From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stephan Hoffmann Date: Mon, 12 Mar 2012 18:17:47 +0100 Subject: [Buildroot] Toolchain for Microblaze In-Reply-To: References: <4F5CEE5D.30504@relinux.de> Message-ID: <4F5E2FBB.3080407@relinux.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Am 12.03.2012 02:37, schrieb Spenser Gilliland: > I agree it would be nice. Although, I have tried to get this to work > with no success. The following repos may be of some help (have not > had time to test them.) > > http://git.monstr.eu/git/ > > Spenser I just thought about trying this old 4.1.2 version when I found out that gnu now supports Microblaze in 4.6. I hope someone familiar in building toolchains can help building it. Stephan > On Sun, Mar 11, 2012 at 1:26 PM, Stephan Hoffmann wrote: >> Hello all, >> >> I just found on the gcc web site ( http://gcc.gnu.org/gcc-4.6/changes.html ) >> the following message: >> >> MicroBlaze >> >> Support has been added for the Xilinx MicroBlaze softcore processor >> (microblaze-elf) embedded target. This configurable processor is supported >> on several Xilinx Spartan and Virtex FPGAs. >> >> This sounds like good news. Maybe we can get rid of the prebuild Xilinx >> Toolchain. >> >> Unfortunatelly, I don't have any experience in building toolchains. A first >> try building it as internal toolchain with almost standard settings ended >> with an aclocal error;-( >> >> Can anyone try building it? >> >> Kind regards >> >> Stephan >> >> -- >> reLinux - Stephan Hoffmann >> Am Schmidtgrund 124 50765 K?ln >> Tel. +49.221.95595-19 Fax: -64 >> www.reLinux.de sho at reLinux.de >> >> >> _______________________________________________ >> buildroot mailing list >> buildroot at busybox.net >> http://lists.busybox.net/mailman/listinfo/buildroot > > -- reLinux - Stephan Hoffmann Am Schmidtgrund 124 50765 K?ln Tel. +49.221.95595-19 Fax: -64 www.reLinux.de sho at reLinux.de