From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arnout Vandecappelle Date: Wed, 03 Oct 2012 11:35:40 +0200 Subject: [Buildroot] [PATCH] Added build configuration for Network UPS Tools (nut) package. Signed-off-by: Dallas Clement In-Reply-To: References: Message-ID: <506C06EC.8030607@mind.be> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On 25/09/12 17:41, Dallas Clement wrote: > package/Config.in | 1 + > package/nut/Config.in | 6 ++++++ > package/nut/nut.mk | 10 ++++++++++ > 3 files changed, 17 insertions(+), 0 deletions(-) > create mode 100644 package/nut/Config.in > create mode 100644 package/nut/nut.mk I don't know which mailer you're using, but your patches don't come through correctly. You should have: Subject: [PATH] nut: new package Body: Signed-off-by: Dallas Clement <...> --- diff --git ... And if you want additional comments (e.g. patch changelog) it should go below your SOB, separated by a line containing three dashes. [snip] > diff --git a/package/nut/nut.mk b/package/nut/nut.mk > new file mode 100644 > index 0000000..7a0b7c6 > --- /dev/null > +++ b/package/nut/nut.mk > @@ -0,0 +1,10 @@ > +############################################################# > +# > +# nut > +# > +############################################################# > +NUT_VERSION = 2.4.3 > +NUT_SOURCE = nut-$(NUT_VERSION).tar.gz > +NUT_SITE = http://www.networkupstools.org/source/2.4/ > + > +$(eval $(autotools-package)) On uClibc toolchain, it misses -lm so you should add: NUT_CONF_ENV = LDFLAGS="$(TARGET_LDFLAGS) -lm" Regards, Arnout -- Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286540 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F