From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arnout Vandecappelle Date: Wed, 07 Nov 2012 20:24:11 +0100 Subject: [Buildroot] [PATCHv2 10/10] Make savedefconfig save to a configured file. In-Reply-To: <509A1872.1040108@lucaceresoli.net> References: <1351063027-13800-1-git-send-email-arnout@mind.be> <1351063027-13800-11-git-send-email-arnout@mind.be> <509A1872.1040108@lucaceresoli.net> Message-ID: <509AB55B.7090307@mind.be> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On 11/07/12 09:14, Luca Ceresoli wrote: >> +1. Set +BR2_DEFCONFIG+ to +/buildroot.config+ > > I've always been saving my Buildroot board config in configs/, to allow > me to startup from a clean working copy with a simple: > make myboard_defconfig This was actually in the out-of-buildroot-tree section. And I removed that section completely, so it's irrelevant. > > The location you suggest requires a bit more typing, but it is probably > cleaner, and it does not prevent me to continue my way... so: > > Acked-by: Luca Ceresoli Thanks for all your acks. I've refreshed the patches, made some additional fixes, and will repost right away. Regards, Arnout -- Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286540 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F