From: Arnout Vandecappelle <arnout@mind.be>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH v4 6/6] Add config file for the snowball board
Date: Thu, 29 Nov 2012 00:04:25 +0100 [thread overview]
Message-ID: <50B69879.3030102@mind.be> (raw)
In-Reply-To: <1353927919-7250-7-git-send-email-gregory.hermant@calao-systems.com>
On 26/11/12 12:05, Gregory Hermant wrote:
>
> Signed-off-by: Gregory Hermant<gregory.hermant@calao-systems.com>
> ---
> configs/calao_snowball_defconfig | 28 ++++++++++++++++++++++++++++
> 1 file changed, 28 insertions(+)
> create mode 100644 configs/calao_snowball_defconfig
>
> diff --git a/configs/calao_snowball_defconfig b/configs/calao_snowball_defconfig
> new file mode 100644
> index 0000000..700be5d
> --- /dev/null
> +++ b/configs/calao_snowball_defconfig
> @@ -0,0 +1,28 @@
> +BR2_arm=y
> +BR2_cortex_a9=y
> +BR2_GCC_VERSION_4_7_X=y
> +# BR2_SOFT_FLOAT is not set
> +BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y
> +BR2_TOOLCHAIN_BUILDROOT_INET_IPV6=y
> +BR2_TOOLCHAIN_BUILDROOT_INET_RPC=y
> +BR2_TOOLCHAIN_BUILDROOT_LOCALE=y
> +BR2_TOOLCHAIN_BUILDROOT_CXX=y
Are all of these needed? AFAICS only WCHAR is really needed
(for dbus, for bluez-utils).
> +BR2_VFP_FLOAT=y
> +BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
> +BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA2"
> +BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
> +BR2_PACKAGE_FBSET=y
Why is FBSET needed?
Regards,
Arnout
> +BR2_PACKAGE_SNOWBALL_HDMISERVICE=y
> +BR2_PACKAGE_LIBNL=y
> +BR2_PACKAGE_SNOWBALL_INIT=y
> +BR2_PACKAGE_WPA_SUPPLICANT=y
> +BR2_TARGET_ROOTFS_TAR_GZIP=y
> +BR2_TARGET_UBOOT=y
> +BR2_TARGET_UBOOT_BOARDNAME="snowball"
> +BR2_LINUX_KERNEL=y
> +BR2_LINUX_KERNEL_CUSTOM_GIT=y
> +BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://igloocommunity.org/git/kernel/igloo-kernel.git"
> +BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="stable-linux-ux500-3.4"
> +BR2_LINUX_KERNEL_PATCH="board/calao/snowball/"
> +BR2_LINUX_KERNEL_DEFCONFIG="u8500"
> +BR2_LINUX_KERNEL_INSTALL_TARGET=y
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286540
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
prev parent reply other threads:[~2012-11-28 23:04 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-26 11:05 [Buildroot] [PATCH v4 0/6] Add support for the snowball board Gregory Hermant
2012-11-26 11:05 ` [Buildroot] [PATCH v4 1/6] snowball-hdmiservice: new package Gregory Hermant
2012-11-28 22:33 ` Arnout Vandecappelle
2012-11-26 11:05 ` [Buildroot] [PATCH v4 2/6] ux500-firmware: " Gregory Hermant
2012-11-28 22:36 ` Arnout Vandecappelle
2012-11-26 11:05 ` [Buildroot] [PATCH v4 3/6] Add board files for snowball Gregory Hermant
2012-11-26 11:05 ` [Buildroot] [PATCH v4 4/6] Add init script files for snowball board Gregory Hermant
2012-11-28 23:18 ` Arnout Vandecappelle
2012-11-26 11:05 ` [Buildroot] [PATCH v4 5/6] bluez-utils: add support for the ST-Ericsson cg2900 combo controller Gregory Hermant
2012-11-29 0:12 ` Arnout Vandecappelle
2012-11-26 11:05 ` [Buildroot] [PATCH v4 6/6] Add config file for the snowball board Gregory Hermant
2012-11-28 23:04 ` Arnout Vandecappelle [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50B69879.3030102@mind.be \
--to=arnout@mind.be \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox