From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arnout Vandecappelle Date: Wed, 20 Jun 2012 08:59:08 +0200 Subject: [Buildroot] [PATCH 1/2] Rework of the init system In-Reply-To: <4FDEE7B2.1060502@free-electrons.com> References: <1cbed22cb8b47ae0241f8ab981acb1662eca1f46.1338285613.git.maxime.ripard@free-electrons.com> <4FCD449E.9030700@mind.be> <4FDEE7B2.1060502@free-electrons.com> Message-ID: <4FE174BC.8090904@mind.be> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On 06/18/12 10:32, Maxime Ripard wrote: >>> >> +choice >>> >> + prompt "Init system" >>> >> + default BR2_INIT_BUSYBOX >>> >> + >>> >> +config BR2_INIT_BUSYBOX >>> >> + bool "Busybox" >>> >> + select BR2_PACKAGE_BUSYBOX >> > >> > Ideally, the busybox.mk should make sure init is selected in the >> > busybox config >> > if this option is chosen. > > I actually did so at first, and you asked me back then to remove it:) > (http://lists.busybox.net/pipermail/buildroot/2011-December/048541.html) You misunderstood my comment back then: I'm against _disabling_ the busybox init. The _enable_ should be kept. Regards, Arnout -- Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286540 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F