From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arnout Vandecappelle Date: Tue, 18 Dec 2012 09:29:36 +0100 Subject: [Buildroot] [PATCH] libglib2: fix g_print() In-Reply-To: <1355774740-28679-1-git-send-email-benoit.thebaudeau@advansee.com> References: <1355774740-28679-1-git-send-email-benoit.thebaudeau@advansee.com> Message-ID: <50D02970.7050408@mind.be> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On 17/12/12 21:05, Beno?t Th?baudeau wrote: > If GLib is cross-compiled, the default printf settings that it selects are wrong > for glibc. This leads to issues with the g_print() functions, e.g. "Aborted" > errors returned by gst-inspect. > > This patch fixes this issue by setting printf configuration options compatible > with glibc. These options should also be compatible with uClibc. > > This solution has been suggested for LTIB by Rogerio Nunes: > https://community.freescale.com/thread/302734 > > Signed-off-by: Beno?t Th?baudeau Acked-by: Arnout Vandecappelle (Essensium/Mind) Tested-by: Arnout Vandecappelle (Essensium/Mind) (fixes our aborts when doing gst-inspect on an i.MX6 platform) Regards, Arnout -- Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286540 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F