From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bernhard Schuster Date: Wed, 16 Oct 2013 22:45:32 +0002 Subject: [Buildroot] glib-networking when using gtlsconnection fails Message-ID: <525f1695.8d640f0a.7250.08ee@mx.google.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net I cleaned all direct dependencies manually via -clean and removing the apropriate .stamp_ entries in the output/build directory. Demo code https://github.com/drahnr/buildrootbugdemo Note: I do not have the machine at hand to test it right now, but I'd really appreciate if somebody could give it a whirl. Thanks a lot! Best Bernhard On Wed, Oct 16, 2013 at 5:56 PM, Thomas Petazzoni wrote: > Dear Bernhard Schuster, > > On Wed, 16 Oct 2013 15:50:51 +0002, Bernhard Schuster wrote: > >> I am trying to cross compile a application which works just fine on >> my >> x86_64 machine for a ARMv5TE "gadget". Unfortunately something >> really >> weird happens: Altough having selected gnutls in order to use TLS >> with >> glib-networking (GTlsConnection), I always get an error as soon as >> the >> combined cert/key pem file is read (it exists, has proper >> permissions, >> all tripple checked). The error always contains "TLS unsupported" >> or >> "no TLS support" (can not recall, currently away from that machine) >> altough the config.h of glib-networking says the opposite. The >> binary >> is statically compiled (which worked fine so far). >> >> I am puzzled on how to fix my issue, I already tried to fix it by >> adding a couple of commandline opts explicitly (though they say >> that >> they are enabled by default, thus - as expected - nothing changed). >> >> Also note that I have a similar issue with pcre (required for >> GRegex), >> where I pass --enable-utf8 but it still did not fix anything. >> >> Any help, hint, tip is appreciated. >> >> Buildroot 2013.08 is used together with the code sourcery 2011/2013 >> toolchain >> > Just to be sure: did you do a complete "make clean all" cycle after > adjusting your configuration to enable gnutls, or after adding > --enable-utf8 to pcre? > > Remember that Buildroot does not automatically rebuild packages: if > you > enable gnutls, it will build gnutls, but it will not rebuild > glib-networking automatically. > > If you can provide a simple test case (or maybe even an existing test > application for glib-networking) to reproduce the problem, it would > definitely be helpful. Same for the pcre / GRegex problem. > > Best regards, > > Thomas > -- > Thomas Petazzoni, CTO, Free Electrons > Embedded Linux, Kernel and Android engineering > http://free-electrons.com > -------------- next part -------------- An HTML attachment was scrubbed... URL: