From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arnout Vandecappelle Date: Thu, 12 Sep 2013 23:57:04 +0200 Subject: [Buildroot] [PATCH 2/3] Add support for BR2_EXTERNAL In-Reply-To: References: <1378646129-4167-1-git-send-email-thomas.petazzoni@free-electrons.com> <1378646129-4167-3-git-send-email-thomas.petazzoni@free-electrons.com> <52322C8E.7010501@mind.be> <5232351D.3030703@mind.be> Message-ID: <523238B0.3050500@mind.be> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On 12/09/13 23:51, Ryan Barnett wrote: > > > In order to utilize the BR2_EXTERNAL feature I must have BR2_EXTERNAL > > > either exported into my environment or be called as > > > > The Makefile exports it in the environment of the Kconfig targets. So > > once it is in the .config, it will stay there. Try it and you'll see :-) > > I have looked as I'm experiment with this and it definitely isn't there :) > Also according to the documentation you need to define it every time :) > Ah, yes indeed, sorry about that - I was trying to be too smart. To save it in the .config, it needs a prompt, and to be able to take it from the environment it needs a helper variable. Like BR2_DEFCONFIG. Regards, Arnout -- Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286500 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F