From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stephan Hoffmann Date: Wed, 23 Nov 2011 16:46:03 +0100 Subject: [Buildroot] Adding Microblaze support to Buildroot In-Reply-To: <20111123145448.5f5d15b9@skate> References: <4EBC554E.7050605@gmail.com> <4EBC5656.2010103@gmail.com> <4EBD18F1.6020804@relinux.de> <4ECB62C8.6030301@relinux.de> <87sjlgplif.fsf@macbook.be.48ers.dk> <4ECCD481.4030707@relinux.de> <20111123145448.5f5d15b9@skate> Message-ID: <4ECD153B.3040801@relinux.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Am 23.11.2011 14:54, schrieb Thomas Petazzoni: > Le Wed, 23 Nov 2011 12:09:53 +0100, > Stephan Hoffmann a ?crit : > >> To which extend do you expect individual packages being tested on the >> different architectures? > On Blackfin, there are many packages that don't build, because they > simply cannot build on !MMU systems. Our goal is to progressively add > the "depends on BR2_USE_MMU" on all packages that need a MMU to > build/work properly. > In fact, my Microblaze is with MMU since Xilinx only supports linux with mmu. > Excellent. Would be good to have : > > * A patch adding the general Microblaze support > > * A patch that adds some defconfig for the Microblaze board you have I'll send these in one patch if that's O.K. There ia also a new kernel defconfig, because the defconfig supplied with the kernel does not work for my configuration. > * It would be even better if another patch could add a defconfig for > the Microblaze Qemu emulation, so that those not having a > Microblaze board can test. That's a real good idea, I'll work on this later. Stephan -- reLinux - Stephan Hoffmann Am Schmidtgrund 124 50765 K?ln Tel. +49.221.95595-19 Fax: -64 www.reLinux.de sho at reLinux.de