From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arnout Vandecappelle Date: Tue, 19 Feb 2013 22:28:22 +0100 Subject: [Buildroot] Can I make USB sound card be available over BT? How? In-Reply-To: <51216E27.2010508@wp.pl> References: <51216E27.2010508@wp.pl> Message-ID: <5123EE76.6020205@mind.be> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On 18/02/13 00:56, W.P. wrote: > Hi there, > I have following setup: > router with USB - TP-LINK MR-3220, > USB 2.0 hub, > CSR BT USB dongle plugged to hub, > "USB audio card" plugged to the same hub. > > I use (successfully) this "card" to play internet radio (wget | madplay). > > Now I want to enable this router to act as HF (stereo, A2DP?) device over > Bluetooth. > What modules (programs) I need, > and most important:how to configure it? > > Current software is OpenWRT trunk 33310, compiled at home. > [I am not "purist", I don't need WWW interface..., so I may switch to > pure buildroot, if I find the "solution"] > > [same question on OpenWRT forum is still w/o response... :( ] I guess you may have more success on a bluetooth mailing list... Perhaps start with looking at the bleuz_utils documentation. Regards, Arnout > > [BTW, anyone interested in serial(USB maybe) IR transceiver? based on > ATMega328P, LIRC compatible] - working with ANY serial (including > USB->serial dongles) > > W.P. > _______________________________________________ > buildroot mailing list > buildroot at busybox.net > http://lists.busybox.net/mailman/listinfo/buildroot > -- Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286500 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F