[Buildroot] [PATCH] libqwt: new package

[Arnout Vandecappelle <arnout@mind.be>]

  Hoi Laurent,

  Thanks for this resend.  Looks like you didn't read all of my feedback 
though.

On 04/29/12 12:07, Laurent GONZALEZ wrote:

  Each patch should contain your Signed-off-by line.  This is a
statement from you that you have the right to publish it.  See
http://elinux.org/Developer_Certificate_Of_Origin

> ---
>   package/Config.in        |    1 +
>   package/libqwt/Config.in |   22 +++++++++++++++++++++
>   package/libqwt/libqwt.mk |   48 ++++++++++++++++++++++++++++++++++++++++++++++
>   3 files changed, 71 insertions(+), 0 deletions(-)
>   create mode 100644 package/libqwt/Config.in
>   create mode 100644 package/libqwt/libqwt.mk
>
> diff --git a/package/Config.in b/package/Config.in
> index a310146..ce7c29d 100644
> --- a/package/Config.in
> +++ b/package/Config.in
> @@ -317,6 +317,7 @@ source "package/libglade/Config.in"
>   source "package/gdk-pixbuf/Config.in"
>   source "package/libgtk2/Config.in"
>   source "package/libpng/Config.in"
> +source "package/libqwt/Config.in"

  Since the upstream package is called qwt, I'd call the buildroot package
qwt instead of libqwt.  Also, because it provides a widget, I'd put it
under 'other GUIs', directly below qt.

>   source "package/libraw/Config.in"
>   source "package/librsvg/Config.in"
>   source "package/libsvgtiny/Config.in"
> diff --git a/package/libqwt/Config.in b/package/libqwt/Config.in
> new file mode 100644
> index 0000000..6c53ac5
> --- /dev/null
> +++ b/package/libqwt/Config.in
> @@ -0,0 +1,22 @@
> +config BR2_PACKAGE_LIBQWT
> +	bool "libqwt"
> +	depends on BR2_PACKAGE_QT
> +	help
> +	  Qwt is a graphics extension to the Qt GUI application framework. It provides a 2D plotting widget and more.

  The help text should be wrapped at 80 columns (where the tab counts as 8 characters).

> +
> +	  http://http://sourceforge.net/projects/qwt
> +
> +if BR2_PACKAGE_LIBQWT
> +
> +config BR2_PACKAGE_LIBQWT_SVG
> +	bool "SVG support"
> +	select BR2_PACKAGE_QT_SVG
> +
> +config BR2_PACKAGE_LIBQWT_MATHML
> +	bool "MathML support"
> +
> +endif
> +
> +comment "libqwt requires qt"
> +	depends on !BR2_PACKAGE_QT
> +
> diff --git a/package/libqwt/libqwt.mk b/package/libqwt/libqwt.mk
> new file mode 100644
> index 0000000..c97010c
> --- /dev/null
> +++ b/package/libqwt/libqwt.mk
> @@ -0,0 +1,48 @@
> +#############################################################
> +#
> +# libqwt
> +#
> +#############################################################
> +LIBQWT_VERSION = 6.0.1
> +LIBQWT_SOURCE = qwt-$(LIBQWT_VERSION).tar.bz2
> +LIBQWT_SITE = http://$(BR2_SOURCEFORGE_MIRROR).dl.sourceforge.net/project/qwt/qwt/$(LIBQWT_VERSION)/
> +LIBQWT_INSTALL_STAGING = YES
> +LIBQWT_DEPENDENCIES = qt
> +
> +LIBQWT_CONFIG  =    's%QWT_INSTALL_PREFIX.*/usr/local/.*%QWT_INSTALL_PREFIX = /usr%'
> +LIBQWT_CONFIG += -e 's/^.*QWT_CONFIG.*QwtDesigner.*$$/\# QWT_CONFIG += QwtDesigner/'
  For consistency, I'd use % everywhere in the sed expressions.
  Also for consistency, I'd use -e in the first expression too.

> +LIBQWT_CONFIG += -e 's%/features%/mkspecs/features%'
> +
> +ifeq ($(BR2_PACKAGE_LIBQWT_SVG),y)
> +	LIBQWT_CONFIG += -e 's/^.*QWT_CONFIG.*QwtSvg.*$$/QWT_CONFIG += QwtSvg/'
> +else
> +	LIBQWT_CONFIG += -e 's/^.*QWT_CONFIG.*QwtSvg.*$$/\# QWT_CONFIG += QwtSvg/'
> +endif
> +
> +ifeq ($(BR2_PACKAGE_LIBQWT_MATHML),y)
> +	LIBQWT_CONFIG += -e 's/^.*QWT_CONFIG.*QwtMathML.*$$/QWT_CONFIG += QwtMathML/'
> +else
> +	LIBQWT_CONFIG += -e 's/^.*QWT_CONFIG.*QwtMathML.*$$/\# QWT_CONFIG += QwtMathML/'
> +endif
> +
> +define LIBQWT_CONFIGURE_CMDS
> +	$(SED) $(LIBQWT_CONFIG) $(@D)/qwtconfig.pri
> +	(cd $(@D); $(QT_QMAKE))
> +endef
> +
> +define LIBQWT_BUILD_CMDS
> +	$(MAKE) -C $(@D)
> +endef
> +
> +define LIBQWT_INSTALL_STAGING_CMDS
> +	$(MAKE) -C $(@D) install INSTALL_ROOT=$(STAGING_DIR)
> +	cp -a $(STAGING_DIR)/usr/mkspecs $(HOST_DIR)/usr
  I would expect that only the qwtconfig.pri needs to be copied,
not the whole mkspecs directory.
> +	$(SED) 's%QWT_INSTALL_PREFIX = /usr%QWT_INSTALL_PREFIX = $(STAGING_DIR)/usr%' $(HOST_DIR)/usr/mkspecs/features/qwtconfig.pri
> +endef
> +
> +define LIBQWT_INSTALL_TARGET_CMDS
> +	$(MAKE) -C $(@D) install INSTALL_ROOT=$(TARGET_DIR)
> +	rm -Rf $(TARGET_DIR)/usr/mkspecs
> +endef
> +
> +$(eval $(call GENTARGETS))

  Regards,
  Arnout

-- 
Arnout Vandecappelle                               arnout at mind be
Senior Embedded Software Architect                 +32-16-286540
Essensium/Mind                                     http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium                BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F