From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marc Leclerc Date: Tue, 20 Sep 2011 12:53:15 -0400 Subject: [Buildroot] Toolchain generate invalid executable format In-Reply-To: <4E78726D.4060801@signaturealpha.com> References: <4E7266AA.1000103@signaturealpha.com> <4E732E0F.6070709@signaturealpha.com> <4E73B2A8.4030507@signaturealpha.com> <4E77B4C9.5000302@signaturealpha.com> <4E78726D.4060801@signaturealpha.com> Message-ID: <4E78C4FB.2060802@signaturealpha.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hi, tried a simple helloworld app and the same problem exists. it segfaults and gdb does not recognize the file format Is there any informatiom I could pull out of either the host or the target to find the problem Regards On 2011-09-20 07:01, Marc Leclerc wrote: > Hi, > > I will try an Hello world this afternoon, gdb version is 6.8 running > on the target. > I compile my app using a makefile that has not changed in months, I > will also post my makefile later, there may be a setting that is now > required that was not before. > > BR2_PACKAGE_GDB=y > BR2_PACKAGE_GDB_SERVER=y > > Regards > Marc > > On 2011-09-20 03:41, Thomas De Schampheleire wrote: >> Hi, >> >> On Mon, Sep 19, 2011 at 11:31 PM, Marc Leclerc >> wrote: >>> Hi, >>> >>> first thanks for your time, appreciated. >>> >>> I was under the impression that the environement (target) was built >>> using >>> the downloaded toolchain and assuming this, shouldn't the >>> applications built >>> with the toolchain have problem as well. >> It depends on what the underlying problem is. Maybe your application >> does something 'special' that is interpreted differently now. >> >> How do you compile your application? >> Did you try compiling a hello world application in exactly the same >> way as you build your application? >> >>> I have tried loading the application with gdb which tell me the file is >>> invalid format. >> Which gdb are you using and where are you running it? >> Your buildroot configuration does not show a gdb for the host being >> built, so I assume you are using the target gdb on your host, or the >> target gdb on target. >> I have to say that I'm unfamiliar with embedded development on x86 >> targets, so I can only try to guide you in general ways. >> >> Best regards, >> Thomas >> >>> The target is a Vortex86DX and has a floating point unit. >>> >>> Both executable also runs on my host (i5) >>> >>> The only difference in gcc -v output are paths and gcc version >>> (4.3.5 vs >>> 4.3.6) and --disable-libomp >>> >>> Does any of this makes sence? >>> >>> Regards >>> Marc >>> >>> On 2011-09-17 07:12, Thomas De Schampheleire wrote: >>>> Hi, >>>> >>>> On Fri, Sep 16, 2011 at 10:33 PM, Marc Leclerc >>>> wrote: >>>>> If it may help here is the -v output of the gcc compiler and >>>>> output from >>>>> compiling my app >>>>> >>>>> Thanks >>>> At least on my host, both apps you sent run fine. The 'file' command >>>> also shows that both apps are built for i486 (I was thinking you had a >>>> binary for the wrong architecture). >>>> >>>> If you get a specific invalid instruction exception, you should try to >>>> figure out which instruction it is. An example could be that your new >>>> app is compiled with hardware-floating point instructions, while your >>>> processor doesn't have such floating point unit. >>>> >>>> It's a good idea to compare the output you gave below for both your >>>> toolchains, and see if there is a difference... >>>> >>>> Thomas >>>> >>>>> marc at Vostro-Linux:~/Smartlinks/DNP3/sa_DNP3$ i486-linux-gcc -v >>>>> Using built-in specs. >>>>> Target: i486-unknown-linux-uclibc >>>>> Configured with: >>>>> /home/marc/buildroot/output/toolchain/gcc-4.3.6/configure >>>>> --prefix=/home/marc/buildroot/output/host/usr >>>>> --build=i686-pc-linux-gnu >>>>> --host=i686-pc-linux-gnu --target=i486-unknown-linux-uclibc >>>>> --enable-languages=c >>>>> >>>>> --with-sysroot=/home/marc/buildroot/output/host/usr/i486-unknown-linux-uclibc/sysroot >>>>> >>>>> >>>>> --with-build-time-tools=/home/marc/buildroot/output/host/usr/i486-unknown-linux-uclibc/bin >>>>> >>>>> --disable-__cxa_atexit --enable-target-optspace --disable-libgomp >>>>> --with-gnu-ld --disable-libssp --disable-multilib --disable-tls >>>>> --disable-shared --with-gmp=/home/marc/buildroot/output/host/usr >>>>> --with-mpfr=/home/marc/buildroot/output/host/usr --enable-threads >>>>> --disable-decimal-float --with-arch=i486 --with-tune=i486 >>>>> --with-pkgversion='Buildroot 2011.08' >>>>> --with-bugurl=http://bugs.buildroot.net/ >>>>> Thread model: posix >>>>> gcc version 4.3.6 (Buildroot 2011.08) >>>>> marc at Vostro-Linux:~/Smartlinks/DNP3/sa_DNP3$ make >>>>> i486-linux-gcc -c -g -I ../ -I ../../sa_shared/ -DTMW_LINUX_TARGET >>>>> -DSA_DNP3 >>>>> \ >>>>> -oobj_gcc/sa_DNP3.o \ >>>>> sa_DNP3.c >>>>> i486-linux-gcc -c -g -I ../ -I ../../sa_shared/ -DTMW_LINUX_TARGET >>>>> -DSA_DNP3 \ >>>>> \ >>>>> -oobj_gcc/vdx_gpio.o \ >>>>> ../../sa_shared/vdx_gpio.c >>>>> i486-linux-gcc -c -g -I ../ -I ../../sa_shared/ -DTMW_LINUX_TARGET >>>>> -DSA_DNP3 \ >>>>> \ >>>>> -oobj_gcc/vdx_isaio.o \ >>>>> ../../sa_shared/vdx_isaio.c >>>>> i486-linux-gcc -c -g -I ../ -I ../../sa_shared/ -DTMW_LINUX_TARGET >>>>> -DSA_DNP3 \ >>>>> \ >>>>> -oobj_gcc/sa_simulate.o \ >>>>> ../../sa_shared/sa_simulate.c >>>>> i486-linux-gcc -c -g -I ../ -I ../../sa_shared/ -DTMW_LINUX_TARGET >>>>> -DSA_DNP3 \ >>>>> \ >>>>> -oobj_gcc/sa_comtrade.o \ >>>>> ../../sa_shared/sa_comtrade.c >>>>> i486-linux-gcc -c -g -I ../ -I ../../sa_shared/ -DTMW_LINUX_TARGET >>>>> -DSA_DNP3 \ >>>>> \ >>>>> -oobj_gcc/sa_calculation.o \ >>>>> ../../sa_shared/sa_calculation.c >>>>> i486-linux-gcc -c -g -I ../ -I ../../sa_shared/ -DTMW_LINUX_TARGET >>>>> -DSA_DNP3 \ >>>>> \ >>>>> -oobj_gcc/sa_config.o \ >>>>> ../../sa_shared/sa_config.c >>>>> i486-linux-gcc -g -static -o ../bin/sa_DNP3 \ >>>>> obj_gcc/sa_DNP3.o \ >>>>> obj_gcc/vdx_gpio.o \ >>>>> obj_gcc/vdx_isaio.o \ >>>>> obj_gcc/sa_simulate.o \ >>>>> obj_gcc/sa_comtrade.o \ >>>>> obj_gcc/sa_calculation.o \ >>>>> obj_gcc/sa_config.o \ >>>>> ../tmwscl/dnp.lib ../tmwscl/utils.lib ../liniotarg.lib -lpthread >>>>> >>>>> >>>>> >>>>> On 2011-09-16 07:07, Marc Leclerc wrote: >>>>>> Hi, >>>>>> >>>>>> BR2_i386=y >>>>>> BR2_x86_i486=y >>>>>> >>>>>> >>>>>> BR2_GCC_TARGET_TUNE="i486" >>>>>> BR2_GCC_TARGET_ARCH="i486" >>>>>> >>>>>> Thanks >>>>>> >>>>>> On 2011-09-16 01:36, Thomas De Schampheleire wrote: >>>>>>> Hi, >>>>>>> >>>>>>> On Thu, Sep 15, 2011 at 10:57 PM, Marc Leclerc >>>>>>> wrote: >>>>>>>> Hi, >>>>>>>> >>>>>>>> Finally got a working environment after going back to the >>>>>>>> version of >>>>>>>> tools I >>>>>>>> had on my previous setup beside the kernel (now 3.0.4) >>>>>>>> >>>>>>>> One big problem though when I compile my application from my >>>>>>>> workstation >>>>>>>> using the buildroot toolchain it no longer runs on my target >>>>>>>> leaving >>>>>>>> an >>>>>>>> illegal instruction message. gdb (6.8) say the file format is not >>>>>>>> recognized. if i take the same app compiled with my previous >>>>>>>> setup it >>>>>>>> runs >>>>>>>> fine (no changes have been made to the source, only had to >>>>>>>> change the >>>>>>>> PATH >>>>>>>> (to the compiler) since it changed from the buildroot version I >>>>>>>> was >>>>>>>> using. >>>>>>> What architecture is your target? >>>>>>> What is the output of 'file' ? >>>>>>> >>>>>>>> Here is my buildroot .config, hopefully this is only caused by a >>>>>>>> change >>>>>>>> in >>>>>>>> default configuration >>>>>>>> >>>>>>>> Thanks >>>>>>>> >>>>>>>> # >>>>>>>> # Automatically generated make config: don't edit >>>>>>>> # Buildroot 2011.08 Configuration >>>>>>>> # Thu Sep 15 14:57:25 2011 >>>>>>>> # >>>>>>>> BR2_HAVE_DOT_CONFIG=y >>>>>>>> # BR2_arm is not set >>>>>>>> # BR2_armeb is not set >>>>>>>> # BR2_avr32 is not set >>>>>>>> # BR2_bfin is not set >>>>>>>> BR2_i386=y >>>>>>>> # BR2_mips is not set >>>>>>>> # BR2_mipsel is not set >>>>>>>> # BR2_powerpc is not set >>>>>>>> # BR2_sh is not set >>>>>>>> # BR2_sh64 is not set >>>>>>>> # BR2_sparc is not set >>>>>>>> # BR2_x86_64 is not set >>>>>>>> # BR2_xtensa is not set >>>>>>>> # BR2_x86_i386 is not set >>>>>>>> BR2_x86_i486=y >>>>>>>> # BR2_x86_i586 is not set >>>>>>>> # BR2_x86_i686 is not set >>>>>>>> # BR2_x86_pentiumpro is not set >>>>>>>> # BR2_x86_pentium_mmx is not set >>>>>>>> # BR2_x86_pentium_m is not set >>>>>>>> # BR2_x86_pentium2 is not set >>>>>>>> # BR2_x86_pentium3 is not set >>>>>>>> # BR2_x86_pentium4 is not set >>>>>>>> # BR2_x86_prescott is not set >>>>>>>> # BR2_x86_nocona is not set >>>>>>>> # BR2_x86_core2 is not set >>>>>>>> # BR2_x86_k6 is not set >>>>>>>> # BR2_x86_k6_2 is not set >>>>>>>> # BR2_x86_athlon is not set >>>>>>>> # BR2_x86_athlon_4 is not set >>>>>>>> # BR2_x86_opteron is not set >>>>>>>> # BR2_x86_opteron_sse3 is not set >>>>>>>> # BR2_x86_barcelona is not set >>>>>>>> # BR2_x86_geode is not set >>>>>>>> # BR2_x86_c3 is not set >>>>>>>> # BR2_x86_c32 is not set >>>>>>>> # BR2_x86_winchip_c6 is not set >>>>>>>> # BR2_x86_winchip2 is not set >>>>>>>> BR2_ARCH="i486" >>>>>>>> BR2_ENDIAN="LITTLE" >>>>>>>> BR2_GCC_TARGET_TUNE="i486" >>>>>>>> BR2_GCC_TARGET_ARCH="i486" >>>>>>>> >>>>>>>> # >>>>>>>> # Build options >>>>>>>> # >>>>>>>> >>>>>>>> # >>>>>>>> # Commands >>>>>>>> # >>>>>>>> BR2_WGET="wget --passive-ftp -nd -t 3" >>>>>>>> BR2_SVN="svn" >>>>>>>> BR2_BZR="bzr" >>>>>>>> BR2_GIT="git" >>>>>>>> BR2_ZCAT="gzip -d -c" >>>>>>>> BR2_BZCAT="bzcat" >>>>>>>> BR2_XZCAT="xzcat" >>>>>>>> BR2_TAR_OPTIONS="" >>>>>>>> BR2_DL_DIR="$(TOPDIR)/dl" >>>>>>>> BR2_HOST_DIR="$(BASE_DIR)/host" >>>>>>>> >>>>>>>> # >>>>>>>> # Mirrors and Download locations >>>>>>>> # >>>>>>>> BR2_PRIMARY_SITE="" >>>>>>>> BR2_BACKUP_SITE="http://sources.buildroot.net/" >>>>>>>> BR2_SOURCEFORGE_MIRROR="kent" >>>>>>>> BR2_KERNEL_MIRROR="http://www.kernel.org/pub/" >>>>>>>> BR2_GNU_MIRROR="http://ftp.gnu.org/pub/gnu" >>>>>>>> BR2_DEBIAN_MIRROR="http://ftp.debian.org" >>>>>>>> BR2_JLEVEL=2 >>>>>>>> # BR2_CCACHE is not set >>>>>>>> # BR2_DEPRECATED is not set >>>>>>>> # BR2_ENABLE_DEBUG is not set >>>>>>>> BR2_STRIP_strip=y >>>>>>>> # BR2_STRIP_sstrip is not set >>>>>>>> # BR2_STRIP_none is not set >>>>>>>> # BR2_OPTIMIZE_0 is not set >>>>>>>> # BR2_OPTIMIZE_1 is not set >>>>>>>> # BR2_OPTIMIZE_2 is not set >>>>>>>> # BR2_OPTIMIZE_3 is not set >>>>>>>> BR2_OPTIMIZE_S=y >>>>>>>> # BR2_PREFER_STATIC_LIB is not set >>>>>>>> # BR2_HAVE_DOCUMENTATION is not set >>>>>>>> # BR2_HAVE_DEVFILES is not set >>>>>>>> >>>>>>>> # >>>>>>>> # Toolchain >>>>>>>> # >>>>>>>> BR2_TOOLCHAIN_BUILDROOT=y >>>>>>>> # BR2_TOOLCHAIN_EXTERNAL is not set >>>>>>>> # BR2_TOOLCHAIN_CTNG is not set >>>>>>>> >>>>>>>> # >>>>>>>> # Kernel Header Options >>>>>>>> # >>>>>>>> # BR2_KERNEL_HEADERS_2_6_35 is not set >>>>>>>> # BR2_KERNEL_HEADERS_2_6_36 is not set >>>>>>>> # BR2_KERNEL_HEADERS_2_6_37 is not set >>>>>>>> # BR2_KERNEL_HEADERS_2_6_38 is not set >>>>>>>> # BR2_KERNEL_HEADERS_2_6_39 is not set >>>>>>>> BR2_KERNEL_HEADERS_3_0=y >>>>>>>> # BR2_KERNEL_HEADERS_VERSION is not set >>>>>>>> # BR2_KERNEL_HEADERS_SNAP is not set >>>>>>>> BR2_DEFAULT_KERNEL_HEADERS="3.0.4" >>>>>>>> >>>>>>>> # >>>>>>>> # uClibc Options >>>>>>>> # >>>>>>>> # BR2_UCLIBC_VERSION_0_9_31 is not set >>>>>>>> BR2_UCLIBC_VERSION_0_9_32=y >>>>>>>> # BR2_UCLIBC_VERSION_SNAPSHOT is not set >>>>>>>> BR2_UCLIBC_VERSION_STRING="0.9.32" >>>>>>>> BR2_UCLIBC_CONFIG="toolchain/uClibc/uClibc-0.9.32.config" >>>>>>>> # BR2_PTHREAD_DEBUG is not set >>>>>>>> # BR2_UCLIBC_INSTALL_TEST_SUITE is not set >>>>>>>> >>>>>>>> # >>>>>>>> # Binutils Options >>>>>>>> # >>>>>>>> # BR2_BINUTILS_VERSION_2_20 is not set >>>>>>>> BR2_BINUTILS_VERSION_2_20_1=y >>>>>>>> # BR2_BINUTILS_VERSION_2_21 is not set >>>>>>>> # BR2_BINUTILS_VERSION_2_21_1 is not set >>>>>>>> BR2_BINUTILS_VERSION="2.20.1" >>>>>>>> BR2_BINUTILS_EXTRA_CONFIG_OPTIONS="" >>>>>>>> >>>>>>>> # >>>>>>>> # GCC Options >>>>>>>> # >>>>>>>> # BR2_GCC_VERSION_4_2_4 is not set >>>>>>>> BR2_GCC_VERSION_4_3_X=y >>>>>>>> # BR2_GCC_VERSION_4_4_X is not set >>>>>>>> # BR2_GCC_VERSION_4_5_X is not set >>>>>>>> # BR2_GCC_VERSION_4_6_X is not set >>>>>>>> # BR2_GCC_VERSION_SNAP is not set >>>>>>>> BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE=y >>>>>>>> BR2_GCC_VERSION="4.3.6" >>>>>>>> BR2_EXTRA_GCC_CONFIG_OPTIONS="" >>>>>>>> # BR2_INSTALL_OBJC is not set >>>>>>>> # BR2_INSTALL_FORTRAN is not set >>>>>>>> # BR2_GCC_SHARED_LIBGCC is not set >>>>>>>> # BR2_GCC_ENABLE_OPENMP is not set >>>>>>>> >>>>>>>> # >>>>>>>> # Gdb Options >>>>>>>> # >>>>>>>> BR2_PACKAGE_GDB=y >>>>>>>> BR2_PACKAGE_GDB_SERVER=y >>>>>>>> # BR2_PACKAGE_GDB_HOST is not set >>>>>>>> # BR2_GDB_VERSION_6_7_1 is not set >>>>>>>> BR2_GDB_VERSION_6_8=y >>>>>>>> # BR2_GDB_VERSION_7_0_1 is not set >>>>>>>> # BR2_GDB_VERSION_7_1 is not set >>>>>>>> BR2_GDB_VERSION="6.8" >>>>>>>> BR2_LARGEFILE=y >>>>>>>> BR2_INET_IPV6=y >>>>>>>> BR2_INET_RPC=y >>>>>>>> BR2_USE_WCHAR=y >>>>>>>> BR2_ENABLE_LOCALE=y >>>>>>>> BR2_TOOLCHAIN_HAS_THREADS=y >>>>>>>> BR2_TOOLCHAIN_HAS_SHADOW_PASSWORDS=y >>>>>>>> # BR2_ENABLE_LOCALE_PURGE is not set >>>>>>>> BR2_NEEDS_GETTEXT=y >>>>>>>> BR2_NEEDS_GETTEXT_IF_LOCALE=y >>>>>>>> BR2_USE_MMU=y >>>>>>>> BR2_TARGET_OPTIMIZATION="-pipe" >>>>>>>> BR2_TARGET_LDFLAGS="" >>>>>>>> >>>>>>>> # >>>>>>>> # Toolchain Options >>>>>>>> # >>>>>>>> BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y >>>>>>>> BR2_TOOLCHAIN_BUILDROOT_INET_IPV6=y >>>>>>>> BR2_TOOLCHAIN_BUILDROOT_INET_RPC=y >>>>>>>> BR2_TOOLCHAIN_BUILDROOT_WCHAR=y >>>>>>>> BR2_TOOLCHAIN_BUILDROOT_LOCALE=y >>>>>>>> # BR2_TOOLCHAIN_BUILDROOT_CXX is not set >>>>>>>> # BR2_TOOLCHAIN_BUILDROOT_USE_SSP is not set >>>>>>>> # BR2_PTHREADS_NONE is not set >>>>>>>> # BR2_PTHREADS is not set >>>>>>>> BR2_PTHREADS_OLD=y >>>>>>>> # BR2_PTHREADS_NATIVE is not set >>>>>>>> >>>>>>>> # >>>>>>>> # System configuration >>>>>>>> # >>>>>>>> BR2_TARGET_GENERIC_HOSTNAME="buildroot" >>>>>>>> BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot" >>>>>>>> BR2_ROOTFS_DEVICE_CREATION_STATIC=y >>>>>>>> # BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS is not set >>>>>>>> # BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV is not set >>>>>>>> # BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV is not set >>>>>>>> BR2_ROOTFS_DEVICE_TABLE="target/generic/device_table.txt" >>>>>>>> BR2_ROOTFS_STATIC_DEVICE_TABLE="target/generic/device_table_dev.txt" >>>>>>>> >>>>>>>> BR2_ROOTFS_SKELETON_DEFAULT=y >>>>>>>> # BR2_ROOTFS_SKELETON_CUSTOM is not set >>>>>>>> BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" >>>>>>>> # BR2_TARGET_GENERIC_GETTY_BAUDRATE_KEEP is not set >>>>>>>> # BR2_TARGET_GENERIC_GETTY_BAUDRATE_9600 is not set >>>>>>>> # BR2_TARGET_GENERIC_GETTY_BAUDRATE_19200 is not set >>>>>>>> # BR2_TARGET_GENERIC_GETTY_BAUDRATE_38400 is not set >>>>>>>> # BR2_TARGET_GENERIC_GETTY_BAUDRATE_57600 is not set >>>>>>>> BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200=y >>>>>>>> BR2_TARGET_GENERIC_GETTY_BAUDRATE="115200" >>>>>>>> BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW=y >>>>>>>> BR2_ROOTFS_POST_BUILD_SCRIPT="custom/copy_etc.sh" >>>>>>>> >>>>>>>> # >>>>>>>> # Package Selection for the target >>>>>>>> # >>>>>>>> BR2_PACKAGE_BUSYBOX=y >>>>>>>> # BR2_BUSYBOX_VERSION_1_16_X is not set >>>>>>>> # BR2_BUSYBOX_VERSION_1_17_X is not set >>>>>>>> BR2_BUSYBOX_VERSION_1_18_X=y >>>>>>>> # BR2_PACKAGE_BUSYBOX_SNAPSHOT is not set >>>>>>>> BR2_BUSYBOX_VERSION="1.18.5" >>>>>>>> BR2_PACKAGE_BUSYBOX_CONFIG="vortex86/busybox.config" >>>>>>>> BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y >>>>>>>> # BR2_PACKAGE_CUSTOMIZE is not set >>>>>>>> >>>>>>>> # >>>>>>>> # Audio and video libraries and applications >>>>>>>> # >>>>>>>> # BR2_PACKAGE_ALSA_LIB is not set >>>>>>>> # BR2_PACKAGE_ALSA_UTILS is not set >>>>>>>> # BR2_PACKAGE_AUMIX is not set >>>>>>>> # BR2_PACKAGE_FAAD2 is not set >>>>>>>> # BR2_PACKAGE_FLAC is not set >>>>>>>> # BR2_PACKAGE_FFMPEG is not set >>>>>>>> # BR2_PACKAGE_GSTREAMER is not set >>>>>>>> # BR2_PACKAGE_LAME is not set >>>>>>>> # BR2_PACKAGE_LIBAO is not set >>>>>>>> # BR2_PACKAGE_LIBCDAUDIO is not set >>>>>>>> # BR2_PACKAGE_LIBCUE is not set >>>>>>>> # BR2_PACKAGE_LIBCUEFILE is not set >>>>>>>> # BR2_PACKAGE_LIBDVDREAD is not set >>>>>>>> # BR2_PACKAGE_LIBDVDNAV is not set >>>>>>>> # BR2_PACKAGE_LIBID3TAG is not set >>>>>>>> # BR2_PACKAGE_LIBMAD is not set >>>>>>>> # BR2_PACKAGE_LIBMMS is not set >>>>>>>> # BR2_PACKAGE_LIBMPD is not set >>>>>>>> # BR2_PACKAGE_LIBMPEG2 is not set >>>>>>>> # BR2_PACKAGE_LIBOGG is not set >>>>>>>> # BR2_PACKAGE_LIBREPLAYGAIN is not set >>>>>>>> # BR2_PACKAGE_LIBSAMPLERATE is not set >>>>>>>> # BR2_PACKAGE_LIBSNDFILE is not set >>>>>>>> # BR2_PACKAGE_LIBTHEORA is not set >>>>>>>> # BR2_PACKAGE_LIBVORBIS is not set >>>>>>>> >>>>>>>> # >>>>>>>> # Live555 needs C++ compiler >>>>>>>> # >>>>>>>> # BR2_PACKAGE_MADPLAY is not set >>>>>>>> >>>>>>>> # >>>>>>>> # mpd requires a toolchain with C++ and WCHAR support >>>>>>>> # >>>>>>>> # BR2_PACKAGE_MPG123 is not set >>>>>>>> # BR2_PACKAGE_MPLAYER is not set >>>>>>>> # BR2_PACKAGE_MUSEPACK is not set >>>>>>>> # BR2_PACKAGE_SPEEX is not set >>>>>>>> >>>>>>>> # >>>>>>>> # swfdec requires a toolchain with WCHAR and C++ support >>>>>>>> # >>>>>>>> >>>>>>>> # >>>>>>>> # taglib requires a toolchain with C++ support enabled >>>>>>>> # >>>>>>>> # BR2_PACKAGE_TREMOR is not set >>>>>>>> # BR2_PACKAGE_VORBIS_TOOLS is not set >>>>>>>> # BR2_PACKAGE_WAVPACK is not set >>>>>>>> >>>>>>>> # >>>>>>>> # Compressors and decompressors >>>>>>>> # >>>>>>>> # BR2_PACKAGE_BZIP2 is not set >>>>>>>> # BR2_PACKAGE_GZIP is not set >>>>>>>> # BR2_PACKAGE_LZOP is not set >>>>>>>> # BR2_PACKAGE_XZ is not set >>>>>>>> >>>>>>>> # >>>>>>>> # Debugging, profiling and benchmark >>>>>>>> # >>>>>>>> >>>>>>>> # >>>>>>>> # bonnie++ requires a toolchain with C++ support enabled >>>>>>>> # >>>>>>>> BR2_PACKAGE_DHRYSTONE=y >>>>>>>> # BR2_PACKAGE_DMALLOC is not set >>>>>>>> # BR2_PACKAGE_KEXEC is not set >>>>>>>> BR2_PACKAGE_LMBENCH=y >>>>>>>> BR2_PACKAGE_LSOF=y >>>>>>>> # BR2_PACKAGE_LTP_TESTSUITE is not set >>>>>>>> BR2_PACKAGE_LTRACE=y >>>>>>>> BR2_PACKAGE_MEMSTAT=y >>>>>>>> # BR2_PACKAGE_NETPERF is not set >>>>>>>> >>>>>>>> # >>>>>>>> # oprofile requires a toolchain with C++ support enabled >>>>>>>> # >>>>>>>> BR2_PACKAGE_STRACE=y >>>>>>>> # BR2_PACKAGE_WHETSTONE is not set >>>>>>>> # BR2_PACKAGE_VALGRIND is not set >>>>>>>> >>>>>>>> # >>>>>>>> # Development tools >>>>>>>> # >>>>>>>> # BR2_PACKAGE_AUTOCONF is not set >>>>>>>> # BR2_PACKAGE_AUTOMAKE is not set >>>>>>>> # BR2_PACKAGE_BINUTILS is not set >>>>>>>> # BR2_PACKAGE_BISON is not set >>>>>>>> # BR2_PACKAGE_BSDIFF is not set >>>>>>>> # BR2_PACKAGE_CCACHE is not set >>>>>>>> # BR2_PACKAGE_COREUTILS is not set >>>>>>>> # BR2_PACKAGE_CVS is not set >>>>>>>> # BR2_PACKAGE_DIFFUTILS is not set >>>>>>>> # BR2_PACKAGE_DISTCC is not set >>>>>>>> # BR2_PACKAGE_FINDUTILS is not set >>>>>>>> # BR2_PACKAGE_FLEX is not set >>>>>>>> # BR2_PACKAGE_GAWK is not set >>>>>>>> >>>>>>>> # >>>>>>>> # gcc needs development files in target filesystem >>>>>>>> # >>>>>>>> # BR2_PACKAGE_GETTEXT is not set >>>>>>>> # BR2_PACKAGE_LIBINTL is not set >>>>>>>> # BR2_PACKAGE_GMP is not set >>>>>>>> >>>>>>>> # >>>>>>>> # gperf requires a toolchain with C++ support enabled >>>>>>>> # >>>>>>>> # BR2_PACKAGE_GREP is not set >>>>>>>> # BR2_PACKAGE_MAKE is not set >>>>>>>> # BR2_PACKAGE_MPC is not set >>>>>>>> # BR2_PACKAGE_MPFR is not set >>>>>>>> # BR2_PACKAGE_LIBTOOL is not set >>>>>>>> # BR2_PACKAGE_M4 is not set >>>>>>>> # BR2_PACKAGE_PATCH is not set >>>>>>>> # BR2_PACKAGE_PKG_CONFIG is not set >>>>>>>> # BR2_PACKAGE_SED is not set >>>>>>>> # BR2_PACKAGE_SSTRIP is not set >>>>>>>> # BR2_PACKAGE_TAR is not set >>>>>>>> >>>>>>>> # >>>>>>>> # Games >>>>>>>> # >>>>>>>> # BR2_PACKAGE_GNUCHESS is not set >>>>>>>> # BR2_PACKAGE_PRBOOM is not set >>>>>>>> >>>>>>>> # >>>>>>>> # Graphic libraries and applications (graphic/text) >>>>>>>> # >>>>>>>> >>>>>>>> # >>>>>>>> # Graphic applications >>>>>>>> # >>>>>>>> # BR2_PACKAGE_RRDTOOL is not set >>>>>>>> >>>>>>>> # >>>>>>>> # graphic libraries >>>>>>>> # >>>>>>>> # BR2_PACKAGE_DIRECTFB is not set >>>>>>>> # BR2_PACKAGE_FBDUMP is not set >>>>>>>> # BR2_PACKAGE_FBGRAB is not set >>>>>>>> # BR2_PACKAGE_FBSET is not set >>>>>>>> # BR2_PACKAGE_FBV is not set >>>>>>>> # BR2_PACKAGE_IMAGEMAGICK is not set >>>>>>>> # BR2_PACKAGE_LINUX_FUSION is not set >>>>>>>> # BR2_PACKAGE_SDL is not set >>>>>>>> >>>>>>>> # >>>>>>>> # other GUIs >>>>>>>> # >>>>>>>> >>>>>>>> # >>>>>>>> # qt requires a toolchain with C++ support enabled >>>>>>>> # >>>>>>>> # BR2_PACKAGE_XORG7 is not set >>>>>>>> >>>>>>>> # >>>>>>>> # X libraries and helper libraries >>>>>>>> # >>>>>>>> # BR2_PACKAGE_LIBERATION is not set >>>>>>>> >>>>>>>> # >>>>>>>> # X Window managers >>>>>>>> # >>>>>>>> >>>>>>>> # >>>>>>>> # X applications >>>>>>>> # >>>>>>>> # BR2_PACKAGE_GOB2 is not set >>>>>>>> >>>>>>>> # >>>>>>>> # midori requires C++, WCHAR in toolchain and libgtk2 >>>>>>>> # >>>>>>>> >>>>>>>> # >>>>>>>> # Hardware handling >>>>>>>> # >>>>>>>> # BR2_PACKAGE_ACPID is not set >>>>>>>> # BR2_PACKAGE_CDRKIT is not set >>>>>>>> # BR2_PACKAGE_CRAMFS is not set >>>>>>>> >>>>>>>> # >>>>>>>> # dbus not available (need expat or libxml2) >>>>>>>> # >>>>>>>> # BR2_PACKAGE_DMRAID is not set >>>>>>>> # BR2_PACKAGE_DOSFSTOOLS is not set >>>>>>>> BR2_PACKAGE_E2FSPROGS=y >>>>>>>> BR2_PACKAGE_E2FSPROGS_BADBLOCKS=y >>>>>>>> BR2_PACKAGE_E2FSPROGS_CHATTR=y >>>>>>>> # BR2_PACKAGE_E2FSPROGS_DEBUGFS is not set >>>>>>>> BR2_PACKAGE_E2FSPROGS_DUMPE2FS=y >>>>>>>> BR2_PACKAGE_E2FSPROGS_E2FREEFRAG=y >>>>>>>> BR2_PACKAGE_E2FSPROGS_E2FSCK=y >>>>>>>> # BR2_PACKAGE_E2FSPROGS_E2IMAGE is not set >>>>>>>> BR2_PACKAGE_E2FSPROGS_E2LABEL=y >>>>>>>> BR2_PACKAGE_E2FSPROGS_E2UNDO=y >>>>>>>> BR2_PACKAGE_E2FSPROGS_FILEFRAG=y >>>>>>>> BR2_PACKAGE_E2FSPROGS_FINDFS=y >>>>>>>> BR2_PACKAGE_E2FSPROGS_FSCK=y >>>>>>>> BR2_PACKAGE_E2FSPROGS_LOGSAVE=y >>>>>>>> BR2_PACKAGE_E2FSPROGS_LSATTR=y >>>>>>>> BR2_PACKAGE_E2FSPROGS_MKE2FS=y >>>>>>>> BR2_PACKAGE_E2FSPROGS_MKLOSTFOUND=y >>>>>>>> # BR2_PACKAGE_E2FSPROGS_RESIZE2FS is not set >>>>>>>> BR2_PACKAGE_E2FSPROGS_TUNE2FS=y >>>>>>>> BR2_PACKAGE_E2FSPROGS_UUIDGEN=y >>>>>>>> BR2_PACKAGE_E2FSPROGS_UUIDD=y >>>>>>>> # BR2_PACKAGE_EEPROG is not set >>>>>>>> # BR2_PACKAGE_FCONFIG is not set >>>>>>>> # BR2_PACKAGE_FIS is not set >>>>>>>> # BR2_PACKAGE_GADGETFS_TEST is not set >>>>>>>> >>>>>>>> # >>>>>>>> # gdisk requires a toolchain with LARGEFILE/WCHAR/C++ support >>>>>>>> enabled >>>>>>>> # >>>>>>>> # BR2_PACKAGE_GENEXT2FS is not set >>>>>>>> # BR2_PACKAGE_GENROMFS is not set >>>>>>>> # BR2_PACKAGE_GPSD is not set >>>>>>>> # BR2_PACKAGE_GVFS is not set >>>>>>>> # BR2_PACKAGE_HDPARM is not set >>>>>>>> # BR2_PACKAGE_HWDATA is not set >>>>>>>> # BR2_PACKAGE_I2C_TOOLS is not set >>>>>>>> # BR2_PACKAGE_INPUT_EVENT_DAEMON is not set >>>>>>>> # BR2_PACKAGE_INPUT_TOOLS is not set >>>>>>>> BR2_PACKAGE_IOSTAT=y >>>>>>>> # BR2_PACKAGE_IRDA_UTILS is not set >>>>>>>> # BR2_PACKAGE_KBD is not set >>>>>>>> # BR2_PACKAGE_LIBV4L is not set >>>>>>>> # BR2_PACKAGE_LM_SENSORS is not set >>>>>>>> # BR2_PACKAGE_LSUIO is not set >>>>>>>> # BR2_PACKAGE_LVM2 is not set >>>>>>>> BR2_PACKAGE_MAKEDEVS=y >>>>>>>> # BR2_PACKAGE_MDADM is not set >>>>>>>> # BR2_PACKAGE_MEMTESTER is not set >>>>>>>> # BR2_PACKAGE_MTD is not set >>>>>>>> # BR2_PACKAGE_NTFS_3G is not set >>>>>>>> # BR2_PACKAGE_NTFSPROGS is not set >>>>>>>> BR2_PACKAGE_PCIUTILS=y >>>>>>>> # BR2_PACKAGE_RNG_TOOLS is not set >>>>>>>> # BR2_PACKAGE_SDPARM is not set >>>>>>>> BR2_PACKAGE_SETSERIAL=y >>>>>>>> >>>>>>>> # >>>>>>>> # smartmontools requires a toolchain with C++ support enabled >>>>>>>> # >>>>>>>> # BR2_PACKAGE_SQUASHFS is not set >>>>>>>> # BR2_PACKAGE_SREDIRD is not set >>>>>>>> # BR2_PACKAGE_SSHFS is not set >>>>>>>> BR2_PACKAGE_STATSERIAL=y >>>>>>>> # BR2_PACKAGE_SYSSTAT is not set >>>>>>>> # BR2_PACKAGE_TI_UTILS is not set >>>>>>>> # BR2_PACKAGE_UBOOT_TOOLS is not set >>>>>>>> >>>>>>>> # >>>>>>>> # udev requires /dev mgmnt set to udev under System configuration >>>>>>>> # >>>>>>>> # BR2_PACKAGE_USB_MODESWITCH is not set >>>>>>>> # BR2_PACKAGE_USBUTILS is not set >>>>>>>> # BR2_PACKAGE_WIPE is not set >>>>>>>> # BR2_PACKAGE_XFSPROGS is not set >>>>>>>> >>>>>>>> # >>>>>>>> # Interpreter languages and scripting >>>>>>>> # >>>>>>>> # BR2_PACKAGE_HASERL is not set >>>>>>>> # BR2_PACKAGE_LUA is not set >>>>>>>> # BR2_PACKAGE_MICROPERL is not set >>>>>>>> # BR2_PACKAGE_PHP is not set >>>>>>>> # BR2_PACKAGE_PYTHON is not set >>>>>>>> # BR2_PACKAGE_RUBY is not set >>>>>>>> # BR2_PACKAGE_TCL is not set >>>>>>>> >>>>>>>> # >>>>>>>> # Libraries >>>>>>>> # >>>>>>>> >>>>>>>> # >>>>>>>> # Compression and decompression >>>>>>>> # >>>>>>>> # BR2_PACKAGE_LIBARCHIVE is not set >>>>>>>> # BR2_PACKAGE_LZO is not set >>>>>>>> BR2_PACKAGE_ZLIB=y >>>>>>>> >>>>>>>> # >>>>>>>> # Crypto >>>>>>>> # >>>>>>>> # BR2_PACKAGE_BEECRYPT is not set >>>>>>>> # BR2_PACKAGE_GNUTLS is not set >>>>>>>> # BR2_PACKAGE_LIBGCRYPT is not set >>>>>>>> # BR2_PACKAGE_LIBGPG_ERROR is not set >>>>>>>> # BR2_PACKAGE_LIBNSS is not set >>>>>>>> # BR2_PACKAGE_OPENSSL is not set >>>>>>>> >>>>>>>> # >>>>>>>> # Database >>>>>>>> # >>>>>>>> # BR2_PACKAGE_BERKELEYDB is not set >>>>>>>> >>>>>>>> # >>>>>>>> # Mysql client requires a toolchain with C++ support enabled >>>>>>>> # >>>>>>>> # BR2_PACKAGE_SQLITE is not set >>>>>>>> >>>>>>>> # >>>>>>>> # Filesystem >>>>>>>> # >>>>>>>> # BR2_PACKAGE_GAMIN is not set >>>>>>>> # BR2_PACKAGE_LIBCONFIG is not set >>>>>>>> # BR2_PACKAGE_LIBCONFUSE is not set >>>>>>>> # BR2_PACKAGE_LIBFUSE is not set >>>>>>>> # BR2_PACKAGE_LIBLOCKFILE is not set >>>>>>>> # BR2_PACKAGE_LIBSYSFS is not set >>>>>>>> >>>>>>>> # >>>>>>>> # Graphics >>>>>>>> # >>>>>>>> # BR2_PACKAGE_ATK is not set >>>>>>>> # BR2_PACKAGE_CAIRO is not set >>>>>>>> # BR2_PACKAGE_FONTCONFIG is not set >>>>>>>> # BR2_PACKAGE_FREETYPE is not set >>>>>>>> # BR2_PACKAGE_JPEG is not set >>>>>>>> # BR2_PACKAGE_LIBART is not set >>>>>>>> # BR2_PACKAGE_LIBEXIF is not set >>>>>>>> # BR2_PACKAGE_GDK_PIXBUF is not set >>>>>>>> >>>>>>>> # >>>>>>>> # libgtk2 requires a toolchain with WCHAR and C++ support >>>>>>>> # >>>>>>>> # BR2_PACKAGE_LIBPNG is not set >>>>>>>> >>>>>>>> # >>>>>>>> # libraw requires a toolchain with C++ support enabled >>>>>>>> # >>>>>>>> # BR2_PACKAGE_LIBSVGTINY is not set >>>>>>>> # BR2_PACKAGE_LIBUNGIF is not set >>>>>>>> >>>>>>>> # >>>>>>>> # pango requires a toolchain with WCHAR and C++ support >>>>>>>> # >>>>>>>> # BR2_PACKAGE_PIXMAN is not set >>>>>>>> # BR2_PACKAGE_TIFF is not set >>>>>>>> >>>>>>>> # >>>>>>>> # webkit requires C++, WCHAR in toolchain and libgtk2 >>>>>>>> # >>>>>>>> >>>>>>>> # >>>>>>>> # Hardware handling >>>>>>>> # >>>>>>>> # BR2_PACKAGE_LIBAIO is not set >>>>>>>> # BR2_PACKAGE_LIBRAW1394 is not set >>>>>>>> # BR2_PACKAGE_TSLIB is not set >>>>>>>> # BR2_PACKAGE_LIBHID is not set >>>>>>>> # BR2_PACKAGE_LIBIQRF is not set >>>>>>>> # BR2_PACKAGE_LIBUSB is not set >>>>>>>> >>>>>>>> # >>>>>>>> # Networking >>>>>>>> # >>>>>>>> # BR2_PACKAGE_LIBCGI is not set >>>>>>>> >>>>>>>> # >>>>>>>> # libcgicc requires a toolchain with C++ support enabled >>>>>>>> # >>>>>>>> # BR2_PACKAGE_LIBCURL is not set >>>>>>>> # BR2_PACKAGE_LIBDNET is not set >>>>>>>> # BR2_PACKAGE_LIBEXOSIP2 is not set >>>>>>>> # BR2_PACKAGE_LIBIDN is not set >>>>>>>> # BR2_PACKAGE_LIBMICROHTTPD is not set >>>>>>>> # BR2_PACKAGE_NEON is not set >>>>>>>> # BR2_PACKAGE_LIBMNL is not set >>>>>>>> # BR2_PACKAGE_LIBNL is not set >>>>>>>> # BR2_PACKAGE_LIBPCAP is not set >>>>>>>> # BR2_PACKAGE_LIBOSIP2 is not set >>>>>>>> # BR2_PACKAGE_LIBRSYNC is not set >>>>>>>> # BR2_PACKAGE_LIBSOUP is not set >>>>>>>> # BR2_PACKAGE_LIBUPNP is not set >>>>>>>> >>>>>>>> # >>>>>>>> # Other >>>>>>>> # >>>>>>>> # BR2_PACKAGE_LIBARGTABLE2 is not set >>>>>>>> # BR2_PACKAGE_ARGP_STANDALONE is not set >>>>>>>> # BR2_PACKAGE_LIBATOMIC_OPS is not set >>>>>>>> # BR2_PACKAGE_LIBCAP is not set >>>>>>>> # BR2_PACKAGE_LIBDAEMON is not set >>>>>>>> BR2_PACKAGE_LIBELF=y >>>>>>>> # BR2_PACKAGE_LIBEVENT is not set >>>>>>>> # BR2_PACKAGE_LIBFFI is not set >>>>>>>> # BR2_PACKAGE_LIBGLIB2 is not set >>>>>>>> # BR2_PACKAGE_LIBNSPR is not set >>>>>>>> >>>>>>>> # >>>>>>>> # libsigc++ requires a toolchain with C++ support enabled >>>>>>>> # >>>>>>>> # BR2_PACKAGE_ORC is not set >>>>>>>> >>>>>>>> # >>>>>>>> # Text and terminal handling >>>>>>>> # >>>>>>>> >>>>>>>> # >>>>>>>> # enchant requires a toolchain with C++ and WCHAR support enabled >>>>>>>> # >>>>>>>> >>>>>>>> # >>>>>>>> # icu requires a toolchain with C++ support and WCHAR enabled >>>>>>>> # >>>>>>>> BR2_PACKAGE_NCURSES=y >>>>>>>> # BR2_PACKAGE_NCURSES_TARGET_PANEL is not set >>>>>>>> # BR2_PACKAGE_NCURSES_TARGET_FORM is not set >>>>>>>> # BR2_PACKAGE_NCURSES_TARGET_MENU is not set >>>>>>>> # BR2_PACKAGE_NEWT is not set >>>>>>>> # BR2_PACKAGE_PCRE is not set >>>>>>>> # BR2_PACKAGE_POPT is not set >>>>>>>> # BR2_PACKAGE_READLINE is not set >>>>>>>> # BR2_PACKAGE_SLANG is not set >>>>>>>> >>>>>>>> # >>>>>>>> # JSON/XML >>>>>>>> # >>>>>>>> # BR2_PACKAGE_EXPAT is not set >>>>>>>> # BR2_PACKAGE_EZXML is not set >>>>>>>> # BR2_PACKAGE_LIBROXML is not set >>>>>>>> # BR2_PACKAGE_LIBXML2 is not set >>>>>>>> # BR2_PACKAGE_LIBXSLT is not set >>>>>>>> # BR2_PACKAGE_LIBYAML is not set >>>>>>>> # BR2_PACKAGE_MXML is not set >>>>>>>> >>>>>>>> # >>>>>>>> # xerces-c++ requires a toolchain with C++ and WCHAR support >>>>>>>> enabled >>>>>>>> # >>>>>>>> # BR2_PACKAGE_YAJL is not set >>>>>>>> >>>>>>>> # >>>>>>>> # Miscellaneous >>>>>>>> # >>>>>>>> # BR2_PACKAGE_SHARED_MIME_INFO is not set >>>>>>>> >>>>>>>> # >>>>>>>> # Networking applications >>>>>>>> # >>>>>>>> # BR2_PACKAGE_ARGUS is not set >>>>>>>> # BR2_PACKAGE_AVAHI is not set >>>>>>>> # BR2_PACKAGE_AXEL is not set >>>>>>>> # BR2_PACKAGE_BOA is not set >>>>>>>> # BR2_PACKAGE_BIND is not set >>>>>>>> # BR2_PACKAGE_BMON is not set >>>>>>>> # BR2_PACKAGE_BRIDGE is not set >>>>>>>> # BR2_PACKAGE_BWM_NG is not set >>>>>>>> # BR2_PACKAGE_CAN_UTILS is not set >>>>>>>> >>>>>>>> # >>>>>>>> # ctorrent requires a toolchain with C++ support enabled >>>>>>>> # >>>>>>>> # BR2_PACKAGE_CUPS is not set >>>>>>>> # BR2_PACKAGE_DHCP is not set >>>>>>>> # BR2_PACKAGE_DHCPDUMP is not set >>>>>>>> # BR2_PACKAGE_DNSMASQ is not set >>>>>>>> BR2_PACKAGE_DROPBEAR=y >>>>>>>> # BR2_PACKAGE_DROPBEAR_DISABLE_REVERSEDNS is not set >>>>>>>> # BR2_PACKAGE_DROPBEAR_SMALL is not set >>>>>>>> # BR2_PACKAGE_EBTABLES is not set >>>>>>>> # BR2_PACKAGE_ETHTOOL is not set >>>>>>>> # BR2_PACKAGE_HOSTAPD is not set >>>>>>>> # BR2_PACKAGE_IFPLUGD is not set >>>>>>>> >>>>>>>> # >>>>>>>> # iperf requires a toolchain with C++ support enabled >>>>>>>> # >>>>>>>> # BR2_PACKAGE_IPROUTE2 is not set >>>>>>>> # BR2_PACKAGE_IPSEC_TOOLS is not set >>>>>>>> # BR2_PACKAGE_IPSET is not set >>>>>>>> # BR2_PACKAGE_IPTABLES is not set >>>>>>>> # BR2_PACKAGE_IW is not set >>>>>>>> >>>>>>>> # >>>>>>>> # Kismet requires a toolchain with C++ support enabled >>>>>>>> # >>>>>>>> # BR2_PACKAGE_XL2TP is not set >>>>>>>> # BR2_PACKAGE_LIGHTTPD is not set >>>>>>>> # BR2_PACKAGE_LINKS is not set >>>>>>>> # BR2_PACKAGE_LRZSZ is not set >>>>>>>> # BR2_PACKAGE_MII_DIAG is not set >>>>>>>> # BR2_PACKAGE_MROUTED is not set >>>>>>>> # BR2_PACKAGE_MUTT is not set >>>>>>>> # BR2_PACKAGE_NBD is not set >>>>>>>> # BR2_PACKAGE_NCFTP is not set >>>>>>>> # BR2_PACKAGE_NETCAT is not set >>>>>>>> # BR2_PACKAGE_NETKITBASE is not set >>>>>>>> # BR2_PACKAGE_NETKITTELNET is not set >>>>>>>> # BR2_PACKAGE_NETPLUG is not set >>>>>>>> # BR2_PACKAGE_NETSNMP is not set >>>>>>>> # BR2_PACKAGE_NETSTAT_NAT is not set >>>>>>>> # BR2_PACKAGE_NFS_UTILS is not set >>>>>>>> # BR2_PACKAGE_NGIRCD is not set >>>>>>>> BR2_PACKAGE_NTP=y >>>>>>>> # BR2_PACKAGE_NTP_SNTP is not set >>>>>>>> # BR2_PACKAGE_NTP_NTP_KEYGEN is not set >>>>>>>> BR2_PACKAGE_NTP_NTPD=y >>>>>>>> BR2_PACKAGE_NTP_NTPDATE=y >>>>>>>> # BR2_PACKAGE_NTP_NTPDC is not set >>>>>>>> BR2_PACKAGE_NTP_NTPQ=y >>>>>>>> BR2_PACKAGE_NTP_TICKADJ=y >>>>>>>> # BR2_PACKAGE_NUTTCP is not set >>>>>>>> # BR2_PACKAGE_OLSR is not set >>>>>>>> # BR2_PACKAGE_OPENNTPD is not set >>>>>>>> # BR2_PACKAGE_OPENSSH is not set >>>>>>>> # BR2_PACKAGE_OPENVPN is not set >>>>>>>> # BR2_PACKAGE_PORTMAP is not set >>>>>>>> # BR2_PACKAGE_PPPD is not set >>>>>>>> # BR2_PACKAGE_RADVD is not set >>>>>>>> # BR2_PACKAGE_PPTP_LINUX is not set >>>>>>>> # BR2_PACKAGE_PROFTPD is not set >>>>>>>> # BR2_PACKAGE_QUAGGA is not set >>>>>>>> # BR2_PACKAGE_RSH_REDONE is not set >>>>>>>> # BR2_PACKAGE_RSYNC is not set >>>>>>>> # BR2_PACKAGE_SAMBA is not set >>>>>>>> # BR2_PACKAGE_SER2NET is not set >>>>>>>> # BR2_PACKAGE_SOCAT is not set >>>>>>>> # BR2_PACKAGE_SPAWN_FCGI is not set >>>>>>>> >>>>>>>> # >>>>>>>> # Squid requires a toolchain with C++ and IPv6 support enabled >>>>>>>> # >>>>>>>> # BR2_PACKAGE_STUNNEL is not set >>>>>>>> # BR2_PACKAGE_TCPDUMP is not set >>>>>>>> # BR2_PACKAGE_TCPREPLAY is not set >>>>>>>> # BR2_PACKAGE_TFTPD is not set >>>>>>>> # BR2_PACKAGE_THTTPD is not set >>>>>>>> # BR2_PACKAGE_TINYHTTPD is not set >>>>>>>> # BR2_PACKAGE_TN5250 is not set >>>>>>>> # BR2_PACKAGE_TTCP is not set >>>>>>>> # BR2_PACKAGE_UDPCAST is not set >>>>>>>> # BR2_PACKAGE_VPNC is not set >>>>>>>> BR2_PACKAGE_VSFTPD=y >>>>>>>> # BR2_PACKAGE_VTUN is not set >>>>>>>> # BR2_PACKAGE_WGET is not set >>>>>>>> # BR2_PACKAGE_WIRELESS_TOOLS is not set >>>>>>>> # BR2_PACKAGE_WPA_SUPPLICANT is not set >>>>>>>> >>>>>>>> # >>>>>>>> # Package managers >>>>>>>> # >>>>>>>> # BR2_PACKAGE_IPKG is not set >>>>>>>> >>>>>>>> # >>>>>>>> # rpm requires libneon with SSL, XML and ZLIB support >>>>>>>> # >>>>>>>> >>>>>>>> # >>>>>>>> # xz payload support requires a toolchain with c++ support >>>>>>>> # >>>>>>>> >>>>>>>> # >>>>>>>> # Shell and utilities >>>>>>>> # >>>>>>>> # BR2_PACKAGE_AT is not set >>>>>>>> # BR2_PACKAGE_BASH is not set >>>>>>>> # BR2_PACKAGE_DASH is not set >>>>>>>> # BR2_PACKAGE_DIALOG is not set >>>>>>>> # BR2_PACKAGE_FILE is not set >>>>>>>> # BR2_PACKAGE_INOTIFY_TOOLS is not set >>>>>>>> # BR2_PACKAGE_LOCKFILE_PROGS is not set >>>>>>>> # BR2_PACKAGE_LOGROTATE is not set >>>>>>>> # BR2_PACKAGE_SCREEN is not set >>>>>>>> # BR2_PACKAGE_SUDO is not set >>>>>>>> # BR2_PACKAGE_WHICH is not set >>>>>>>> # BR2_PACKAGE_XMLSTARLET is not set >>>>>>>> >>>>>>>> # >>>>>>>> # System tools >>>>>>>> # >>>>>>>> # BR2_PACKAGE_ACL is not set >>>>>>>> # BR2_PACKAGE_ATTR is not set >>>>>>>> # BR2_PACKAGE_BOOTUTILS is not set >>>>>>>> # BR2_PACKAGE_HTOP is not set >>>>>>>> # BR2_PACKAGE_MODULE_INIT_TOOLS is not set >>>>>>>> # BR2_PACKAGE_PROCPS is not set >>>>>>>> # BR2_PACKAGE_PSMISC is not set >>>>>>>> # BR2_PACKAGE_RSYSLOG is not set >>>>>>>> # BR2_PACKAGE_SYSKLOGD is not set >>>>>>>> # BR2_PACKAGE_SYSVINIT is not set >>>>>>>> BR2_PACKAGE_UTIL_LINUX=y >>>>>>>> BR2_PACKAGE_UTIL_LINUX_MOUNT=y >>>>>>>> BR2_PACKAGE_UTIL_LINUX_FSCK=y >>>>>>>> # BR2_PACKAGE_UTIL_LINUX_LIBMOUNT is not set >>>>>>>> BR2_PACKAGE_UTIL_LINUX_LIBUUID=y >>>>>>>> # BR2_PACKAGE_UTIL_LINUX_UUIDD is not set >>>>>>>> BR2_PACKAGE_UTIL_LINUX_LIBBLKID=y >>>>>>>> # BR2_PACKAGE_UTIL_LINUX_AGETTY is not set >>>>>>>> # BR2_PACKAGE_UTIL_LINUX_CRAMFS is not set >>>>>>>> # BR2_PACKAGE_UTIL_LINUX_SWITCH_ROOT is not set >>>>>>>> # BR2_PACKAGE_UTIL_LINUX_PIVOT_ROOT is not set >>>>>>>> # BR2_PACKAGE_UTIL_LINUX_FALLOCATE is not set >>>>>>>> # BR2_PACKAGE_UTIL_LINUX_UNSHARE is not set >>>>>>>> # BR2_PACKAGE_UTIL_LINUX_RENAME is not set >>>>>>>> # BR2_PACKAGE_UTIL_LINUX_SCHEDUTILS is not set >>>>>>>> # BR2_PACKAGE_UTIL_LINUX_WALL is not set >>>>>>>> # BR2_PACKAGE_UTIL_LINUX_ARCH is not set >>>>>>>> # BR2_PACKAGE_UTIL_LINUX_INIT is not set >>>>>>>> # BR2_PACKAGE_UTIL_LINUX_KILL is not set >>>>>>>> # BR2_PACKAGE_UTIL_LINUX_LAST is not set >>>>>>>> # BR2_PACKAGE_UTIL_LINUX_MESG is not set >>>>>>>> # BR2_PACKAGE_UTIL_LINUX_PARTX is not set >>>>>>>> # BR2_PACKAGE_UTIL_LINUX_RAW is not set >>>>>>>> # BR2_PACKAGE_UTIL_LINUX_RESET is not set >>>>>>>> # BR2_PACKAGE_UTIL_LINUX_LOGIN_UTILS is not set >>>>>>>> # BR2_PACKAGE_UTIL_LINUX_WRITE is not set >>>>>>>> >>>>>>>> # >>>>>>>> # Text editors and viewers >>>>>>>> # >>>>>>>> # BR2_PACKAGE_ED is not set >>>>>>>> # BR2_PACKAGE_LESS is not set >>>>>>>> BR2_PACKAGE_NANO=y >>>>>>>> # BR2_PACKAGE_UEMACS is not set >>>>>>>> # BR2_PACKAGE_VIM is not set >>>>>>>> >>>>>>>> # >>>>>>>> # Filesystem images >>>>>>>> # >>>>>>>> # BR2_TARGET_ROOTFS_CRAMFS is not set >>>>>>>> # BR2_TARGET_ROOTFS_CLOOP is not set >>>>>>>> BR2_TARGET_ROOTFS_EXT2=y >>>>>>>> BR2_TARGET_ROOTFS_EXT2_BLOCKS=0 >>>>>>>> BR2_TARGET_ROOTFS_EXT2_INODES=0 >>>>>>>> BR2_TARGET_ROOTFS_EXT2_RESBLKS=0 >>>>>>>> BR2_TARGET_ROOTFS_EXT2_NONE=y >>>>>>>> # BR2_TARGET_ROOTFS_EXT2_GZIP is not set >>>>>>>> # BR2_TARGET_ROOTFS_EXT2_BZIP2 is not set >>>>>>>> # BR2_TARGET_ROOTFS_EXT2_LZMA is not set >>>>>>>> # BR2_TARGET_ROOTFS_JFFS2 is not set >>>>>>>> # BR2_TARGET_ROOTFS_UBIFS is not set >>>>>>>> # BR2_TARGET_ROOTFS_SQUASHFS is not set >>>>>>>> # BR2_TARGET_ROOTFS_TAR is not set >>>>>>>> # BR2_TARGET_ROOTFS_CPIO is not set >>>>>>>> # BR2_TARGET_ROOTFS_ISO9660 is not set >>>>>>>> # BR2_TARGET_ROOTFS_INITRAMFS is not set >>>>>>>> # BR2_TARGET_ROOTFS_ROMFS is not set >>>>>>>> >>>>>>>> # >>>>>>>> # Bootloaders >>>>>>>> # >>>>>>>> # BR2_TARGET_BAREBOX is not set >>>>>>>> # BR2_TARGET_GRUB is not set >>>>>>>> BR2_TARGET_SYSLINUX=y >>>>>>>> # BR2_TARGET_SYSLINUX_ISOLINUX is not set >>>>>>>> # BR2_TARGET_SYSLINUX_PXELINUX is not set >>>>>>>> # BR2_TARGET_UBOOT is not set >>>>>>>> >>>>>>>> # >>>>>>>> # Kernel >>>>>>>> # >>>>>>>> BR2_LINUX_KERNEL=y >>>>>>>> # BR2_LINUX_KERNEL_2_6_39 is not set >>>>>>>> # BR2_LINUX_KERNEL_SAME_AS_HEADERS is not set >>>>>>>> BR2_LINUX_KERNEL_CUSTOM_VERSION=y >>>>>>>> # BR2_LINUX_KERNEL_CUSTOM_TARBALL is not set >>>>>>>> # BR2_LINUX_KERNEL_CUSTOM_GIT is not set >>>>>>>> BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.0.4" >>>>>>>> BR2_LINUX_KERNEL_VERSION="3.0.4" >>>>>>>> BR2_LINUX_KERNEL_PATCH="" >>>>>>>> # BR2_LINUX_KERNEL_USE_DEFCONFIG is not set >>>>>>>> BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y >>>>>>>> BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="/home/marc/linux-3.0.4/.config" >>>>>>>> >>>>>>>> BR2_LINUX_KERNEL_BZIMAGE=y >>>>>>>> # BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM is not set >>>>>>>> BR2_LINUX_KERNEL_INSTALL_TARGET=y >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> buildroot mailing list >>>>>>>> buildroot at busybox.net >>>>>>>> http://lists.busybox.net/mailman/listinfo/buildroot >>>>>>>> >>>>>> _______________________________________________ >>>>>> buildroot mailing list >>>>>> buildroot at busybox.net >>>>>> http://lists.busybox.net/mailman/listinfo/buildroot >>>>>> >>>>>> >>>>>> >>>>> _______________________________________________ >>>>> buildroot mailing list >>>>> buildroot at busybox.net >>>>> http://lists.busybox.net/mailman/listinfo/buildroot >>>>> >>>> >> >> > _______________________________________________ > buildroot mailing list > buildroot at busybox.net > http://lists.busybox.net/mailman/listinfo/buildroot > > >