From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arnout Vandecappelle Date: Sat, 15 Sep 2012 11:01:22 +0200 Subject: [Buildroot] make savedefconfig In-Reply-To: References: Message-ID: <505443E2.2060308@mind.be> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On 09/15/12 01:32, Dallas Clement wrote: > I'm not feeling overly confident in 'make savedefconfig'. It appears > to not save everything I think it should after making changes with > 'make menuconfig'. I have attached a comparison of my original config > file (shown on the right) with the defconfig file produced by 'make > savedefconfig' (shown on the left). As you can see, the items shown > in red did not make it into the defconfig. Some of these are pretty > important, such as: > > BR2_BUSYBOX_VERSION Is derived automatically from BR2_BUSYBOX_VERSION_1_19_X > BR2_ROOTFS_SKELETON_CUSTOM_PATH There's something wrong in your .config: it should normally be quoted. Did you edit the .config manually? I suspect the lack of quotes is the reason why it doesn't end up in defconfig. Another strange thing is that you have the GENERIC_GETTY things in your .config. They shouldn't be there if you have SKELETON_CUSTOM. > BR2_LINUX_KERNEL_UBOOT_IMAGE > BR2_LINUX_KERNEL_UIMAGE These default to y. Regards, Arnout -- Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286540 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F