From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arnout Vandecappelle Date: Tue, 08 Oct 2013 21:08:20 +0200 Subject: [Buildroot] [PATCH 1 of 4] i2c-tools: add license information In-Reply-To: <8d5a6b127c579be29db4.1381226815@argentina> References: <8d5a6b127c579be29db4.1381226815@argentina> Message-ID: <52545824.70907@mind.be> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On 10/08/13 12:06, Thomas De Schampheleire wrote: > Signed-off-by: Thomas De Schampheleire > > --- > package/i2c-tools/i2c-tools.mk | 2 ++ > 1 files changed, 2 insertions(+), 0 deletions(-) > > diff --git a/package/i2c-tools/i2c-tools.mk b/package/i2c-tools/i2c-tools.mk > --- a/package/i2c-tools/i2c-tools.mk > +++ b/package/i2c-tools/i2c-tools.mk > @@ -7,6 +7,8 @@ > I2C_TOOLS_VERSION = 3.1.0 > I2C_TOOLS_SOURCE = i2c-tools-$(I2C_TOOLS_VERSION).tar.bz2 > I2C_TOOLS_SITE = http://dl.lm-sensors.org/i2c-tools/releases > +I2C_TOOLS_LICENSE = GPLv2 All files are GPLv2+ AFAICS. Only py-smbus/setup.py claims that the package is GPLv2, but that's just wrong. Regards, Arnout > +I2C_TOOLS_LICENSE_FILES = COPYING > > define I2C_TOOLS_BUILD_CMDS > $(MAKE) $(TARGET_CONFIGURE_OPTS) -C $(@D) > _______________________________________________ > buildroot mailing list > buildroot at busybox.net > http://lists.busybox.net/mailman/listinfo/buildroot > > -- Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286500 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F