From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arnout Vandecappelle Date: Fri, 05 Oct 2012 23:34:30 +0200 Subject: [Buildroot] Buildroot Issue with a uImage build In-Reply-To: <7D8DC74DEB12384E8E4F5EE4879A8497401F03B5@USMANSMEXPW01> References: <7D8DC74DEB12384E8E4F5EE4879A8497401F03B5@USMANSMEXPW01> Message-ID: <506F5266.9030305@mind.be> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On 04/10/12 21:21, Morrison, Tom wrote: > I was pointed to a patch that Peter K. had added a default config. For the Boundary Devices > Nitrogen/Sabre-Lite boards(I.MX6 processor). > > http://git.buildroot.net/buildroot/commit/?id=913b916567231aedb34c4a616519f607eb90e616 > > When I built this - the associated Kernel uImage was HUGE (60Meg)? Something funny going on there... I built the current master with the nitrogen6x_defconfig and the uImage is only 3.7M. Maybe check the linux config, did it accidentally turn into an allyesconfig? Regards, Arnout -- Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286540 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F