From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stephan Hoffmann Date: Sat, 16 Feb 2013 17:22:53 +0100 Subject: [Buildroot] [PATCH] Docu: Add LIBFOO_EXTRACT_CMDS In-Reply-To: <510806E9.9060504@mind.be> References: <1359453890-23460-1-git-send-email-sho@relinux.de> <5107A6EE.3060607@relinux.de> <510806E9.9060504@mind.be> Message-ID: <511FB25D.3040408@relinux.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Am 29.01.2013 18:29, schrieb Arnout Vandecappelle: > On 29/01/13 11:39, Stephan Hoffmann wrote: >> Am 29.01.2013 11:18, schrieb Samuel Martin: > [snip] >>>> >>+* +LIBFOO_EXTRACT_CMDS+ lists the actions to be performed to >>>> >>+ extract the package in case no standard method applies >>> >It could be nice to add what are the standard/supported methods >> Sure. But I do not know them, I just decided to document this one >> because I had to search for the information recently. > > There is currently only one: tar - and if you don't override the > commands, tar is used regardless of filetype or extension. > > It supports three compression types: gzip (extension .gz or .tgz), > bzip2 (extension .bz2, .tbz or .tbz2), and xz (extension .xz). > > Feel free to copy the above directly :-) > I do not think that the list of XXX_CMDS variables is the right place to document the default behavior without them. Of course whe should have a documentation of the default behaior somewhere in the manual, but I am not enough familiar with this topic to write it. So I suggest to commit my patch as it is, it still applies to HEAD. Regards Stephan > Regards, > Arnout > > -- reLinux - Stephan Hoffmann Am Schmidtgrund 124 50765 K?ln Tel. +49.221.95595-19 Fax: -64 www.reLinux.de sho at reLinux.de