From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stephan Hoffmann Date: Tue, 10 Apr 2012 18:56:13 +0200 Subject: [Buildroot] [PATCH v2 2/2] BeagleBone: new board In-Reply-To: References: <1331561609-26989-1-git-send-email-fhunleth@troodon-software.com> <4F803D6E.2020402@relinux.de> Message-ID: <4F84662D.8070906@relinux.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Am 10.04.2012 01:27, schrieb Frank Hunleth: > Hi Stephan, > > On Sat, Apr 7, 2012 at 9:13 AM, Stephan Hoffmann wrote: >> Am 12.03.2012 15:13, schrieb Frank Hunleth: >>> This configuration uses the latest released kernel and u-boot versions >>> supported by Beagleboard developers. The Linux kernel configuration has >>> been modified to compile in EXT2 support and use gzip to compress the >>> kernel. >>> >>> Signed-off-by: Frank Hunleth >> Tested-by: Stephan Hoffmann >> >> CONFIG_EXT3_FS=m has to be changed to "y" to boot with the supplied u-boot configuration. > Thanks a lot for testing the patch and reporting back. > > It is interesting that ext3 needs to be turned on. The patch to u-boot > which *should* have been applied should have changed the ext3 config > reference to ext2. However, I haven't been paying close attention to > the BR list for the past couple weeks and my patch could be out of > date now. Hello Frank, at least, I prefer having ext3;-) What would be a reason to stick to ext2? > Having said this, I need to update my patch anyway. Nicolas Dechesne > submitted an SPL bootloader patch that I'd like to base the new patch > off of once it gets in. Also, the Linux config that I submitted feels > way too bloated for BR. If you need something sooner, my current > configs are at: > > https://github.com/nerves-project/bbone-erlang-buildroot/blob/master/configs/beaglebone_defconfig > > and > > https://github.com/nerves-project/bbone-erlang-buildroot/blob/master/board/beaglebone/linux-3.2.9.config I'll have a look at these. I've also thrown out lots of drivers to get a compact system. Kind regards Stephan > The main change is that no longer compiles many drivers, and hardware > float is enabled on the compiler. Since I haven't rebased that tree in > a while, you'll probably need to make the ext3 change again. > > Thanks, > Frank -- reLinux - Stephan Hoffmann Am Schmidtgrund 124 50765 K?ln Tel. +49.221.95595-19 Fax: -64 www.reLinux.de sho at reLinux.de