From: Arnout Vandecappelle <arnout@mind.be>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH v2 2/2] gettext: get rid of LIBINTL stuff
Date: Sun, 15 Jul 2012 14:22:37 +0200 [thread overview]
Message-ID: <5002B60D.4040200@mind.be> (raw)
In-Reply-To: <1338674861-1716-2-git-send-email-s.martin49@gmail.com>
On 06/03/12 00:07, Samuel Martin wrote:
> The AUTOTARGET conversion of gettext introduces some changes:
> - the target 'gettext' now builds and installs libintl if locale
> support is enabled. The target 'libintl' no longer exists, so the
> libintl dependency is no longer needed;
> - the gettext binaries (usr/bin/gettext{,.sh,ize}), formerly installed
> together with 'libintl', are now installed together with 'gettext'.
> Because the gettext binaries have a rather small footprints, they
> are now alway installed together with 'gettext'.
I don't agree. I'll comment on this below.
>
> This patch does:
> - update the gettext package;
> - warn about libintl availability depending on the locale support
> enabled in the toolchain;
Why is this needed?
> - cleanup all remaining gettext/libintl dependencies;
> - fix/cleanup some BR2_NEEDS_GETTEXT/BR2_NEEDS_GETTEXT_IF_LOCALE
> dependencies.
These should be in a separate patch.
Note: I do think this is a very valuable patch, so I hope you still
have the energy to work on it, even though it hasn't been met with a lot
of enthusiasm on the list...
[snip]
> diff --git a/package/gettext/Config.in b/package/gettext/Config.in
> index 0ee4065..cc48b98 100644
> --- a/package/gettext/Config.in
> +++ b/package/gettext/Config.in
> @@ -12,12 +12,5 @@ config BR2_PACKAGE_GETTEXT
> comment "gettext requires a toolchain with WCHAR support"
> depends on BR2_NEEDS_GETTEXT&& !BR2_USE_WCHAR
>
> -config BR2_PACKAGE_LIBINTL
> - bool "libintl"
> - depends on BR2_NEEDS_GETTEXT
> - depends on BR2_USE_WCHAR
> - help
> - Selecting this package installs all of gettext in the staging
> - directory and the shared library for it's use in the target.
> -
> - http://www.gnu.org/software/gettext/
This could become something like:
if BR2_PACKAGE_GETTEXT
config BR2_PACKAGE_GETTEXT_BINARIES
bool "Install gettext binaries"
help
Keep the gettext binaries (gettext, gettextize, gettext.sh)
on the target filesystem. This is typically only necessary
if the target is itself a development system.
endif
> +comment "libintl requires a toolchain with locale/i18n support"
> + depends on BR2_PACKAGE_GETTEXT && !BR2_ENABLE_LOCALE
I don't understand this comment... The gettext package builds libintl, right?
> diff --git a/package/gettext/gettext.mk b/package/gettext/gettext.mk
> index 7c7b26c..a9dac28 100644
> --- a/package/gettext/gettext.mk
> +++ b/package/gettext/gettext.mk
> @@ -9,16 +9,6 @@ GETTEXT_INSTALL_STAGING = YES
>
> GETTEXT_CONF_OPT += \
> --disable-libasprintf \
> - --disable-openmp \
> -
> -define GETTEXT_REMOVE_BINARIES
> - rm -f $(TARGET_DIR)/usr/bin/gettext
> - rm -f $(TARGET_DIR)/usr/bin/gettext.sh
> - rm -f $(TARGET_DIR)/usr/bin/gettextize
> -endef
> -
> -ifeq ($(BR2_PACKAGE_LIBINTL),y)
So this would become
ifeq ($(BR2_PACKAGE_GETTEXT_BINARIES),)
> - GETTEXT_POST_INSTALL_TARGET_HOOKS += GETTEXT_REMOVE_BINARIES
> -endif
> + --disable-openmp
>
> $(eval $(call AUTOTARGETS))
[snip]
Regards,
Arnout
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286540
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
next prev parent reply other threads:[~2012-07-15 12:22 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-02 22:07 [Buildroot] [PATCH v2 1/2] Convert gettext to autotargets Samuel Martin
2012-06-02 22:07 ` [Buildroot] [PATCH v2 2/2] gettext: get rid of LIBINTL stuff Samuel Martin
2012-06-28 21:01 ` Samuel Martin
2012-07-15 12:22 ` Arnout Vandecappelle [this message]
2012-07-17 8:21 ` Thomas Petazzoni
2012-07-17 8:33 ` Samuel Martin
2012-06-28 21:00 ` [Buildroot] [PATCH v2 1/2] Convert gettext to autotargets Samuel Martin
2012-07-15 12:07 ` Arnout Vandecappelle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5002B60D.4040200@mind.be \
--to=arnout@mind.be \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox