From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arnout Vandecappelle Date: Tue, 13 Nov 2012 22:18:43 +0100 Subject: [Buildroot] [PATCH v2 3/6] Add board files for snowball In-Reply-To: <50A228F9.20605@calao-systems.com> References: <1352742102-19010-1-git-send-email-gregory.hermant@calao-systems.com> <1352742102-19010-4-git-send-email-gregory.hermant@calao-systems.com> <20121112193716.54622654@skate> <50A228F9.20605@calao-systems.com> Message-ID: <50A2B933.4010607@mind.be> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On 13/11/12 12:03, Gr?gory Hermant wrote: > Le 12/11/2012 19:37, Thomas Petazzoni a ?crit : >> Dear Gregory Hermant, >> >> On Mon, 12 Nov 2012 18:41:39 +0100, Gregory Hermant wrote: >>> >>> Signed-off-by: Gregory Hermant >>> --- >>> board/calao/snowball/busybox-1.20.x.config | 1024 ++++++++++++++++++++++++++++ >> >> Is there a specific reason to have a custom Busybox configuration file? > > Enable the firmware loading (mdev). As I wrote last Friday, that is (or should be) enabled automatically when you select BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV, which you do in patch 6/6. Regards, Arnout -- Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286540 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F