From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arnout Vandecappelle Date: Tue, 23 Oct 2012 10:46:49 +0200 Subject: [Buildroot] external toolchains and sysroot In-Reply-To: <20121023092820.638aedd0@skate> References: <508118F0.3030202@6wind.com> <20121019093805.GA2382@mail.sceen.net> <50812162.7090809@6wind.com> <20121019095730.GA6397@mail.sceen.net> <20121019100213.GA7355@mail.sceen.net> <50813429.3010107@6wind.com> <20121021114154.3d23d89b@skate> <50863D0A.40809@6wind.com> <20121023092820.638aedd0@skate> Message-ID: <50865979.20604@mind.be> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On 23/10/12 09:28, Thomas Petazzoni wrote: > Unless proven otherwise, I believe that the stability we have achieved > in external toolchain support using this solution is well worth the ~60 > MB copy at the beginning of a build. It takes less than 5 seconds, with > is in the statistical noise even compared to a simple Busybox-only > build. FWIW, I agree. The copying of the sysroot is a bit tricky, but at least after the copy is done, things are nice and consistent. Also, some trickery is required anyway to make sure the right things are copied into the target directory. Regards, Arnout -- Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286540 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F