From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arnout Vandecappelle Date: Fri, 19 Oct 2012 22:46:30 +0200 Subject: [Buildroot] Kernel does not boot : dts is not appended to the kernel (Karo TX53 [imx53]) In-Reply-To: <1E9ED8BFF49147018F72AEB3007FC941@JohanW7> References: <1E9ED8BFF49147018F72AEB3007FC941@JohanW7> Message-ID: <5081BC26.3000103@mind.be> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On 19/10/12 17:02, Sagaert Johan wrote: > #2. Concatenate the kernel with the generated DT blob: > cat arch/arm/boot/zImage arch/arm/boot/tx53.dtb> arch/arm/boot/zImage_tx53 > > When I look under output/images I see only zImage, not the kernel with the appended dts blob (zImge_tx53). This is what buildroot does, except it goes to images/zImage. Can you verify that buildroot builds arch/arm/boot/tx53.dtb correctly? It builds just one specific dtb, not all dtbs, so that should be easy to verify. Regards, Arnout -- Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286540 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F