From: Patrick Ziegler <patrick.ziegler@fh-kl.de>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH v2] usb_modeswitch: bump to version 1.2.6
Date: Tue, 11 Jun 2013 17:22:20 +0200 [thread overview]
Message-ID: <51B740AC.5010406@fh-kl.de> (raw)
Remove 'usb_modeswitch-makefile.patch' because it was merged upstream.
This package contains a dispatcher (wrapper) that can be installed as Tcl script
or as binary without further dependency. If Tcl is selected and the binary
interpreter is installed (BR2_PACKAGE_TCL && !BR2_PACKAGE_TCL_SHLIB_ONLY) the
dispatcher will be installed as Tcl script otherwise as binary.
Signed-off-by: Patrick Ziegler <patrick.ziegler@fh-kl.de>
---
.../usb_modeswitch/usb_modeswitch-makefile.patch | 31 ----------------------
package/usb_modeswitch/usb_modeswitch.mk | 26 +++++++++++-------
2 files changed, 17 insertions(+), 40 deletions(-)
delete mode 100644 package/usb_modeswitch/usb_modeswitch-makefile.patch
diff --git a/package/usb_modeswitch/usb_modeswitch-makefile.patch b/package/usb_modeswitch/usb_modeswitch-makefile.patch
deleted file mode 100644
index b792741..0000000
--- a/package/usb_modeswitch/usb_modeswitch-makefile.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-Removed the -s from the install command. Without this, usb_modeswitch would
-fail to install.
-
-Signed-off-by: J.C. Woltz <jwoltz@gmail.com>
-
-Index: b/Makefile
-===================================================================
---- a/Makefile
-+++ b/Makefile
-@@ -46,7 +46,7 @@
- cd jim && $(MAKE) distclean
-
- install-common: all
-- install -D -s --mode=755 usb_modeswitch $(SBINDIR)/usb_modeswitch
-+ install -D --mode=755 usb_modeswitch $(SBINDIR)/usb_modeswitch
- install -D --mode=755 usb_modeswitch.sh $(UDEVDIR)/usb_modeswitch
- install -D --mode=644 usb_modeswitch.conf $(ETCDIR)/usb_modeswitch.conf
- install -D --mode=644 usb_modeswitch.1 $(MANDIR)/usb_modeswitch.1
-@@ -67,10 +67,10 @@
- install: install-common install-script
-
- install-shared: dispatcher-dynamic install-common
-- install -D -s --mode=755 usb_modeswitch_dispatcher $(SBINDIR)/usb_modeswitch_dispatcher
-+ install -D --mode=755 usb_modeswitch_dispatcher $(SBINDIR)/usb_modeswitch_dispatcher
-
- install-static: dispatcher-static install-common
-- install -D -s --mode=755 usb_modeswitch_dispatcher $(SBINDIR)/usb_modeswitch_dispatcher
-+ install -D --mode=755 usb_modeswitch_dispatcher $(SBINDIR)/usb_modeswitch_dispatcher
-
- uninstall:
- $(RM) $(SBINDIR)/usb_modeswitch
diff --git a/package/usb_modeswitch/usb_modeswitch.mk b/package/usb_modeswitch/usb_modeswitch.mk
index 92ca163..fe54b50 100644
--- a/package/usb_modeswitch/usb_modeswitch.mk
+++ b/package/usb_modeswitch/usb_modeswitch.mk
@@ -4,19 +4,32 @@
#
################################################################################
-USB_MODESWITCH_VERSION = 1.2.5
+USB_MODESWITCH_VERSION = 1.2.6
USB_MODESWITCH_SOURCE = usb-modeswitch-$(USB_MODESWITCH_VERSION).tar.bz2
USB_MODESWITCH_SITE = http://www.draisberghof.de/usb_modeswitch
USB_MODESWITCH_DEPENDENCIES = libusb-compat
USB_MODESWITCH_LICENSE = GPLv2+
USB_MODESWITCH_LICENSE_FILES = COPYING
+USB_MODESWITCH_BUILD_TARGETS = static
+USB_MODESWITCH_INSTALL_TARGETS = install-static
+
+ifeq ($(BR2_PACKAGE_TCL)$(BR2_PACKAGE_TCL_SHLIB_ONLY),y)
+ USB_MODESWITCH_DEPENDENCIES += tcl
+ USB_MODESWITCH_BUILD_TARGETS = script
+ USB_MODESWITCH_INSTALL_TARGETS = install-script
+endif
+
define USB_MODESWITCH_BUILD_CMDS
- $(TARGET_MAKE_ENV) $(MAKE) $(TARGET_CONFIGURE_OPTS) -C $(@D)
+ $(TARGET_MAKE_ENV) $(MAKE) $(TARGET_CONFIGURE_OPTS) \
+ CFLAGS="$(TARGET_CFLAGS) -D_GNU_SOURCE -Wall -I." \
+ -C $(@D) $(USB_MODESWITCH_BUILD_TARGETS)
endef
define USB_MODESWITCH_INSTALL_TARGET_CMDS
- $(TARGET_MAKE_ENV) $(MAKE) -C $(@D) DESTDIR=$(TARGET_DIR) install
+ $(TARGET_MAKE_ENV) $(MAKE) $(TARGET_CONFIGURE_OPTS) \
+ DESTDIR=$(TARGET_DIR) \
+ -C $(@D) $(USB_MODESWITCH_INSTALL_TARGETS)
endef
@@ -25,12 +38,7 @@ define USB_MODESWITCH_CLEAN_CMDS
endef
define USB_MODESWITCH_UNINSTALL_CMDS
- $(RM) -f $(TARGET_DIR)/usr/sbin/usb_modeswitch
- $(RM) -f $(TARGET_DIR)/lib/udev/usb_modeswitch
- $(RM) -f $(TARGET_DIR)/etc/usb_modeswitch.setup
- $(RM) -f $(TARGET_DIR)/usr/share/man/man1/usb_modeswitch.1
- $(RM) -rf $(TARGET_DIR)/var/lib/usb_modeswitch
- $(RM) -f $(TARGET_DIR)/usr/sbin/usb_modeswitch_dispatcher
+ $(TARGET_MAKE_ENV) $(MAKE) -C $(@D) DESTDIR=$(TARGET_DIR) uninstall
endef
$(eval $(generic-package))
--
1.8.1.2
--
Dipl.-Inf. (FH) Patrick Ziegler
University Of Applied Sciences
Kaiserslautern
Amerikastrasse 1
D-66482 Zweibruecken
Germany
Phone: +49 631 3724 5526
Mail: patrick.ziegler at fh-kl.de
PGP KeyID 0xB4796B8C
http://www.fh-kl.de
http://www.fh-kl.de/fachbereiche/imst/iuk-knowhow.html
next reply other threads:[~2013-06-11 15:22 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-11 15:22 Patrick Ziegler [this message]
2013-06-12 20:50 ` [Buildroot] [PATCH v2] usb_modeswitch: bump to version 1.2.6 Peter Korsgaard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51B740AC.5010406@fh-kl.de \
--to=patrick.ziegler@fh-kl.de \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox