From: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH] Add Gnublin board support
Date: Thu, 07 Feb 2013 10:53:10 +0100 [thread overview]
Message-ID: <51137986.3060400@gmail.com> (raw)
In-Reply-To: <5112BDFC.5020002@mind.be>
On 02/06/2013 09:33 PM, Arnout Vandecappelle wrote:
> On 06/02/13 19:13, Zoltan Gyarmati wrote:
>> diff --git a/configs/gnublin_defconfig b/configs/gnublin_defconfig
>> new file mode 100644
>> index 0000000..3664b96
>> --- /dev/null
>> +++ b/configs/gnublin_defconfig
>> @@ -0,0 +1,25 @@
>> +BR2_arm=y
>> +BR2_arm926t=y
>> +BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y
>> +BR2_TOOLCHAIN_BUILDROOT_INET_RPC=y
>> +BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
>
> Why are these selected?
>
>> +BR2_TARGET_GENERIC_ISSUE="Welcome to Gnublin"
>> +BR2_TARGET_GENERIC_PASSWD_SHA256=y
>> +BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV=y
>
> Why is this one selected?
>
>> +BR2_PACKAGE_LIBFFI=y
>> +BR2_PACKAGE_NCURSES=y
>> +BR2_PACKAGE_HOST_UBOOT_TOOLS=y
>
> Why do you need these packages?
>
>> +BR2_TARGET_ROOTFS_EXT2=y
>> +BR2_TARGET_ROOTFS_EXT2_BLOCKS=512000
>
> You should mention in the README that the SD card size should be at
> least 514MB (strange number by the way - wouldn't it make more sense
> to set the size at 475000 so it may actually fit on a 500MB SD card?)
>
>
> Regards,
> Arnout
>
>> +BR2_TARGET_UBOOT=y
>> +BR2_TARGET_UBOOT_BOARDNAME="GNUBLIN"
>> +BR2_TARGET_UBOOT_CUSTOM_GIT=y
>> +BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL="git://gitorious.org/u-boot-gnublin-support/u-boot-gnublin-support.git"
>>
>> +BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION="2009.11_gnublin_support_v2"
>> +BR2_LINUX_KERNEL=y
>> +BR2_LINUX_KERNEL_CUSTOM_GIT=y
>> +BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://gitorious.org/linux-3-7-gnublin/linux-3-7-gnublin.git"
>>
>> +BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="gnublin_support_v1"
>> +BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
>> +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/gnublin/gnublin_kernel_config"
>>
>> +BR2_LINUX_KERNEL_INSTALL_TARGET=y
>
>
Hi,
hm, ok, i'll clean up more carefully(it seems the configs are still
representing my setup...), thx for your time and feedback.
--
br,
Zoltan Gyarmati
mail: mr.zoltan.gyarmati at gmail.com
freenode nick: zgyarmati
next prev parent reply other threads:[~2013-02-07 9:53 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-06 18:13 [Buildroot] [PATCH] Add Gnublin board support Zoltan Gyarmati
2013-02-06 20:33 ` Arnout Vandecappelle
2013-02-07 9:53 ` Zoltan Gyarmati [this message]
-- strict thread matches above, loose matches on Subject: below --
2013-02-08 11:31 Zoltan Gyarmati
2013-02-08 11:43 ` Gustavo Zacarias
2013-02-06 12:37 [Buildroot] [PATCH] add " Zoltan Gyarmati
2013-02-06 15:46 ` Thomas Petazzoni
2013-02-06 16:07 ` Zoltan Gyarmati
2013-02-06 17:31 ` Arnout Vandecappelle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51137986.3060400@gmail.com \
--to=mr.zoltan.gyarmati@gmail.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox