From: Stephan Hoffmann <sho@relinux.de>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH 3/3] Microblaze: added external toolchain from Xilinx
Date: Sat, 17 Mar 2012 10:40:42 +0100 [thread overview]
Message-ID: <4F645C1A.5000403@relinux.de> (raw)
From: "Alvaro G. M" <alvaro.gamez@hazent.com>
Signed-off-by: Stephan Hoffmann <sho at relinux.de
Signed-off-by: Alvaro G. M <alvaro.gamez@hazent.com>
Tested-by: Stephan Hoffmann <sho@relinux.de>
Downloading Microblaze LE toolchain works on a clean install.
---
toolchain/toolchain-external/Config.in | 21 +++++++++++++++++++++
toolchain/toolchain-external/ext-tool.mk | 6 ++++++
2 files changed, 27 insertions(+), 0 deletions(-)
diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in
index 24cad9c..014bfc5 100644
--- a/toolchain/toolchain-external/Config.in
+++ b/toolchain/toolchain-external/Config.in
@@ -432,6 +432,25 @@ config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2010RC1
Toolchain for the Blackfin architecture, from
http://blackfin.uclinux.org.
+config BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEEL_V2
+ bool "Xilinx Little Endian Microblaze GNU Tools"
+ depends on BR2_microblazeel
+ select BR2_LARGEFILE
+ select BR2_INET_IPV6
+ select BR2_INET_RPC
+ select BR2_ENABLE_LOCALE
+ select BR2_USE_WCHAR
+ help
+ Toolchain for the Microblaze architecture, from
+ http://wiki.xilinx.com/mb-gnu-tools
+
+config BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_V2
+ bool "Xilinx Big Endian Microblaze GNU Tools"
+ depends on BR2_microblazebe
+ help
+ Toolchain for the Microblaze architecture, from
+ http://wiki.xilinx.com/mb-gnu-tools
+
config BR2_TOOLCHAIN_EXTERNAL_CUSTOM
bool "Custom toolchain"
help
@@ -470,6 +489,8 @@ config BR2_TOOLCHAIN_EXTERNAL_PREFIX
default "arm-none-linux-gnueabi" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201009
default "arm-none-linux-gnueabi" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201103
default "arm-none-linux-gnueabi" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201109
+ default "microblazeel-unknown-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEEL_V2
+ default "microblaze-unknown-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_V2
default "mips-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS44
default "mips-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201103
default "powerpc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009
diff --git a/toolchain/toolchain-external/ext-tool.mk b/toolchain/toolchain-external/ext-tool.mk
index 3c97de1..51bce91 100644
--- a/toolchain/toolchain-external/ext-tool.mk
+++ b/toolchain/toolchain-external/ext-tool.mk
@@ -239,6 +239,12 @@ TOOLCHAIN_EXTERNAL_SOURCE_1 = blackfin-toolchain-2011R1-RC4.i386.tar.bz2
TOOLCHAIN_EXTERNAL_SITE_2 = http://blackfin.uclinux.org/gf/download/frsrelease/531/9517/
TOOLCHAIN_EXTERNAL_SOURCE_2 = blackfin-toolchain-uclibc-full-2011R1-RC4.i386.tar.bz2
TOOLCHAIN_EXTERNAL_SOURCE = $(TOOLCHAIN_EXTERNAL_SOURCE_1) $(TOOLCHAIN_EXTERNAL_SOURCE_2)
+else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEEL_V2),y)
+TOOLCHAIN_EXTERNAL_SITE=http://git.xilinx.com/?p=xldk/microblaze_v2.0_le.git;a=blob;h=d7b493c5dbcc24ba9cc3be2e4c14d6d9701e6805;hb=00163583b771bb4e937632765dd0c5516b3e31c4;f=
+TOOLCHAIN_EXTERNAL_SOURCE=microblazeel-unknown-linux-gnu.tgz
+else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_V2),y)
+TOOLCHAIN_EXTERNAL_SITE=http://git.xilinx.com/?p=xldk/microblaze_v2.0.git;a=blob;h=71e031ae990e063a5718f90d30cf97ad85e2f565;hb=569081301f0f1d8d3b24335a364e8ff1774190d4;f=
+TOOLCHAIN_EXTERNAL_SOURCE=microblaze-unknown-linux-gnu.tgz
else
# A value must be set (even if unused), otherwise the
# $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE) rule would override the main
--
1.7.9.1
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
--
reLinux - Stephan Hoffmann
Am Schmidtgrund 124 50765 K?ln
Tel. +49.221.95595-19 Fax: -64
www.reLinux.de sho at reLinux.de
--
reLinux - Stephan Hoffmann
Am Schmidtgrund 124 50765 K?ln
Tel. +49.221.95595-19 Fax: -64
www.reLinux.de sho at reLinux.de
next reply other threads:[~2012-03-17 9:40 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-17 9:40 Stephan Hoffmann [this message]
2012-03-17 9:46 ` [Buildroot] [PATCH 1/2] Microblaze: build kernel with device tree Stephan Hoffmann
2012-03-18 21:55 ` Peter Korsgaard
2012-03-17 9:46 ` [Buildroot] [PATCH 2/2] Microblaze: added defconfig for Avnet S6LX9 Microboard Stephan Hoffmann
2012-03-18 21:57 ` Peter Korsgaard
2012-03-18 18:01 ` [Buildroot] [PATCH 3/3] Microblaze: added external toolchain from Xilinx Arnout Vandecappelle
2012-03-18 18:05 ` Alvaro Gamez
-- strict thread matches above, loose matches on Subject: below --
2012-03-16 13:42 [Buildroot] [PATCH 1/3] DOWNLOAD: change $1=DIRECTORY_URL, $2=FILE_NAME to $1=FULL_FILE_URL, $2=FILE_NAME Alvaro G. M
2012-03-16 13:42 ` [Buildroot] [PATCH 3/3] Microblaze: added external toolchain from Xilinx Alvaro G. M
2012-03-18 21:54 ` Peter Korsgaard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F645C1A.5000403@relinux.de \
--to=sho@relinux.de \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox