >>>>>>> BR2_TOOLCHAIN_BUILDROOT_WCHAR=y >>>>>>> BR2_TOOLCHAIN_BUILDROOT_LOCALE=y >>>>>>> # BR2_TOOLCHAIN_BUILDROOT_CXX is not set >>>>>>> # BR2_TOOLCHAIN_BUILDROOT_USE_SSP is not set >>>>>>> # BR2_PTHREADS_NONE is not set >>>>>>> # BR2_PTHREADS is not set >>>>>>> BR2_PTHREADS_OLD=y >>>>>>> # BR2_PTHREADS_NATIVE is not set >>>>>>> >>>>>>> # >>>>>>> # System configuration >>>>>>> # >>>>>>> BR2_TARGET_GENERIC_HOSTNAME="buildroot" >>>>>>> BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot" >>>>>>> BR2_ROOTFS_DEVICE_CREATION_STATIC=y >>>>>>> # BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS is not set >>>>>>> # BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV is not set >>>>>>> # BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV is not set >>>>>>> BR2_ROOTFS_DEVICE_TABLE="target/generic/device_table.txt" >>>>>>> BR2_ROOTFS_STATIC_DEVICE_TABLE="target/generic/device_table_dev.txt" >>>>>>> BR2_ROOTFS_SKELETON_DEFAULT=y >>>>>>> # BR2_ROOTFS_SKELETON_CUSTOM is not set >>>>>>> BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" >>>>>>> # BR2_TARGET_GENERIC_GETTY_BAUDRATE_KEEP is not set >>>>>>> # BR2_TARGET_GENERIC_GETTY_BAUDRATE_9600 is not set >>>>>>> # BR2_TARGET_GENERIC_GETTY_BAUDRATE_19200 is not set >>>>>>> # BR2_TARGET_GENERIC_GETTY_BAUDRATE_38400 is not set >>>>>>> # BR2_TARGET_GENERIC_GETTY_BAUDRATE_57600 is not set >>>>>>> BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200=y >>>>>>> BR2_TARGET_GENERIC_GETTY_BAUDRATE="115200" >>>>>>> BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW=y >>>>>>> BR2_ROOTFS_POST_BUILD_SCRIPT="custom/copy_etc.sh" >>>>>>> >>>>>>> # >>>>>>> # Package Selection for the target >>>>>>> # >>>>>>> BR2_PACKAGE_BUSYBOX=y >>>>>>> # BR2_BUSYBOX_VERSION_1_16_X is not set >>>>>>> # BR2_BUSYBOX_VERSION_1_17_X is not set >>>>>>> BR2_BUSYBOX_VERSION_1_18_X=y >>>>>>> # BR2_PACKAGE_BUSYBOX_SNAPSHOT is not set >>>>>>> BR2_BUSYBOX_VERSION="1.18.5" >>>>>>> BR2_PACKAGE_BUSYBOX_CONFIG="vortex86/busybox.config" >>>>>>> BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y >>>>>>> # BR2_PACKAGE_CUSTOMIZE is not set >>>>>>> >>>>>>> # >>>>>>> # Audio and video libraries and applications >>>>>>> # >>>>>>> # BR2_PACKAGE_ALSA_LIB is not set >>>>>>> # BR2_PACKAGE_ALSA_UTILS is not set >>>>>>> # BR2_PACKAGE_AUMIX is not set >>>>>>> # BR2_PACKAGE_FAAD2 is not set >>>>>>> # BR2_PACKAGE_FLAC is not set >>>>>>> # BR2_PACKAGE_FFMPEG is not set >>>>>>> # BR2_PACKAGE_GSTREAMER is not set >>>>>>> # BR2_PACKAGE_LAME is not set >>>>>>> # BR2_PACKAGE_LIBAO is not set >>>>>>> # BR2_PACKAGE_LIBCDAUDIO is not set >>>>>>> # BR2_PACKAGE_LIBCUE is not set >>>>>>> # BR2_PACKAGE_LIBCUEFILE is not set >>>>>>> # BR2_PACKAGE_LIBDVDREAD is not set >>>>>>> # BR2_PACKAGE_LIBDVDNAV is not set >>>>>>> # BR2_PACKAGE_LIBID3TAG is not set >>>>>>> # BR2_PACKAGE_LIBMAD is not set >>>>>>> # BR2_PACKAGE_LIBMMS is not set >>>>>>> # BR2_PACKAGE_LIBMPD is not set >>>>>>> # BR2_PACKAGE_LIBMPEG2 is not set >>>>>>> # BR2_PACKAGE_LIBOGG is not set >>>>>>> # BR2_PACKAGE_LIBREPLAYGAIN is not set >>>>>>> # BR2_PACKAGE_LIBSAMPLERATE is not set >>>>>>> # BR2_PACKAGE_LIBSNDFILE is not set >>>>>>> # BR2_PACKAGE_LIBTHEORA is not set >>>>>>> # BR2_PACKAGE_LIBVORBIS is not set >>>>>>> >>>>>>> # >>>>>>> # Live555 needs C++ compiler >>>>>>> # >>>>>>> # BR2_PACKAGE_MADPLAY is not set >>>>>>> >>>>>>> # >>>>>>> # mpd requires a toolchain with C++ and WCHAR support >>>>>>> # >>>>>>> # BR2_PACKAGE_MPG123 is not set >>>>>>> # BR2_PACKAGE_MPLAYER is not set >>>>>>> # BR2_PACKAGE_MUSEPACK is not set >>>>>>> # BR2_PACKAGE_SPEEX is not set >>>>>>> >>>>>>> # >>>>>>> # swfdec requires a toolchain with WCHAR and C++ support >>>>>>> # >>>>>>> >>>>>>> # >>>>>>> # taglib requires a toolchain with C++ support enabled >>>>>>> # >>>>>>> # BR2_PACKAGE_TREMOR is not set >>>>>>> # BR2_PACKAGE_VORBIS_TOOLS is not set >>>>>>> # BR2_PACKAGE_WAVPACK is not set >>>>>>> >>>>>>> # >>>>>>> # Compressors and decompressors >>>>>>> # >>>>>>> # BR2_PACKAGE_BZIP2 is not set >>>>>>> # BR2_PACKAGE_GZIP is not set >>>>>>> # BR2_PACKAGE_LZOP is not set >>>>>>> # BR2_PACKAGE_XZ is not set >>>>>>> >>>>>>> # >>>>>>> # Debugging, profiling and benchmark >>>>>>> # >>>>>>> >>>>>>> # >>>>>>> # bonnie++ requires a toolchain with C++ support enabled >>>>>>> # >>>>>>> BR2_PACKAGE_DHRYSTONE=y >>>>>>> # BR2_PACKAGE_DMALLOC is not set >>>>>>> # BR2_PACKAGE_KEXEC is not set >>>>>>> BR2_PACKAGE_LMBENCH=y >>>>>>> BR2_PACKAGE_LSOF=y >>>>>>> # BR2_PACKAGE_LTP_TESTSUITE is not set >>>>>>> BR2_PACKAGE_LTRACE=y >>>>>>> BR2_PACKAGE_MEMSTAT=y >>>>>>> # BR2_PACKAGE_NETPERF is not set >>>>>>> >>>>>>> # >>>>>>> # oprofile requires a toolchain with C++ support enabled >>>>>>> # >>>>>>> BR2_PACKAGE_STRACE=y >>>>>>> # BR2_PACKAGE_WHETSTONE is not set >>>>>>> # BR2_PACKAGE_VALGRIND is not set >>>>>>> >>>>>>> # >>>>>>> # Development tools >>>>>>> # >>>>>>> # BR2_PACKAGE_AUTOCONF is not set >>>>>>> # BR2_PACKAGE_AUTOMAKE is not set >>>>>>> # BR2_PACKAGE_BINUTILS is not set >>>>>>> # BR2_PACKAGE_BISON is not set >>>>>>> # BR2_PACKAGE_BSDIFF is not set >>>>>>> # BR2_PACKAGE_CCACHE is not set >>>>>>> # BR2_PACKAGE_COREUTILS is not set >>>>>>> # BR2_PACKAGE_CVS is not set >>>>>>> # BR2_PACKAGE_DIFFUTILS is not set >>>>>>> # BR2_PACKAGE_DISTCC is not set >>>>>>> # BR2_PACKAGE_FINDUTILS is not set >>>>>>> # BR2_PACKAGE_FLEX is not set >>>>>>> # BR2_PACKAGE_GAWK is not set >>>>>>> >>>>>>> # >>>>>>> # gcc needs development files in target filesystem >>>>>>> # >>>>>>> # BR2_PACKAGE_GETTEXT is not set >>>>>>> # BR2_PACKAGE_LIBINTL is not set >>>>>>> # BR2_PACKAGE_GMP is not set >>>>>>> >>>>>>> # >>>>>>> # gperf requires a toolchain with C++ support enabled >>>>>>> # >>>>>>> # BR2_PACKAGE_GREP is not set >>>>>>> # BR2_PACKAGE_MAKE is not set >>>>>>> # BR2_PACKAGE_MPC is not set >>>>>>> # BR2_PACKAGE_MPFR is not set >>>>>>> # BR2_PACKAGE_LIBTOOL is not set >>>>>>> # BR2_PACKAGE_M4 is not set >>>>>>> # BR2_PACKAGE_PATCH is not set >>>>>>> # BR2_PACKAGE_PKG_CONFIG is not set >>>>>>> # BR2_PACKAGE_SED is not set >>>>>>> # BR2_PACKAGE_SSTRIP is not set >>>>>>> # BR2_PACKAGE_TAR is not set >>>>>>> >>>>>>> # >>>>>>> # Games >>>>>>> # >>>>>>> # BR2_PACKAGE_GNUCHESS is not set >>>>>>> # BR2_PACKAGE_PRBOOM is not set >>>>>>> >>>>>>> # >>>>>>> # Graphic libraries and applications (graphic/text) >>>>>>> # >>>>>>> >>>>>>> # >>>>>>> # Graphic applications >>>>>>> # >>>>>>> # BR2_PACKAGE_RRDTOOL is not set >>>>>>> >>>>>>> # >>>>>>> # graphic libraries >>>>>>> # >>>>>>> # BR2_PACKAGE_DIRECTFB is not set >>>>>>> # BR2_PACKAGE_FBDUMP is not set >>>>>>> # BR2_PACKAGE_FBGRAB is not set >>>>>>> # BR2_PACKAGE_FBSET is not set >>>>>>> # BR2_PACKAGE_FBV is not set >>>>>>> # BR2_PACKAGE_IMAGEMAGICK is not set >>>>>>> # BR2_PACKAGE_LINUX_FUSION is not set >>>>>>> # BR2_PACKAGE_SDL is not set >>>>>>> >>>>>>> # >>>>>>> # other GUIs >>>>>>> # >>>>>>> >>>>>>> # >>>>>>> # qt requires a toolchain with C++ support enabled >>>>>>> # >>>>>>> # BR2_PACKAGE_XORG7 is not set >>>>>>> >>>>>>> # >>>>>>> # X libraries and helper libraries >>>>>>> # >>>>>>> # BR2_PACKAGE_LIBERATION is not set >>>>>>> >>>>>>> # >>>>>>> # X Window managers >>>>>>> # >>>>>>> >>>>>>> # >>>>>>> # X applications >>>>>>> # >>>>>>> # BR2_PACKAGE_GOB2 is not set >>>>>>> >>>>>>> # >>>>>>> # midori requires C++, WCHAR in toolchain and libgtk2 >>>>>>> # >>>>>>> >>>>>>> # >>>>>>> # Hardware handling >>>>>>> # >>>>>>> # BR2_PACKAGE_ACPID is not set >>>>>>> # BR2_PACKAGE_CDRKIT is not set >>>>>>> # BR2_PACKAGE_CRAMFS is not set >>>>>>> >>>>>>> # >>>>>>> # dbus not available (need expat or libxml2) >>>>>>> # >>>>>>> # BR2_PACKAGE_DMRAID is not set >>>>>>> # BR2_PACKAGE_DOSFSTOOLS is not set >>>>>>> BR2_PACKAGE_E2FSPROGS=y >>>>>>> BR2_PACKAGE_E2FSPROGS_BADBLOCKS=y >>>>>>> BR2_PACKAGE_E2FSPROGS_CHATTR=y >>>>>>> # BR2_PACKAGE_E2FSPROGS_DEBUGFS is not set >>>>>>> BR2_PACKAGE_E2FSPROGS_DUMPE2FS=y >>>>>>> BR2_PACKAGE_E2FSPROGS_E2FREEFRAG=y >>>>>>> BR2_PACKAGE_E2FSPROGS_E2FSCK=y >>>>>>> # BR2_PACKAGE_E2FSPROGS_E2IMAGE is not set >>>>>>> BR2_PACKAGE_E2FSPROGS_E2LABEL=y >>>>>>> BR2_PACKAGE_E2FSPROGS_E2UNDO=y >>>>>>> BR2_PACKAGE_E2FSPROGS_FILEFRAG=y >>>>>>> BR2_PACKAGE_E2FSPROGS_FINDFS=y >>>>>>> BR2_PACKAGE_E2FSPROGS_FSCK=y >>>>>>> BR2_PACKAGE_E2FSPROGS_LOGSAVE=y >>>>>>> BR2_PACKAGE_E2FSPROGS_LSATTR=y >>>>>>> BR2_PACKAGE_E2FSPROGS_MKE2FS=y >>>>>>> BR2_PACKAGE_E2FSPROGS_MKLOSTFOUND=y >>>>>>> # BR2_PACKAGE_E2FSPROGS_RESIZE2FS is not set >>>>>>> BR2_PACKAGE_E2FSPROGS_TUNE2FS=y >>>>>>> BR2_PACKAGE_E2FSPROGS_UUIDGEN=y >>>>>>> BR2_PACKAGE_E2FSPROGS_UUIDD=y >>>>>>> # BR2_PACKAGE_EEPROG is not set >>>>>>> # BR2_PACKAGE_FCONFIG is not set >>>>>>> # BR2_PACKAGE_FIS is not set >>>>>>> # BR2_PACKAGE_GADGETFS_TEST is not set >>>>>>> >>>>>>> # >>>>>>> # gdisk requires a toolchain with LARGEFILE/WCHAR/C++ support enabled >>>>>>> # >>>>>>> # BR2_PACKAGE_GENEXT2FS is not set >>>>>>> # BR2_PACKAGE_GENROMFS is not set >>>>>>> # BR2_PACKAGE_GPSD is not set >>>>>>> # BR2_PACKAGE_GVFS is not set >>>>>>> # BR2_PACKAGE_HDPARM is not set >>>>>>> # BR2_PACKAGE_HWDATA is not set >>>>>>> # BR2_PACKAGE_I2C_TOOLS is not set >>>>>>> # BR2_PACKAGE_INPUT_EVENT_DAEMON is not set >>>>>>> # BR2_PACKAGE_INPUT_TOOLS is not set >>>>>>> BR2_PACKAGE_IOSTAT=y >>>>>>> # BR2_PACKAGE_IRDA_UTILS is not set >>>>>>> # BR2_PACKAGE_KBD is not set >>>>>>> # BR2_PACKAGE_LIBV4L is not set >>>>>>> # BR2_PACKAGE_LM_SENSORS is not set >>>>>>> # BR2_PACKAGE_LSUIO is not set >>>>>>> # BR2_PACKAGE_LVM2 is not set >>>>>>> BR2_PACKAGE_MAKEDEVS=y >>>>>>> # BR2_PACKAGE_MDADM is not set >>>>>>> # BR2_PACKAGE_MEMTESTER is not set >>>>>>> # BR2_PACKAGE_MTD is not set >>>>>>> # BR2_PACKAGE_NTFS_3G is not set >>>>>>> # BR2_PACKAGE_NTFSPROGS is not set >>>>>>> BR2_PACKAGE_PCIUTILS=y >>>>>>> # BR2_PACKAGE_RNG_TOOLS is not set >>>>>>> # BR2_PACKAGE_SDPARM is not set >>>>>>> BR2_PACKAGE_SETSERIAL=y >>>>>>> >>>>>>> # >>>>>>> # smartmontools requires a toolchain with C++ support enabled >>>>>>> # >>>>>>> # BR2_PACKAGE_SQUASHFS is not set >>>>>>> # BR2_PACKAGE_SREDIRD is not set >>>>>>> # BR2_PACKAGE_SSHFS is not set >>>>>>> BR2_PACKAGE_STATSERIAL=y >>>>>>> # BR2_PACKAGE_SYSSTAT is not set >>>>>>> # BR2_PACKAGE_TI_UTILS is not set >>>>>>> # BR2_PACKAGE_UBOOT_TOOLS is not set >>>>>>> >>>>>>> # >>>>>>> # udev requires /dev mgmnt set to udev under System configuration >>>>>>> # >>>>>>> # BR2_PACKAGE_USB_MODESWITCH is not set >>>>>>> # BR2_PACKAGE_USBUTILS is not set >>>>>>> # BR2_PACKAGE_WIPE is not set >>>>>>> # BR2_PACKAGE_XFSPROGS is not set >>>>>>> >>>>>>> # >>>>>>> # Interpreter languages and scripting >>>>>>> # >>>>>>> # BR2_PACKAGE_HASERL is not set >>>>>>> # BR2_PACKAGE_LUA is not set >>>>>>> # BR2_PACKAGE_MICROPERL is not set >>>>>>> # BR2_PACKAGE_PHP is not set >>>>>>> # BR2_PACKAGE_PYTHON is not set >>>>>>> # BR2_PACKAGE_RUBY is not set >>>>>>> # BR2_PACKAGE_TCL is not set >>>>>>> >>>>>>> # >>>>>>> # Libraries >>>>>>> # >>>>>>> >>>>>>> # >>>>>>> # Compression and decompression >>>>>>> # >>>>>>> # BR2_PACKAGE_LIBARCHIVE is not set >>>>>>> # BR2_PACKAGE_LZO is not set >>>>>>> BR2_PACKAGE_ZLIB=y >>>>>>> >>>>>>> # >>>>>>> # Crypto >>>>>>> # >>>>>>> # BR2_PACKAGE_BEECRYPT is not set >>>>>>> # BR2_PACKAGE_GNUTLS is not set >>>>>>> # BR2_PACKAGE_LIBGCRYPT is not set >>>>>>> # BR2_PACKAGE_LIBGPG_ERROR is not set >>>>>>> # BR2_PACKAGE_LIBNSS is not set >>>>>>> # BR2_PACKAGE_OPENSSL is not set >>>>>>> >>>>>>> # >>>>>>> # Database >>>>>>> # >>>>>>> # BR2_PACKAGE_BERKELEYDB is not set >>>>>>> >>>>>>> # >>>>>>> # Mysql client requires a toolchain with C++ support enabled >>>>>>> # >>>>>>> # BR2_PACKAGE_SQLITE is not set >>>>>>> >>>>>>> # >>>>>>> # Filesystem >>>>>>> # >>>>>>> # BR2_PACKAGE_GAMIN is not set >>>>>>> # BR2_PACKAGE_LIBCONFIG is not set >>>>>>> # BR2_PACKAGE_LIBCONFUSE is not set >>>>>>> # BR2_PACKAGE_LIBFUSE is not set >>>>>>> # BR2_PACKAGE_LIBLOCKFILE is not set >>>>>>> # BR2_PACKAGE_LIBSYSFS is not set >>>>>>> >>>>>>> # >>>>>>> # Graphics >>>>>>> # >>>>>>> # BR2_PACKAGE_ATK is not set >>>>>>> # BR2_PACKAGE_CAIRO is not set >>>>>>> # BR2_PACKAGE_FONTCONFIG is not set >>>>>>> # BR2_PACKAGE_FREETYPE is not set >>>>>>> # BR2_PACKAGE_JPEG is not set >>>>>>> # BR2_PACKAGE_LIBART is not set >>>>>>> # BR2_PACKAGE_LIBEXIF is not set >>>>>>> # BR2_PACKAGE_GDK_PIXBUF is not set >>>>>>> >>>>>>> # >>>>>>> # libgtk2 requires a toolchain with WCHAR and C++ support >>>>>>> # >>>>>>> # BR2_PACKAGE_LIBPNG is not set >>>>>>> >>>>>>> # >>>>>>> # libraw requires a toolchain with C++ support enabled >>>>>>> # >>>>>>> # BR2_PACKAGE_LIBSVGTINY is not set >>>>>>> # BR2_PACKAGE_LIBUNGIF is not set >>>>>>> >>>>>>> # >>>>>>> # pango requires a toolchain with WCHAR and C++ support >>>>>>> # >>>>>>> # BR2_PACKAGE_PIXMAN is not set >>>>>>> # BR2_PACKAGE_TIFF is not set >>>>>>> >>>>>>> # >>>>>>> # webkit requires C++, WCHAR in toolchain and libgtk2 >>>>>>> # >>>>>>> >>>>>>> # >>>>>>> # Hardware handling >>>>>>> # >>>>>>> # BR2_PACKAGE_LIBAIO is not set >>>>>>> # BR2_PACKAGE_LIBRAW1394 is not set >>>>>>> # BR2_PACKAGE_TSLIB is not set >>>>>>> # BR2_PACKAGE_LIBHID is not set >>>>>>> # BR2_PACKAGE_LIBIQRF is not set >>>>>>> # BR2_PACKAGE_LIBUSB is not set >>>>>>> >>>>>>> # >>>>>>> # Networking >>>>>>> # >>>>>>> # BR2_PACKAGE_LIBCGI is not set >>>>>>> >>>>>>> # >>>>>>> # libcgicc requires a toolchain with C++ support enabled >>>>>>> # >>>>>>> # BR2_PACKAGE_LIBCURL is not set >>>>>>> # BR2_PACKAGE_LIBDNET is not set >>>>>>> # BR2_PACKAGE_LIBEXOSIP2 is not set >>>>>>> # BR2_PACKAGE_LIBIDN is not set >>>>>>> # BR2_PACKAGE_LIBMICROHTTPD is not set >>>>>>> # BR2_PACKAGE_NEON is not set >>>>>>> # BR2_PACKAGE_LIBMNL is not set >>>>>>> # BR2_PACKAGE_LIBNL is not set >>>>>>> # BR2_PACKAGE_LIBPCAP is not set >>>>>>> # BR2_PACKAGE_LIBOSIP2 is not set >>>>>>> # BR2_PACKAGE_LIBRSYNC is not set >>>>>>> # BR2_PACKAGE_LIBSOUP is not set >>>>>>> # BR2_PACKAGE_LIBUPNP is not set >>>>>>> >>>>>>> # >>>>>>> # Other >>>>>>> # >>>>>>> # BR2_PACKAGE_LIBARGTABLE2 is not set >>>>>>> # BR2_PACKAGE_ARGP_STANDALONE is not set >>>>>>> # BR2_PACKAGE_LIBATOMIC_OPS is not set >>>>>>> # BR2_PACKAGE_LIBCAP is not set >>>>>>> # BR2_PACKAGE_LIBDAEMON is not set >>>>>>> BR2_PACKAGE_LIBELF=y >>>>>>> # BR2_PACKAGE_LIBEVENT is not set >>>>>>> # BR2_PACKAGE_LIBFFI is not set >>>>>>> # BR2_PACKAGE_LIBGLIB2 is not set >>>>>>> # BR2_PACKAGE_LIBNSPR is not set >>>>>>> >>>>>>> # >>>>>>> # libsigc++ requires a toolchain with C++ support enabled >>>>>>> # >>>>>>> # BR2_PACKAGE_ORC is not set >>>>>>> >>>>>>> # >>>>>>> # Text and terminal handling >>>>>>> # >>>>>>> >>>>>>> # >>>>>>> # enchant requires a toolchain with C++ and WCHAR support enabled >>>>>>> # >>>>>>> >>>>>>> # >>>>>>> # icu requires a toolchain with C++ support and WCHAR enabled >>>>>>> # >>>>>>> BR2_PACKAGE_NCURSES=y >>>>>>> # BR2_PACKAGE_NCURSES_TARGET_PANEL is not set >>>>>>> # BR2_PACKAGE_NCURSES_TARGET_FORM is not set >>>>>>> # BR2_PACKAGE_NCURSES_TARGET_MENU is not set >>>>>>> # BR2_PACKAGE_NEWT is not set >>>>>>> # BR2_PACKAGE_PCRE is not set >>>>>>> # BR2_PACKAGE_POPT is not set >>>>>>> # BR2_PACKAGE_READLINE is not set >>>>>>> # BR2_PACKAGE_SLANG is not set >>>>>>> >>>>>>> # >>>>>>> # JSON/XML >>>>>>> # >>>>>>> # BR2_PACKAGE_EXPAT is not set >>>>>>> # BR2_PACKAGE_EZXML is not set >>>>>>> # BR2_PACKAGE_LIBROXML is not set >>>>>>> # BR2_PACKAGE_LIBXML2 is not set >>>>>>> # BR2_PACKAGE_LIBXSLT is not set >>>>>>> # BR2_PACKAGE_LIBYAML is not set >>>>>>> # BR2_PACKAGE_MXML is not set >>>>>>> >>>>>>> # >>>>>>> # xerces-c++ requires a toolchain with C++ and WCHAR support enabled >>>>>>> # >>>>>>> # BR2_PACKAGE_YAJL is not set >>>>>>> >>>>>>> # >>>>>>> # Miscellaneous >>>>>>> # >>>>>>> # BR2_PACKAGE_SHARED_MIME_INFO is not set >>>>>>> >>>>>>> # >>>>>>> # Networking applications >>>>>>> # >>>>>>> # BR2_PACKAGE_ARGUS is not set >>>>>>> # BR2_PACKAGE_AVAHI is not set >>>>>>> # BR2_PACKAGE_AXEL is not set >>>>>>> # BR2_PACKAGE_BOA is not set >>>>>>> # BR2_PACKAGE_BIND is not set >>>>>>> # BR2_PACKAGE_BMON is not set >>>>>>> # BR2_PACKAGE_BRIDGE is not set >>>>>>> # BR2_PACKAGE_BWM_NG is not set >>>>>>> # BR2_PACKAGE_CAN_UTILS is not set >>>>>>> >>>>>>> # >>>>>>> # ctorrent requires a toolchain with C++ support enabled >>>>>>> # >>>>>>> # BR2_PACKAGE_CUPS is not set >>>>>>> # BR2_PACKAGE_DHCP is not set >>>>>>> # BR2_PACKAGE_DHCPDUMP is not set >>>>>>> # BR2_PACKAGE_DNSMASQ is not set >>>>>>> BR2_PACKAGE_DROPBEAR=y >>>>>>> # BR2_PACKAGE_DROPBEAR_DISABLE_REVERSEDNS is not set >>>>>>> # BR2_PACKAGE_DROPBEAR_SMALL is not set >>>>>>> # BR2_PACKAGE_EBTABLES is not set >>>>>>> # BR2_PACKAGE_ETHTOOL is not set >>>>>>> # BR2_PACKAGE_HOSTAPD is not set >>>>>>> # BR2_PACKAGE_IFPLUGD is not set >>>>>>> >>>>>>> # >>>>>>> # iperf requires a toolchain with C++ support enabled >>>>>>> # >>>>>>> # BR2_PACKAGE_IPROUTE2 is not set >>>>>>> # BR2_PACKAGE_IPSEC_TOOLS is not set >>>>>>> # BR2_PACKAGE_IPSET is not set >>>>>>> # BR2_PACKAGE_IPTABLES is not set >>>>>>> # BR2_PACKAGE_IW is not set >>>>>>> >>>>>>> # >>>>>>> # Kismet requires a toolchain with C++ support enabled >>>>>>> # >>>>>>> # BR2_PACKAGE_XL2TP is not set >>>>>>> # BR2_PACKAGE_LIGHTTPD is not set >>>>>>> # BR2_PACKAGE_LINKS is not set >>>>>>> # BR2_PACKAGE_LRZSZ is not set >>>>>>> # BR2_PACKAGE_MII_DIAG is not set >>>>>>> # BR2_PACKAGE_MROUTED is not set >>>>>>> # BR2_PACKAGE_MUTT is not set >>>>>>> # BR2_PACKAGE_NBD is not set >>>>>>> # BR2_PACKAGE_NCFTP is not set >>>>>>> # BR2_PACKAGE_NETCAT is not set >>>>>>> # BR2_PACKAGE_NETKITBASE is not set >>>>>>> # BR2_PACKAGE_NETKITTELNET is not set >>>>>>> # BR2_PACKAGE_NETPLUG is not set >>>>>>> # BR2_PACKAGE_NETSNMP is not set >>>>>>> # BR2_PACKAGE_NETSTAT_NAT is not set >>>>>>> # BR2_PACKAGE_NFS_UTILS is not set >>>>>>> # BR2_PACKAGE_NGIRCD is not set >>>>>>> BR2_PACKAGE_NTP=y >>>>>>> # BR2_PACKAGE_NTP_SNTP is not set >>>>>>> # BR2_PACKAGE_NTP_NTP_KEYGEN is not set >>>>>>> BR2_PACKAGE_NTP_NTPD=y >>>>>>> BR2_PACKAGE_NTP_NTPDATE=y >>>>>>> # BR2_PACKAGE_NTP_NTPDC is not set >>>>>>> BR2_PACKAGE_NTP_NTPQ=y >>>>>>> BR2_PACKAGE_NTP_TICKADJ=y >>>>>>> # BR2_PACKAGE_NUTTCP is not set >>>>>>> # BR2_PACKAGE_OLSR is not set >>>>>>> # BR2_PACKAGE_OPENNTPD is not set >>>>>>> # BR2_PACKAGE_OPENSSH is not set >>>>>>> # BR2_PACKAGE_OPENVPN is not set >>>>>>> # BR2_PACKAGE_PORTMAP is not set >>>>>>> # BR2_PACKAGE_PPPD is not set >>>>>>> # BR2_PACKAGE_RADVD is not set >>>>>>> # BR2_PACKAGE_PPTP_LINUX is not set >>>>>>> # BR2_PACKAGE_PROFTPD is not set >>>>>>> # BR2_PACKAGE_QUAGGA is not set >>>>>>> # BR2_PACKAGE_RSH_REDONE is not set >>>>>>> # BR2_PACKAGE_RSYNC is not set >>>>>>> # BR2_PACKAGE_SAMBA is not set >>>>>>> # BR2_PACKAGE_SER2NET is not set >>>>>>> # BR2_PACKAGE_SOCAT is not set >>>>>>> # BR2_PACKAGE_SPAWN_FCGI is not set >>>>>>> >>>>>>> # >>>>>>> # Squid requires a toolchain with C++ and IPv6 support enabled >>>>>>> # >>>>>>> # BR2_PACKAGE_STUNNEL is not set >>>>>>> # BR2_PACKAGE_TCPDUMP is not set >>>>>>> # BR2_PACKAGE_TCPREPLAY is not set >>>>>>> # BR2_PACKAGE_TFTPD is not set >>>>>>> # BR2_PACKAGE_THTTPD is not set >>>>>>> # BR2_PACKAGE_TINYHTTPD is not set >>>>>>> # BR2_PACKAGE_TN5250 is not set >>>>>>> # BR2_PACKAGE_TTCP is not set >>>>>>> # BR2_PACKAGE_UDPCAST is not set >>>>>>> # BR2_PACKAGE_VPNC is not set >>>>>>> BR2_PACKAGE_VSFTPD=y >>>>>>> # BR2_PACKAGE_VTUN is not set >>>>>>> # BR2_PACKAGE_WGET is not set >>>>>>> # BR2_PACKAGE_WIRELESS_TOOLS is not set >>>>>>> # BR2_PACKAGE_WPA_SUPPLICANT is not set >>>>>>> >>>>>>> # >>>>>>> # Package managers >>>>>>> # >>>>>>> # BR2_PACKAGE_IPKG is not set >>>>>>> >>>>>>> # >>>>>>> # rpm requires libneon with SSL, XML and ZLIB support >>>>>>> # >>>>>>> >>>>>>> # >>>>>>> # xz payload support requires a toolchain with c++ support >>>>>>> # >>>>>>> >>>>>>> # >>>>>>> # Shell and utilities >>>>>>> # >>>>>>> # BR2_PACKAGE_AT is not set >>>>>>> # BR2_PACKAGE_BASH is not set >>>>>>> # BR2_PACKAGE_DASH is not set >>>>>>> # BR2_PACKAGE_DIALOG is not set >>>>>>> # BR2_PACKAGE_FILE is not set >>>>>>> # BR2_PACKAGE_INOTIFY_TOOLS is not set >>>>>>> # BR2_PACKAGE_LOCKFILE_PROGS is not set >>>>>>> # BR2_PACKAGE_LOGROTATE is not set >>>>>>> # BR2_PACKAGE_SCREEN is not set >>>>>>> # BR2_PACKAGE_SUDO is not set >>>>>>> # BR2_PACKAGE_WHICH is not set >>>>>>> # BR2_PACKAGE_XMLSTARLET is not set >>>>>>> >>>>>>> # >>>>>>> # System tools >>>>>>> # >>>>>>> # BR2_PACKAGE_ACL is not set >>>>>>> # BR2_PACKAGE_ATTR is not set >>>>>>> # BR2_PACKAGE_BOOTUTILS is not set >>>>>>> # BR2_PACKAGE_HTOP is not set >>>>>>> # BR2_PACKAGE_MODULE_INIT_TOOLS is not set >>>>>>> # BR2_PACKAGE_PROCPS is not set >>>>>>> # BR2_PACKAGE_PSMISC is not set >>>>>>> # BR2_PACKAGE_RSYSLOG is not set >>>>>>> # BR2_PACKAGE_SYSKLOGD is not set >>>>>>> # BR2_PACKAGE_SYSVINIT is not set >>>>>>> BR2_PACKAGE_UTIL_LINUX=y >>>>>>> BR2_PACKAGE_UTIL_LINUX_MOUNT=y >>>>>>> BR2_PACKAGE_UTIL_LINUX_FSCK=y >>>>>>> # BR2_PACKAGE_UTIL_LINUX_LIBMOUNT is not set >>>>>>> BR2_PACKAGE_UTIL_LINUX_LIBUUID=y >>>>>>> # BR2_PACKAGE_UTIL_LINUX_UUIDD is not set >>>>>>> BR2_PACKAGE_UTIL_LINUX_LIBBLKID=y >>>>>>> # BR2_PACKAGE_UTIL_LINUX_AGETTY is not set >>>>>>> # BR2_PACKAGE_UTIL_LINUX_CRAMFS is not set >>>>>>> # BR2_PACKAGE_UTIL_LINUX_SWITCH_ROOT is not set >>>>>>> # BR2_PACKAGE_UTIL_LINUX_PIVOT_ROOT is not set >>>>>>> # BR2_PACKAGE_UTIL_LINUX_FALLOCATE is not set >>>>>>> # BR2_PACKAGE_UTIL_LINUX_UNSHARE is not set >>>>>>> # BR2_PACKAGE_UTIL_LINUX_RENAME is not set >>>>>>> # BR2_PACKAGE_UTIL_LINUX_SCHEDUTILS is not set >>>>>>> # BR2_PACKAGE_UTIL_LINUX_WALL is not set >>>>>>> # BR2_PACKAGE_UTIL_LINUX_ARCH is not set >>>>>>> # BR2_PACKAGE_UTIL_LINUX_INIT is not set >>>>>>> # BR2_PACKAGE_UTIL_LINUX_KILL is not set >>>>>>> # BR2_PACKAGE_UTIL_LINUX_LAST is not set >>>>>>> # BR2_PACKAGE_UTIL_LINUX_MESG is not set >>>>>>> # BR2_PACKAGE_UTIL_LINUX_PARTX is not set >>>>>>> # BR2_PACKAGE_UTIL_LINUX_RAW is not set >>>>>>> # BR2_PACKAGE_UTIL_LINUX_RESET is not set >>>>>>> # BR2_PACKAGE_UTIL_LINUX_LOGIN_UTILS is not set >>>>>>> # BR2_PACKAGE_UTIL_LINUX_WRITE is not set >>>>>>> >>>>>>> # >>>>>>> # Text editors and viewers >>>>>>> # >>>>>>> # BR2_PACKAGE_ED is not set >>>>>>> # BR2_PACKAGE_LESS is not set >>>>>>> BR2_PACKAGE_NANO=y >>>>>>> # BR2_PACKAGE_UEMACS is not set >>>>>>> # BR2_PACKAGE_VIM is not set >>>>>>> >>>>>>> # >>>>>>> # Filesystem images >>>>>>> # >>>>>>> # BR2_TARGET_ROOTFS_CRAMFS is not set >>>>>>> # BR2_TARGET_ROOTFS_CLOOP is not set >>>>>>> BR2_TARGET_ROOTFS_EXT2=y >>>>>>> BR2_TARGET_ROOTFS_EXT2_BLOCKS=0 >>>>>>> BR2_TARGET_ROOTFS_EXT2_INODES=0 >>>>>>> BR2_TARGET_ROOTFS_EXT2_RESBLKS=0 >>>>>>> BR2_TARGET_ROOTFS_EXT2_NONE=y >>>>>>> # BR2_TARGET_ROOTFS_EXT2_GZIP is not set >>>>>>> # BR2_TARGET_ROOTFS_EXT2_BZIP2 is not set >>>>>>> # BR2_TARGET_ROOTFS_EXT2_LZMA is not set >>>>>>> # BR2_TARGET_ROOTFS_JFFS2 is not set >>>>>>> # BR2_TARGET_ROOTFS_UBIFS is not set >>>>>>> # BR2_TARGET_ROOTFS_SQUASHFS is not set >>>>>>> # BR2_TARGET_ROOTFS_TAR is not set >>>>>>> # BR2_TARGET_ROOTFS_CPIO is not set >>>>>>> # BR2_TARGET_ROOTFS_ISO9660 is not set >>>>>>> # BR2_TARGET_ROOTFS_INITRAMFS is not set >>>>>>> # BR2_TARGET_ROOTFS_ROMFS is not set >>>>>>> >>>>>>> # >>>>>>> # Bootloaders >>>>>>> # >>>>>>> # BR2_TARGET_BAREBOX is not set >>>>>>> # BR2_TARGET_GRUB is not set >>>>>>> BR2_TARGET_SYSLINUX=y >>>>>>> # BR2_TARGET_SYSLINUX_ISOLINUX is not set >>>>>>> # BR2_TARGET_SYSLINUX_PXELINUX is not set >>>>>>> # BR2_TARGET_UBOOT is not set >>>>>>> >>>>>>> # >>>>>>> # Kernel >>>>>>> # >>>>>>> BR2_LINUX_KERNEL=y >>>>>>> # BR2_LINUX_KERNEL_2_6_39 is not set >>>>>>> # BR2_LINUX_KERNEL_SAME_AS_HEADERS is not set >>>>>>> BR2_LINUX_KERNEL_CUSTOM_VERSION=y >>>>>>> # BR2_LINUX_KERNEL_CUSTOM_TARBALL is not set >>>>>>> # BR2_LINUX_KERNEL_CUSTOM_GIT is not set >>>>>>> BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.0.4" >>>>>>> BR2_LINUX_KERNEL_VERSION="3.0.4" >>>>>>> BR2_LINUX_KERNEL_PATCH="" >>>>>>> # BR2_LINUX_KERNEL_USE_DEFCONFIG is not set >>>>>>> BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y >>>>>>> BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="/home/marc/linux-3.0.4/.config" >>>>>>> BR2_LINUX_KERNEL_BZIMAGE=y >>>>>>> # BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM is not set >>>>>>> BR2_LINUX_KERNEL_INSTALL_TARGET=y >>>>>>> >>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> buildroot mailing list >>>>>>> buildroot at busybox.net >>>>>>> http://lists.busybox.net/mailman/listinfo/buildroot >>>>>>> >>>>> _______________________________________________ >>>>> buildroot mailing list >>>>> buildroot at busybox.net >>>>> http://lists.busybox.net/mailman/listinfo/buildroot >>>>> >>>>> >>>>> >>>> _______________________________________________ >>>> buildroot mailing list >>>> buildroot at busybox.net >>>> http://lists.busybox.net/mailman/listinfo/buildroot >>>> >>> > >