From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arnout Vandecappelle Date: Thu, 24 Oct 2013 21:53:03 +0200 Subject: [Buildroot] [PATCH] Added initial support for Freescale i.mx6 sabreauto board In-Reply-To: References: Message-ID: <52697A9F.3000707@mind.be> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On 24/10/13 19:28, Abdul Hussain wrote: > Signed-off-by: Abdul Hussain > --- > configs/imx6qsabreauto_defconfig | 1132 ++++++++++++++++++++++++++++++++++++++ Please use a defconfig, not a full config. The easiest way to generate it is to set BR2_DEFCONFIG to configs/imx6qsabreauto_defconfig, and then run 'make savedefconfig'. > system/device_table_dev.txt | 2 +- You should mention in the commit message that you did this change and why. Regards, Arnout > 2 files changed, 1133 insertions(+), 1 deletion(-) > create mode 100644 configs/imx6qsabreauto_defconfig -- Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286500 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F