From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arnout Vandecappelle Date: Wed, 29 Aug 2012 01:00:22 +0200 Subject: [Buildroot] 2012.08-rc3 skipping python modules during build In-Reply-To: References: Message-ID: <503D4D86.3040802@mind.be> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On 08/28/12 17:43, Eric Seifert wrote: > Hello, I have been using the stable 2012.05 build without issue and wanted to try the latest rc3. I have a few extra > python modules I have added to the external python modules section. It seems in the latest rc3 is not building them or > even downloading the packages even though they are selected in the menuconfig, they are just ignored. It works in the > stable 2012.05 build. When I select one of the existing external modules such as pthon-serial, it does get built. The package infrastructure has changed. If you added a package ending with $(eval $(call GENTARGETS)) it will be ignored. Replace it with $(eval $(call package-generic)) (Note: this is just guesswork based on the limited information you gave.) Regards, Arnout -- Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286540 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F